Question about Cars & Trucks

1 Answer

How to remove starter motor from 1997 kia sportage

Are there 2 or 3bolts to remove

Posted by on

  • Anonymous Mar 17, 2014

    2007 kia starter motor removal

×

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Cars & Trucks Master
  • 5,316 Answers

Most cars only have 2 starter bolts, but some do have 3. An older honda had a third starter bolt from the back side of the transaxle into the starter.
Pull off the electrical connectors, then remove the starter bolts you can see. If the starter is not completely loose now, there must be a third bolt. Check around the starter mounting rim, also on the back side. Good luck.

Posted on Dec 02, 2012

Testimonial: "thank you found two but third is hard get to"

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad
  • 3 Answers

SOURCE: REPLACE STARTER IN 1999 KIA SPORTAGE?

at the right side of the vehicle under the battery there is the starter bolted by three screws you need to get under the vehicle to loose the screws use a 14mm socket and wrench to get the bolt loose it takes a bit of maneuvering to get it out of the tight space but it is possible and simply reverse to get the new one in remember to disconnect the battery and the lines to the starter before starting to work.

Posted on Dec 05, 2008

  • 7 Answers

SOURCE: Removal of starter for a 2000 Kia Sportage

YOU HAVE TO DO IT FROM THE BOTTOM THERE IS 1 12mm BOLT AND 1 NUT AND IT SHOULD COME OUT

Posted on Feb 13, 2009

  • 3 Answers

SOURCE: i need to replace the starter on kia sportage and

go to www.kiatechinfo.com sign up it's free great place no one makes a repair manual for us, hope this helps

Posted on Apr 05, 2009

c17hydro
  • 2984 Answers

SOURCE: the easiest way to pull the heater core from a kia sportage-2000

There is no real easy way to do it....not like the older cars..

  1. Disconnect the negative battery cable.

    CAUTION After disconnecting the negative battery cable, wait for at least 10 minutes for the air bag module to deplete its stored energy.

    1. Remove the driver’s side air bag and steering wheel by performing the following procedure:
    2. Position the front wheels in the straight-ahead position.
  2. Remove the 4 steering wheel-to-air bag module bolts.
  3. Carefully, lift the air bag module and disconnect the electrical connector.

    CAUTION Place the air bag module in a safe location with the front facing upward.

  4. Remove the steering wheel-to-steering column nut.

    NOTE If may be necessary to mark the steering wheel to steering column alignment.

  5. Using a steering wheel puller, press the steering wheel from the steering column.
  6. Drain the cooling system into a clean container for reuse.
  7. Discharge and recover the air conditioning system refrigerant.
    1. Remove the instrument panel by performing the following procedure:
    2. Remove both the rear and front consoles.
    3. Remove the knee bolster assembly.
    4. Remove the “T” bar section.
    5. Remove the relay bracket.
    6. Remove the turn signal assembly and the upper/lower steering column covers.
    7. Remove the hood release handle lockscrew, the hood release handle and the cable assembly nut.
    8. Remove the left side front pillar trim and the lower left side cover.
    9. Remove the 2 left side of the “T” bar-to-chassis bolts.
    10. At the left side of the instrument panel, remove the 3 instrument panel-to-chassis bolts.
    11. Remove the ashtray.
    12. Remove the center panel trim.
    13. Remove the ventilation control panel.
    14. At the center of the windshield next to the windshield, remove the cap and the mounting bolt.
    15. " Remove the right side front pillar trim and the lower right side cover.
    16. Remove the 2 right side of the “T” bar-to-chassis bolts.
    17. At the right side of the instrument panel, remove the 3 instrument panel-to-chassis bolts.
    18. Remove the steering column-to-instrument panel bolts and lower the steering column.
    19. Disconnect the instrument panel electrical connectors.
    20. Remove the instrument panel.
    1. Remove the blower/evaporator housing by performing the following procedure:
    2. Disconnect the air conditioning refrigerant lines from the evaporator core and discard the gaskets. Plug the openings to prevent contamination.
  8. Disconnect the fresh air control cable from the blower/evaporator housing inlet duct.
  9. Disconnect the 5 connectors from the bottom of the blower/evaporator housing.
  10. Move the carpeting from the bulkhead to gain access to the hole cover plate.
  11. Remove the 4 hole cover plate nuts and the plate.
  12. Remove the 2 upper blower/evaporator housing bolts.
  13. Remove the 2 lower blower/evaporator housing-to-bulkhead nuts.
  14. Remove the blower/evaporator housing.
  15. Disconnect the heater hoses from the heater core.
  16. Remove the temperature control cable from the heater housing.
  17. Remove the 2 lower heater housing nuts and the upper heater housing-to-bulkhead nut.
  18. Remove the heater housing.
    1. Disassemble the heater housing by performing the following procedure:
    2. Remove the seal from the heater core tube connections.
    • Remove the vent seal.
    • Remove the 2 wiring harness-to-heater servo screws.
    • Remove the 8 heater housing clips located on the servo side (left side).
    • Remove the left side of the heater housing.
    • Remove the 6 heater housing assembly clips.
    • Remove the 4 heater core tube mounting bracket screws and the bracket.
    • Remove the 8 remaining heater housing clips and disassemble the housings.
    • Remove the heater core from the housing.

