Question about 1994 Subaru Loyale
I think its under the glove compartment.
Posted on Dec 02, 2012
Testimonial: "Thank you, how do I get to the blower motor and how do I test it "
A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
one of two solutions:
The contacts on your fan switch are bad, or you striped the knob and it won't turn the switch on, or the big bad one...your fan motor has decided it needs a vacation.
Hope this helps you, and I hope it's just the knob is stripped..it's the lesor of two evils
Posted on Dec 31, 2008
the only way to get the water out isto drill a hole in the bottom of the headlight assemly. they don't come apart. drill very slowly.
hope this helps
please rate well.
Posted on Mar 06, 2009
is the blower motor not blowing or the fan on the radiator not working? didn't say exactly which it was. If it's the blower motor and the fuse is good, it could be one of 4 things. Broken wire, bad fan speed switch, bad resistor switch (controls fan speed) or bad blower motor. Check for power to the fan speed switch, if it's good move to the resistor switch( this switch is normally located near the blower motor and is bolted to the air box to keep it cool) Pull it out and check it. It could be burnt up. If so, replace it but before doing so check to see if your blower motor works by hooking it straight up to a power source. Most of the time on older vehicles the resistor goes out due to excessive dust build-up and finally burns the coils out or it just dies of old age.
Posted on Aug 16, 2009
If you're a home mechanic, this job is simply too difficult to do. Unless you have a transmission jack and an engine hoist, this task is better put in the hands of a mechanic with a professional garage. However, if you do have these tools, you will find the clutch at your local auto parts dealership and sometimes the how-to information is enclosed with the part. If not, purchase a Hane's manual that is specific to your car. Remember, though, heavy tool set will be required.
Posted on Jan 02, 2010
Testimonial: "Thank you for your advice, thats what I thought...not sure it'll be worth it $$$. Thanks again"
Both the turn signal and hazard warning flashers are mounted on the fuse panel.
To remove a relay, simple pull the relay out. When installing a relay, make sure the terminals on the relay line up with the terminals in the fuse panel.
Most of the replaceable fuses for the electrical system are located on the fuse panel under the instrument panel, to the left of the steering column. In addition to the plastic fuses installed in the fuse box, there are 1 or more circuit breakers and a flasher relay.
For access to the fuse panel, remove the fasteners from the lower edge of the cover, then pull the cover downward until the spring clips disengage from the instrument panel. On the base models, the cover simply snaps on and off.
The locations of various fuses are illustrated in the owner's manual, and in some cases, on the cover of the fuse panel (in the pic check inside the circle).
Hope that helps.
Posted on Jan 22, 2010
Tips for a great answer:
Jan 26, 2014 | 1992 Subaru Loyale
Nov 06, 2012 | 1991 Subaru Loyale
Nov 07, 2017 | 1990 Subaru Loyale
Sep 22, 2011 | 1991 Subaru Loyale
Dec 07, 2009 | 1991 Subaru Loyale
Aug 16, 2009 | 1992 Subaru Loyale
Feb 11, 2009 | 1992 Subaru Loyale
Dec 31, 2008 | 1994 Subaru Loyale
Nov 24, 2008 | 1992 Subaru Loyale
Nov 11, 2011 | 1994 Subaru Loyale
113 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: