Question about Cars & Trucks

1 Answer

Howtoremovestartermotor are there 2 or 3 bolts

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Filmmaker:

    Uploaded 5 video answers.

  • Expert
  • 104 Answers

On what kind of car what year and what size motor

Posted on Dec 02, 2012

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Workshop manual for a 1994 nissan serena


Cylinder head bolt torque sequence
The Rod Bearing Cap Torque
The Main Bearing Cap Torque 38 Foot pounds (Final torque)


Step 1: Torque 10-12 Ft/LbsStep 2: Torque 17-21 Ft/Lbs


Note :
Torque sequence ------------------------
' 11 '
front ' 13 9 3 1 6 8 '
of ' '
engine ' 14 7 5 2 4 10 '
' 12 15 '
------------------------
Step 1: Torque all bolts in sequence 22 Ft/Lbs
Step 2: Torque all bolts in sequence 47 Ft/Lbs
Step 3: Loosen all bolts in reverse sequence
Step 4: Retorque all bolts in sequence 22 Ft/Lbs
Step 5: Retorque all bolts in sequence 43-51 Ft/Lbs
Step 6: Retorque bolts 11 thru 15 in sequence an
additional 4-6 Ft/Lbs
** CAUTION ** This engine uses 2 different length head
bolts. "#1" Is the long bolt, while remaining bolts
are short. **Do not confuse location of these bolts**
recheck final torque in sequence

Dec 06, 2012 | Cars & Trucks

1 Answer

Need the torque specs for the straight six 300 ford motor


Here is the spec for 1977 through 1984 on the Ford 300 or so called now the 4.9 engine:
Cylinder head bolts: 70-75 lbs. The sequence is driver's side starting on bolt one (fifth bolt in line of bolts or center of line of bolts) and going straight across to bolt 2 on passengers' side and then to the side of bolt 2 is bolt 3 and back across to bolt four to the right of bolt 1. This is done in a zig -zag pattern until all bolts are torqued to recommended torque.

segon s version
rear front
13 9 5 1 4 8 12 torque specs are in three steps
11 7 3 2 6 10 14 1) 55lbs 2) 65lbs 3) 85 lbs
all info from the book

Sep 25, 2010 | 1981 Ford F 100

1 Answer

What is the right Torque Specification of the cylinder head bolt,main bearing and connecting rod bearing for a 1997 Ford F 150 4.2 liter? Thank you...


Cylinder heat bolt torque:
Torque sequence --------- front | 7 3 1 5 | | 8 4 2 6 | --------- Step 1: Torque all bolts in sequence to 14 Ft/Lbs Step 2: Torque all bolts in sequence to 29 Ft/Lbs Step 3: Torque all bolts in sequence to 36 Ft/Lbs Step 4: in the sequence, loosen the cylinder head bolts three turns. Step 5: Tighten short bolt to 15 - 32 Ft/Lbs Step 6: Tighten long bolt to 30 - 36 Ft/Lbs Step 7: Tighten all bolt to 175- 185 degree note: Do not loosen all of the cylinder head bolts at one time. Each cylinder head bolt must be loosened and the final tightening prior on the next bolt in the sequence.
Main bearing torque:
Torque sequence: Step 1: torque bolts to 91 Ft/Lbs with the exception of the rear main bearing cap Step 2: torque rear main bearing cap bolts to 88 Ft/Lbs Step 3: torque brace bolts to 40 Ft/Lbs
Connecting rod torque:
Torque sequence Step 1: Torque to 29 Ft/Lbs Step 2: Turn an additional 90 degrees

May 17, 2010 | 1997 Ford F150 Regular Cab

1 Answer

Torque settings wanted for cylinder head bolts engine type d7f


D7F ENGINE
Preseating the gasket
Tighten all the bolts to 2 daN.m, then angle tighten to 90°
Wait 3 minutes settling time.
Tightening the cylinder head:
The cylinder head is tightened in stages, applying
the following procedure successively to
bolts 1-2 then 3-4, 5-6, 7-8 and 9-10.
- Slacken bolts 1-2 until they are completely free.
- Tighten bolts 1-2 to 2 daN.m, then angle tighten to 200°.
Repeat the slackening and re-tightening operation
for bolts 3-4, 5-6, 7-8 and 9-10.
I hope this is useful, Enjoy

Apr 23, 2010 | 2000 Renault 181

1 Answer

Hi what is the head torque on a 2002 honda civic


Dont forget to apply clean engine oil to the threads of each bolt for proper torquing. Then finger tighten. Then

    1. Tighten the cylinder head bolts to their final torque specification in 4 steps. Use a crisscross sequence starting with the bolts at the middle of the head and working toward the outer bolts as follows: Step 1: Tighten each bolt to 14 ft. lbs. (20 Nm).Step 2: Tighten each bolt to 36 ft. lbs. (49 Nm).Step 3: Tighten each bolt to 49 ft. lbs. (67 Nm).Step 4: Retighten only the 2 center bolts to 49 ft. lbs. (67 Nm).
    1. Step 1: Tighten each bolt to 14 ft. lbs. (20 Nm).
    2. Step 2: Tighten each bolt to 36 ft. lbs. (49 Nm).
    3. Step 3: Tighten each bolt to 49 ft. lbs. (67 Nm).
    4. Step 4: Retighten only the 2 center bolts to 49 ft. lbs. (67 Nm).