  • f277857.gif
    Exploded view of the heater core and heater housing assembly—Kia Sportage


    THIS IS JUST TO REMOVE IT!

    Posted on Oct 18, 2009

    roniecon
    • 6826 Answers

    SOURCE: Hav Kia Sportage 1997. Alarm system not working

    The alarm system is under the console,it can be crossed out on the right wires.

    Posted on Oct 28, 2009

    Add Your Answer

    Uploading: 0%

    my-video-file.mp4

    Complete. Click "Add" to insert your video. Add

    ×

    Loading...
    Loading...

    Related Questions:

    1 Answer

    Starter does not engage. Only clicks when I turn the key.


    The first thing to do is to check the condition of the battery cables/terminals. Make sure they are clean, free from corrosion and are tight. Also check the black earth lead where it connects to the block/bodywork. A poor earth can cause the symptoms you describe.

    If that doesn't work, disconnect the positive battery cable (but bear in mind that you may lose the radio code.. do you know your radio code?) and then disconnect, clean the cables on the starter motor.

    If that does not do anything - suspect the starter motor solenoid. It can be removed and cleaned (remove the starter motor first). You can 'bridge' the terminals on the solenoid with a screwdriver to try and start the car... but be careful.

    kia sportage 2 0 starter motor
    2007 kia sportage 2 0 starter motor Google Search

    Mar 25, 2016 | 2007 Kia Sportage 2.0

    1 Answer

    1997 kia sportage Passenger power window stopped working from both driver's side and passanger side. Which door panel do i remove? What Next?


    Sounds like the motor is bad.remove passenger panel check for voltage at motor ,if no voltage wiring is broken .if there is voltage replace motor

    Jul 20, 2014 | 1997 Kia Sportage

    1 Answer

    How do I remove the starter on a 2000 Kia Sportage with 4WD?


    It has three bolts that need to be removed. There is a support bar attached to the engine block and bottom of intake manifold. Remove this and the starter will drop down.

    Nov 21, 2010 | 2000 Kia Sportage

    1 Answer

    Where do i find the starter on a 1998 kia sportage? and how do i install new one?


    IT SITS UNDER THE MOTOR IT SHOULD BE ON THE PASENGER SIDE LOOK WERE THE TRANSMISSON AND THE MOTOR MEET WHEN U FIND IT THERE SHOULD BR TWO WIRES THAT NEED TO BE TAKING OFF BESIDES THE TWO BOLTS HOLDING THE STARTER ON DISCONNECT THEM ALLAND IT SHOULD COME OUT GOOD LUCK

    Jun 30, 2010 | 1998 Kia Sportage

    2 Answers

    I have a 1997 kia overheating i have removed the thermostat


    You have to install a new Thermostat because if the motor has no water pump thermostat sends all the coolant to the radiator and therefore the engine never warmed and you will not have heat because the coolant never be heated

    Jan 08, 2010 | 1999 Kia Sportage

    1 Answer

    How do take a starter off a 1998 kia


    you have to remove the bracket going from the underside of intake to th block the bottom of the bracket is held in by a motor mount bolt reinstall this bolt after removing bracket then one or both bolts come from trans to starter be sure to get ground wires back on bolts during reinstall you dont have to reinstall bracket it does nothing except get in the way of removing the starter

    Aug 03, 2009 | 1998 Kia Sportage

    2 Answers

    Removal of starter for a 2000 Kia Sportage


    YOU HAVE TO DO IT FROM THE BOTTOM THERE IS 1 12mm BOLT AND 1 NUT AND IT SHOULD COME OUT

    Jan 28, 2009 | 2000 Kia Sportage

    Not finding what you are looking for?
    Cars & Trucks Logo

    Related Topics:

    96 people viewed this question

    Ask a Question

    Usually answered in minutes!

    Top Cars & Trucks Experts

    yadayada
    yadayada

    Level 3 Expert

    76051 Answers

    Colin Stickland
    Colin Stickland

    Level 3 Expert

    22156 Answers

    Randy Ohler

    Level 3 Expert

    14585 Answers

    Are you a Car and Truck Expert? Answer questions, earn points and help others

    Answer questions

    Manuals & User Guides

    Loading...