Question about 2005 Chevrolet Uplander

1 Answer

How much oil the engine takes a ulpander - 2005 Chevrolet Uplander

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 129 Answers

Most of the new engines now only hold 4.5 quarts with a new filter. That is 4 and a half quarts of oil.

Posted on Dec 02, 2012

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Oil pressure gauge reads high only when engine is running,oil level is fine


that is a sign of the wrong oil grade. that truck takes 5 w 20 oil

Jan 26, 2013 | 2005 Chevrolet Silverado

2 Answers

HOW MANY QTS, OF OIL DOSE IT TAKE


okay, you forgot to list the engine size so i will give you all the listings for all the engines that come in this 1995 F250, hope this helps, also this is with filter change.
The following engines 4.9, 5.0, 5.8,and the 7.5 engine all take 6qts of oil.

the 7.3 desel engine takes 14qts of desel oil, good luck.hope this is what you needed.have a good day.

Feb 13, 2011 | 1995 Ford F250

3 Answers

What kind of oil does a 2002 BMW 7 series take?


engine oil?? any multigrade i would recomend that you use the cheapest petrol/diesel oil from a supermarket then change oil every 6000m and a oil filter every third oil change this will keep the inside of the engine clean and free from gunk and muck which can block the oil pick up pipe filter and cause the engine to seize

Aug 10, 2010 | 2002 BMW 7 Series

1 Answer

My vw golf 1.6 16v is leaking oil, when u take the plastic air filter cover off theirs a 1 inch pipe on the engine breathing out, and the oil is cumin out of the pipe


That is the recirculating tube that comes from the engine block. Oil can come out of it on only 2 occasions:
1 - the level of the oil is way too high - either you have put too much (take it out) or the coolant spills in the carter (major malfunction, the engine is about to die).
2 - the engine is so worn out that the back pressure that escapes from the cylinders takes the drops of oil that are spewed by the crankshaft with it out of the carter - the engine is practically dead.

Jun 21, 2010 | 2001 Volkswagen Golf

2 Answers

Engine oil type and capacity for 1999 Pontiac Sunfire SE


You did not specify the engine size but I looked them both up.They take 5w-30 and both take 4 qts.Hope this helps.

Mar 14, 2010 | 1999 Pontiac Sunfire

2 Answers

How many quarts of oil does a 81 ford ranger xlt take.


More than likely it takes 4.5 quarts or possibly 5 with oil/filter change. But to make sure there is an easy way to find out. Park the vehicle on a level surface. Drain all the oil out and change the filter. Now pour in 4 quarts of the correct weight oil, and start the engine. Let it run for 30 seconds and then shut down for 30 minutes. Check the level of the oil and add as necessary to fill it up. Probably wil take 1/2 or 1 quart. Warning: Do not overfill!

Aug 18, 2009 | Ford F-150 Cars & Trucks

2 Answers

Engine oil for a 2003 Chevy Malibu. Do I need synthetic oil?


no cheapest supermarket 20/50 is more than ample unless you intend to take on the best at LE MANS or the INDY 500

Jul 17, 2009 | Cars & Trucks

1 Answer

Need to replace oil pump assembly


Remove the Oil Pump
1.
Step 1

Drive your Dodge Caravan up onto ramps or lifts so you have room to work as you pull out the oil pump. You could also use a jack, but make sure you brace the front wheels and engage the parking break so the car doesn't roll.
2.
Step 2

Disconnect the negative battery cable on your Dodge Caravan. Drain the engine oil and coolant into separate pans. Take the vehicle off the ramps or lifts. Remove the accessory drive belts and use an engine support tool to hold the weight of the engine.
3.
Step 3

Take out the right engine mount and bracket. Take off the timing belt cover and loosen the bolts on the timing belt tensioner. Remove both the tensioner and the timing belt then raise the vehicle back on the ramps or lifts.
4.
Step 4

Take out the oil pan assembly and remove the oil pump pick-up and the O-ring. Take the crankshaft damper out with a good puller. Use a puller to also draw the crankshaft sprocket from the front of the crankshaft.
5.
Step 5

Loosen the bolts on the oil pump and take them off. Remember where they were since you'll need to replace them later. Unscrew the relief valve.
Install the New Oil Pump
6.
Step 1

Clean all the parts to remove contaminants and debris then install the inner rotor. Make sure the chamfer faces the cast iron oil pump cover on the back. Torque the bolts to 105 in. lb.
7.
Step 2

Install the relief valve, followed by the spring, gasket and cover cap. The cover cap should be tightened to 40 ft. lb.
8.
Step 3

Fill the rotor cavity with clean engine oil to prime it then insert a new O-ring seal into the oil pump. Put Mopar Gasket Maker or equivalent anaerobic type gasket sealer on the flange of the oil pump body.
9.
Step 4

Align the oil pump rotor flats with the flats on the crankshaft and install the pump slowly, tightening the fasteners to 20 ft. lb. Add the new front oil seal and install it with the spring side facing the inside of the engine. Even it out with the engine cover.
10.
Step 5

Install the crankshaft sprocket with the special sprocket tool. Put on the oil pump pick-up tube and O-ring and torque the bolt to 20 ft. lb.
11.
Step 6

Insert the oil pan and install a new oil filter. Lower your vehicle then install the timing belt and covers and crankshaft damper with a tool specialized for the 2 mm by 1.75 by 150 mm bolt. Tighten the center bolt to 105 ft. lb.
12.
Step 7

Put on the accessory drive belts and adjust them to the right tension. Put on the engine mount and bracket then take out the engine support tool.
13.
Step 8

Add fresh oil to the engine and refill the cooling system. Use a 50/50 mixture of clean, ethylene glycol antifreeze and water in the cooling system. Start your engine and check for leaks.

May 21, 2009 | 2000 Dodge Caravan

1 Answer

7mge have oil leak


hi if your engine 22R front engine first in side timing cover where engine bully fitted there is oil seal, next valve cover front side between cover and head there seal not like oil seal half cercle shap it makes leak also front side of the camshaft there is oil seal..

Sep 12, 2008 | 1989 Toyota Cressida

Not finding what you are looking for?
2005 Chevrolet Uplander Logo

144 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

76132 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8273 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...