  • Mar 25, 2010 | 2002 Honda Civic

    1 Answer

    Does any one have the torque specs and sec for a 1999 dodge neon 2.0 dohc


    Standard Head Gasket

    Step 1: Tighten bolts 1-6 to 25 Ft. Lbs. (34 N.m) and bolts 7-10 to 20 ft. lbs. (28 N.m).
    Step 2: Tighten bolts 1-6 to 50 Ft. Lbs. (68 N.m) and bolts 7-10 to 20 ft. lbs. (28 N.m).
    Step 3: (Repeat Step 2) Tighten bolts 1-6 to 50 Ft. Lbs. (68 N.m) and bolts 7-10 to 20 ft. lbs.
    (28 N.m).
    Step 4: Tighten all bolts an additional 1/4 turn (DO NOT use a torque wrench for this step).

    Multi-Layer Steel (MLS) Head Gasket

    Step 1: Tighten bolts 1-6 to 25 Ft. Lbs. (34 N.m) and bolts 7-10 to 20 ft. lbs. (28 N.m).
    Step 2: Tighten bolts 1-6 to 50 Ft. Lbs. (68 N.m) and bolts 7-10 to 35 ft. lbs. (47 N.m).
    Step 3: (Repeat Step 2) Tighten bolts 1-6 to 50 Ft. Lbs. (68 N.m) and bolts 7-10 to 35 ft. lbs.
    (47 N.m).
    Step 4: Tighten all bolts an additional 1/4 turn (DO NOT use a torque wrench for this step).

    Tightening sequence

    * Clean and oil threads before installation.

    Dec 02, 2009 | 1999 Dodge Neon

    2 Answers

    My 1998 chev. K2500 has both 2 & 4 bolt main caps .


    what do you mean it has both? either they are 4 ,or they are 2 ....if any of the main brg caps have 4 bolts holding them in, thats a 4 bolt main block. IF the rest of the truck is nice, then its worth it, if its ratty, then no. you may be better off buying a remanufactured engine from a good company that offers a good warranty. remember you will need to replace a lot af parts, water pump, spark plugs, get radiator cleaned, belt, tensioner, motor mounts. ....you want to replace everything you can while the engine is out. plan on $500.00 extra as a buffer.

    Sep 25, 2009 | 1998 Chevrolet K2500

    2 Answers

    Angle Torque settings head bolts


    Use new bolts, tighten in the following stages 1. 20Nm 2. 100Nm 3. wait 3 mins 4. slacken bolts 1&2 retighten to 20Nm +110 degrees 5. carry out stage 4 for bolts 3,4,5 & 6 then bolts 7,8,9 &10 Sequence, 8 4 1 5 9 7 3 2 6 10 Bolts 9 & 10 are flywheel side of the engine.

    Jan 28, 2009 | 2000 Renault Sportwagon

    1 Answer

    Looking for the torque specs for 1998 chevy astro van?


    1998 chevy astro 4.3 v6 torque specs include :
    * foot pounds *
    balance shaft (if equiped) gear bolt = step 1 = 15 ft.lbs. step2 = additional 35 degrees.
    camshaft sprocket bolt = 18 ft. lbs.
    connecting rod cap = step 1 = 20 ft. lbs. step 2 = additional 70 degrees.
    crankshaft damper bolt = 74 ft. lbs.
    crankshaft oil deflectorbolt/nut = 27 ft.lbs.
    cylinder head bolts = step 1 = 15 ft. lbs. step 2 = additional 73 degrees. (tighten in sequence)
    2811243.jpg


    exhaust manifold bolts = step 1 = 11 ft. lbs. step 2 = 22 ft. lbs.
    flywheel bolt = 74 ft. lbs.
    main bearing cap bolts = step 1 = 15 ft. lbs. step 2 = additional 73 degrees.
    oil filter adapter bolt = 15 ft. lbs.
    oil pan bolt/nut = 18 ft. lbs.
    oil pump bolt = 66 ft. lbs.
    rocker arm with press in studs = 18 ft. lbs.
    rocker arm with screw in studs = 19 ft. lbs.
    valve lifter retainer bolt = 12 ft. lbs.
    water pump bolt = 33 ft. lbs.
    * inch pounds *
    balance shaft retaining plate bolt = 106 in. lbs.
    camshaft retainer plate bolt = 106 in. lbs.
    front cover bolt = 106 in. lbs.
    intake manifold upper = step 1 = 44 in. lbs. step 2 = 88 in. lbs.
    intake manifold lower = step 1 = 27 in. lbs. step 2 = 106 in. lbs. step 3 = 133 in. lbs. ** (tighten bolts in sequence)

    cbb8861.jpg

    thanks for your vote !

    Dec 28, 2008 | 1998 Chevrolet Astro

    1 Answer

    Alternator


    There are 2 bolts that hold the alternator in position. One bolt is near the top of the alternator, the other is near the bottom. The bottom bolt threads through the end of the ADJUSTMENT bolt (which is at a 90 degree angle to this mounting bolt, and faces threaded end w/ adjustment nut to alternator). Loosen 2 mounting bolts, adjust tension at adjustment nut (near alternator), tighten 2 mounting bolts (upper bolt 33 ft lbs, Lower mounting bolt 18 ft lbs). countrycurt0

    Sep 09, 2008 | 1989 Honda Prelude

    Not finding what you are looking for?
    Cars & Trucks Logo

    Related Topics:

    11 people viewed this question

    Ask a Question

    Usually answered in minutes!

    Top Cars & Trucks Experts

    yadayada
    yadayada

    Level 3 Expert

    76691 Answers

    Colin Stickland
    Colin Stickland

    Level 3 Expert

    22219 Answers

    Randy Ohler

    Level 3 Expert

    14585 Answers

    Are you a Car and Truck Expert? Answer questions, earn points and help others

    Answer questions

    Manuals & User Guides

    Loading...