Question about Cars & Trucks

1 Answer

Is this also for a 2004 doidge durango smells like gas bucking and emissions imalfunctions indicator light coming on

Smells like gas bucking and emissions indicator light coming one

Posted by on


1 Answer

Since you have a dash light on--there should be
no wondering what to do

Check for codes,every time

Have to resolve codes related issues first

Posted on Dec 02, 2012


6 Suggested Answers

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017

  • 18 Answers

SOURCE: 1999 dodge durango seems to sputter and buck

I agree with Krazy.... I own a 98' D. and generally keep it tuned up every 20-30k. You might also check the air filter as well. Regular service will keep your D on the road a long time.

If you have the cash, get a K&N filter for it. It will help improve your mileage slightly, and a little added acceleration never hurts. :)

Something fun:

I stage 2 chipped mine, put the K&N cold air intake kit (replaced the air box for the direct air tube), put stainless headers on, replaced the exhaust with 3" stainless high flow. I also replaced the coil, cap, and wires to MSD. The truck will still like the standard Champion plugs. All of this put my little 318 at 17MPG and over 350HP (365ish).

Posted on Mar 03, 2009

  • 3 Answers

SOURCE: 2004 Hyundai Sonata Malfunction Indicator light

It sounds like you need a new fuel filter. if that is to dirty, it wont allow the correct amount of full to be pushed to the engine. try changing that or using a Fuel treatment in the meantime. Hope this helps :)

Posted on Apr 10, 2009

  • 1201 Answers

SOURCE: Emissions Indicator came on! OH NO!!

It could be any sensor or leak anywhere in the emission system.
The best thing to do is to have a code scanner hooked up to the car to pin point the actual problem. If there ia an autozone or advanced auto near you go there, and tell them you need a code retrieved, if not call different auto part stores to find out if they do that. Takes about 30 seconds to get the code.

Posted on Apr 27, 2009

  • 138 Answers

SOURCE: 2004 Malibu Maxx gas smell from under tank.

If could be the correct fuel cap but defective

Posted on Aug 29, 2009

Testimonial: "Thank you. I'll buy a new cap and hope it works."

  • 14036 Answers

SOURCE: check engine light indicates emissions problem. i


Posted on Sep 26, 2009

Testimonial: "thanks a bunch!!!"

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

What does the part light indicates on the MPH 2004 dodge durango?

Hello, are you sure it show part light indicates? Maybe it says PARK, this light indicates that the emergency brake is ingaged. This is what you might be seeing. GB...stewbsion

Sep 24, 2011 | 2004 Dodge Durango

1 Answer

I have a 2000 pont sunfire and the check engnie light is blinking, not only that but it seems as if it wants to cut off when i am at a light or stop, it don't want to go when i push the gas peddle,I...

this usually indicates an emission problem that could cause motor or catalytic need to go to the shop and have code pulled from the computer to start diagnosing,the cat could be plugged up as you say when you try to accelerate the car won`t move normally,the gas smell indicates the motor is not burning fuel as designed and the white smoke indicates a possible coolant leak into the combustion chamber and being burnt.this car needs to be checked out at a shop before major damage occurs if it hasn`t already happened.

Jun 20, 2011 | 2000 Pontiac Sunfire

1 Answer

While driving my 2006 Dodge Durango, the malfunction indicator light was on and the engine cut out while I was driving - no exterior lights or power steering, but interior lights and radio were still on. ...

dodge durango cuts off when starting however , when I press on the gas it will stay started whats the issue ? Just had oil & change all fluids checked in may 2014 for a dodge durango . plan on taking a drive from seattle wa to California San Diego is it safe to do so ?

Jun 13, 2011 | 2006 Dodge Durango

1 Answer

Would like to buy dodge drango 2000 owners manual any idea where i may get one

Doidge Site 2004-current models are free. 2003MY and earlier are available for purchase. Are you try in eBay ?

Hope this helps.

Feb 01, 2011 | 2000 Dodge Durango

2 Answers

Engine chugging, like there is no gas but there is and a sulphar smell

the convertor is the problem.will cause decreased engine power, another sign is bucking and jerking upon accelerating. the car will lose power when going up a hill. if engine runs hotter then usual and coolant is up to par, may be a bad converter.

Jan 11, 2011 | 1998 Oldsmobile Intrigue

1 Answer

My 2000 dodge durango failed the emissions due to a bad catalytic converter... The check engine light did not come on. Could there be any other reason why it would fail?

really need more info on your durango ? millage , engine , other causes for poor emissions are weak motors , poor gas , tuneup problems and worn emission parts like lazy O2 sensors and catalytic converters

Apr 09, 2010 | 2000 Dodge Durango

1 Answer

Engine light on Codes show 1. Po 441 evaporation emission system incorrect purge flow 2. Po442 evap emission system leak (small) 2. 446 evap emission system incorrect purse flow 2004 Toyota Tacoma pickup...

Hello! Those three codes commonly indicate the followi possibilities:

The gas cap was not sufficiently tightenend ater fueling, a bad gas-cap rubber o-ring, the vehicle had the key in the 'on', or engine running, or the tank was filed all of the way up the neck.

Any one of the abope causes will set all three codes.

Dec 20, 2009 | 2004 Toyota Tacoma

2 Answers

Check engine light came on. Code P1456.

Did you change the gas cap with a Honda gas cap? Tighten it at least three clicks?
Also, Honda recommends that you never top off the tank when getting gas (only go to the click-off of the pump; otherwise you can get back flow into the system that will cause the code).
Tightening or replacing the cap will not immediately cause the light to go off; it can take up to three days of driving for the light to reset.
To check if your readiness codes (emission system) are set, turn the ignition to ON (II), without starting the engine. The Malfunction Indicator Lamp will come on for 20 seconds. If it then goes off, the readiness codes are set. If it blinks 5 times, the readiness codes are not set.
You can, of course, try resetting your engine light to see if it will come back on (which it probably will). I believe the procedure is:
Turn off the engine.
Press and hold the Select/Reset knob (odometer) in the instrument panel, then turn the ignition switch to ON (II).
Hold the knob for approximately ten seconds until the indicator resets.

Hope this helps you.

Nov 17, 2009 | 2004 Honda Pilot

1 Answer

The light only comes on when I have a full tank of

almost any auto parts place will read codes free buy a gas cap at a salvage yard 5-10 bucks

Jul 31, 2009 | 2004 Dodge Durango

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

43 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts


Level 3 Expert

76846 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides