Question about 2005 Dodge Durango
There are no tps in the wheels and the indicator light is not listed in the owners manual. Since the light came on the tires have all been replaced and pressures set the same. How do i turn off the light?
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
With the factory air pressure monitoring system of the dodge vehicles the light should automatically reset when the tire is reinflated to the proper pressure. If the light remains on after adjusting the air pressure then the problem lies at one of the individual sensors located at the valve stems on the rims
Posted on Mar 08, 2010
Shouldn't really be necessary to do anything to reset it if the system is operating properly.
"The system will automatically update and the TPM warning lamp will extinguish once the updated tire pressures have been received. The vehicle may need to be driven for up to 10 minutes above 15 mph (25 km/h) to receive this information."
"A system fault can occur by any of the following scenarios:
1) Jamming due to electronic devices or driving next to facilities emitting the same Radio Frequencies as the TPM sensors.
2) Installing some form of aftermarket window tinting that affects radio wave signals.
3) Lots of snow or ice around the wheels or wheel housings.
4) Using tire chains on the vehicle.
5) Using wheels/tires not equipped with TPM sensors."
Also, if you have the premium TPM system, the spare tire being low could trigger it, or with either the base or premium system, if you have a flat and change to a spare, the original flat tire could keep it from re-setting. And of course, a faulty sensor could be the problem.
There is a re-setting tool, but that should only be needed if the tire positions are changed (like if you rotate your tires), and that's only so that it can accurately tell you which tire is low, as opposed to turning off a warning light.
Good luck and thank you for using Fixya.
Posted on Mar 08, 2010
Tips for a great answer:
Aug 26, 2014 | Cars & Trucks
Sep 05, 2011 | Chevrolet Monte Carlo Cars & Trucks
Dec 22, 2010 | 2004 Ford Freestar
Dec 08, 2010 | Lexus ES 350 Cars & Trucks
Nov 20, 2010 | 2006 BMW 3 Series
Dec 21, 2009 | 2008 Chevrolet Cobalt
Oct 26, 2009 | 2004 Chevrolet Monte Carlo
Oct 05, 2009 | 2008 Hyundai Elantra
Sep 10, 2009 | 2004 Jeep Liberty
Sep 02, 2009 | 2008 Toyota Avalon
150 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: