Question about Cars & Trucks

2 Answers

Montero Sport 99 crank but no start,what could be the problem?

We change the Crank Sensor,the Cam sensor and still won't start.

Posted by on

  • 4 more comments 
  • jsalome64 Dec 02, 2012

    I checked the fuel pump is OK, the injectors work fine,crank sensor,cam sensor,dist.wires,spark plugs,but I don't know how to check the ign.coils and the ign. module to see if any of them is failing, because I can't replace every part in the ignition system.

  • jsalome64 Dec 02, 2012

    I would like to find out why there is power everywhere but there is not spark,so can some one tell me what is stopping the power to spark. Again how do I know if the coils are fine?

  • teds repairs
    teds repairs Dec 02, 2012

    there should be a relay to the ignition coil

  • teds repairs
    teds repairs Dec 02, 2012

    there is one ignition control module for all spark plugs shoot for that

  • jsalome64 Dec 03, 2012

    Guys,thanks for helping me with my Montero, I got a new Ignition Module and changed the Coils too,the car is cranking and almost starts but it smells like gas under the hood and does not start but at least gave me the impression that part of the problem is solved,however, I would like to ask you guys again, what could cause this gas smells,I don't see any leaks of gas,but I know that something is not right,what do you guys think it could be? thanks.

  • jsalome64 Dec 03, 2012

    Thank you Teds Repair,I changed already the Ign.Module and the coils,but now there is some gas leak some were it smells like gas is leaking but I can't see anything,one thing I'm sure now,the problem or part of it is fuel,I checked the fuel pump and works fine. Can you tell me what else should I check to see where that smells is coming from and if that could be the reason now for my Montero no to start?Thanks again.

×

2 Answers

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Governor:

    An expert whose answer got voted for 20 times.

    Filmmaker:

    Uploaded 5 video answers.

  • Expert
  • 104 Answers

Check if there is any spark also check the injector pulse. huck up a scanner and check the if there are any DTC set.

Posted on Dec 02, 2012

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Cars & Trucks Master
  • 2,101 Answers

When you turn the key to the start position do you hear the fuel pump

Posted on Dec 02, 2012

  • teds repairs
    teds repairs Dec 03, 2012

    when a car has no spark the gas keep coming and floods the cylinders.try taken out all the spark plugs and drying the it out

×

3 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 2 Answers

SOURCE: 1995 sc riviera won't start

it me at johnloyd26@yahoo.com with all the problems and ill help

Posted on May 03, 2009

  • 5 Answers

SOURCE: my 1997 chevy venture won't start crank only but

97 chevy venture = that didnt work - intermittant start - wont stay running - computer& wiring/fuse box replaced - now interor guage &alarms &accymalfunctioning

Posted on Sep 09, 2012

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

I have a 2001 montero sport es 3.0. It wouldn't start one morning. This happened b4 and I went back next day, unplugged the maf sensor and it started, rough, but ran.. I plugged in maf and it ran


Did that work this time? Did you get a "check engine" light? Get the code read?

Unfortunately, "won't start" can be caused by so many different things we really can't begin to help you with what you've said.

Nov 16, 2015 | Cars & Trucks

1 Answer

96 jeep laredo stopped running gages quit and won't start even after replacing crank shaft sensor but it turns over like it wants to start


Crank sensor wont have any effect on starting, Cam position sensor would. Also check all your fuses.

Mar 27, 2013 | Cars & Trucks

1 Answer

4x4 v8 1998 dodge truck won't start


well if ur not getting spark and u changed all of the ignition components lets think about the computer in order for the ignition to work you have crankshaft position sensor that fires the fuel injectors and the spark change that and if still nothing then change the camshaft postion sensor that sensor tells the computer that the 1 piston has came all the way up and it tells the crankshaft sensor to do its thing

Feb 21, 2013 | 1998 Dodge Ram 1500 4WD

1 Answer

99 Plymouth breeze won't start


what is the other posible reason a 99 plymouth breeze wont start it rolls over well i change the crank sensor,camshft sensor,ignation coil but won't start

Dec 28, 2012 | 1999 Plymouth Breeze

1 Answer

My 1996 F450 7.3 diesel engine crank over but won't start, I have change the cam sensor, but still doesn't start


First, check the condition and operation of the following:

1) Spark plugs, leads and coil(s)
2) Air filter
3) Fuel filter and pump operation.

Nov 18, 2012 | Ford Cars & Trucks

1 Answer

I have an 03 montero sport 3.5, the crank sensor (or at least the code for) has been changed twice in a few months and it just went out again... (one week later). it stasrts sometimes and shimmies, sh


just because the code said crank sensor that does not mean it is the sensor. have you tested the wiring to sensor? this problem may be bad wire or wiring, a bad ground to computer or another sensor that is killing the 5 volt power to crank sensor. testing must be done, sensors just do not go bad, you got a dealer sensor too. dont get me wrong there are defective parts out there ,most of these are made in china, also make sure the tone ring that rides across the sensor is good.

Oct 21, 2012 | 2000 Mitsubishi Montero Sport

1 Answer

Code p1391 99 grand cherokee limited 4.7 wont start


Try unplugging the cam sensor and then try to start. The cam sensor is on the underside of the passenger head towards the front of the engine. Is is accessible from under the vehicle. If it starts replace the cam sensor. Iffy it still does not start replace the crank sensor and the cam sensor. The crank sensor is located on the passenger side of the engine block behind the starter. The starter will need to be remove to acces the sensor. Let me know if you have any questions and I'll do my best to answer them. Thank you for using FixYa.com!

Mar 11, 2012 | Cars & Trucks

1 Answer

99 Jeep Cherokee Sport, 4.0L -won't start


you need to have it connected to an OBD2 machine and watch if you are missing the cam sensor showing RPMs
or if your missing crank sensors RPMs,
it could be a wiring problem or computer if your seeing the RPMs from both sensors,and the last thing i would check is hooking up a fuel gauge to the reed valve and watch what fuel pressure you have while cranking,if the cam sensor is the culprit it will turn the fuel off after the cranking.

Jan 11, 2010 | 1999 Jeep Cherokee

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

86 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

yadayada
yadayada

Level 3 Expert

75822 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...