Question about Cars & Trucks

Open Question

Replace light bulb on Rotec Vaporvac

The bulb has blown in the light in the range hood. There does not appear to be any quick solution such as unscrewing the glass cover plate. The only alternative appears to be to completely dis-assemble the hood, replace the bulb, and then re-assemble the hood.

Posted by Anonymous on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
  • 840 Answers

SOURCE: 2004 Maxima driving / fog light bulb replacement

if they are near the bottom of the bumper the only way is take the lower shield off and drop the lt and rt splash shields

Posted on Jan 25, 2009

Ad
  • 1 Answer

SOURCE: replacing license plate lights on Chevy Trailblazer

I just had the same problem. I took the cover off, saw the white bulb base, twisted it to take it out, but it popped back inside the door. I got it out, but it wouldn't pull through, so I twisted it back in place and went to Autozone to get new bulb. Once I saw the new bulb, it was obvious, just the bulb itself pulls out. There's so little room to work, I couldn't get it with just my fingers - - maybe rubber gloves would have worked, but I used pliers, lightly, wiggled it a little and it popped right out. I had a similar issue once with the taillight bulb and had to break the bulb and then grip the remaining filament wires with pliers to get it out, so that was my backup plan, just in case.

Hope this helps others.

Posted on Apr 19, 2009

ghost4548
  • 776 Answers

SOURCE: Fog Light Bulb 2008 Elantra

Simple to do.

3624ae9.gif

5e693d8.gif

Posted on Jun 20, 2009

  • 1986 Answers

SOURCE: Rear Light Bulb Replacement

unfortunately you will have to remove the assembly to get to the bulbs

Posted on Oct 01, 2009

  • 1 Answer

SOURCE: Headlight repair on 2003 Mercedes Benz E320

how do you change left low beam bulb on 2003 mercedes e320

Posted on Jan 04, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do I disconnect the power in order to replace the halogen light bulb


If the light is turned off you can safely replace it. If always on you may have to turn off the electrical circuit that supplies the hood.

May 15, 2016 | Cars & Trucks

1 Answer

Replased right front blinker bulb. when taking broken burnt bulb out of socket wires crossed i could smell somthing burning front bulb works now. but the rear running lights dont work and head lights


Get a multimeter check for DC voltage at the light sockets. No voltage means blown fuses. You can also use the multimeter to check the bulbs to see if they have somehow blown.

Dec 06, 2014 | 2001 Chevrolet Corvette

1 Answer

In the instrument panel there's this yellow light of a car with flashes coming from the back while i'm driving


You have a bulb in the rear of your car that is blown. Try turning the car off then back on without pressing the brakes. If the light does not come on, press your brake pedal down and then check to see if the light appears again. If it doesn't, your brake lights are okay. Next turn your park/headlights on. If the light appears in the panel, you have a blown rear bulb. The light will come on if any of the rear bulbs are blown so you will have to visually check it while the lights are on to see which one is defective. It's best checked at night or right before sunset so you can easily see which bulb needs to be replaced.

Jun 14, 2011 | 1998 Lexus ES 300

1 Answer

How to replace bulb in front bumper turn signal housing 1995 jag xj6


hello,
  • Identify the blown bulb. Note that if a headlight bulb has blown, the dip beam is on the outside and the high beam is on the inside. Turn off the ignition switch and light switches.

  • Open the hood and replace any blown headlight bulbs. Press the plastic spring clips and remove the bulb holder from the assembly. Pull the bulb out of the bulb holder and replace it with a new bulb. It only fits one way. Be sure not to touch the bulb's glass. Replace any parking lights at the same time, they are in the headlamp unit too.

  • Remove the front turn signal light unit in the bumper to change the turn signal bulb. Push gently on the inside edge and insert a blade between the bumper and the lens at the outside edge. Compress the spring and remove the lens. Fit a new lamp by inserting it into the plug. The side marker light is changed using a similar process.

  • Open the trunk to replace the rear fog light, stop light, tail light, reversing light and turn signal light. Remove the rear light cover and turn the bulb holder fastener 90 degrees counter clockwise. Remove the expired bulb, fit a new one and replace the parts, turning the bulb holder clockwise.

  • Thanks..

    May 21, 2011 | 1995 Jaguar XJ6

    1 Answer

    Light bulb under the front lens is blown out. how do you take off lense to replace light bulb/ ?


    The bulb is replaced from the rear, open the hood and you will see the socket that unscrews and pulls out then pull connector off the bulb and install new bulb.

    Jan 15, 2011 | 2000 Lincoln Town Car

    1 Answer

    Hi, we have a 2001 Tiburon, yesterday our son attempted to change the high beam bulbs.After completion he tried them, both the high beams and running lights were not working.The bulbs he used were...


    Hi,
    Thanks for the quick response. The problem has been solved. I rechecked the fusebox and found a blown 15A fuse I missed on the right side of box. Replaced the fuse and everything works fine!
    Thanks again.
    Dave

    Dec 21, 2009 | Hyundai Tiburon Cars & Trucks

    1 Answer

    The right rear turn signal blinks quickly in a


    I believe this car has a rear bulb that has two fillaments, one for side lights the other shared for braking and flash. sounds like a blown bulb or a bad ground connection. Check the bulb and the bulb holder and ground connection.
    Turn signal blinking quickly generally indicates a blown bulb front or rear or bad connection.

    Dec 20, 2009 | 1993 Mercury Cougar

    1 Answer

    Replace Headlight Bulb - 2003 Toyota Corolla


    Open the hood to gain access to the rear of the head light. simply unplug the light bulb, then twist then pull the bulb to remove. Do not touch the glass portion of the new bulb, the oils in your skin may cause the bulb to burn out quickly. reverse to install

    Nov 30, 2009 | 2003 Toyota Corolla

    1 Answer

    Brake lights not working, but middle brake light works.


    Try cleaning the contacts with a wire brush if they appear dirty and then apply a small amount of silicone to the bulb contacts also try replacing the bulb as sometimes they don't appear to be blown but are

    Jul 31, 2009 | 2003 Toyota Corolla

    Not finding what you are looking for?
    Cars & Trucks Logo

    Related Topics:

    56 people viewed this question

    Ask a Question

    Usually answered in minutes!

    Top Cars & Trucks Experts

    yadayada
    yadayada

    Level 3 Expert

    76848 Answers

    Colin Stickland
    Colin Stickland

    Level 3 Expert

    22246 Answers

    Randy Ohler

    Level 3 Expert

    14585 Answers

    Are you a Car and Truck Expert? Answer questions, earn points and help others

    Answer questions

    Manuals & User Guides

    Loading...