Question about Jeep Liberty

Open Question

Low beams headlights don't work on 2005 jeep liberty limited

Posted by Anonymous on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
  • 1 Answer

SOURCE: Jeep Headlights not working. High beam works

had the same problem on my 92....check under the hood on the drivers side,towards the front,there is a "junction box" with all of the lighting wires connecting from the switches to the lights.My wires were all corroded inside,so I cleaned the ends and bought a new box from the local electronic supply store.The problem has not come back.

Cheers

Posted on Jul 15, 2009

Ad
  • 1986 Answers

SOURCE: Both low beam headlights stopped working at the

Could be the relay for the lowbeams is faulty, if your DRL's are your lowbeams, then your DRL Unit could be bad. Also did you blow a fuse cuz a random surge could blow the fuse

Posted on Aug 12, 2009

  • 1 Answer

SOURCE: 1996 jeep cherokee sport headlight low beams wont

try taking your tilt steering(steeringwheel) and check which setting its on if the tilt steering is all the way down click it up to the next setting and then try your low beams if that still doesn't work try it one more click up you might have a short or pinched wire in your wheel colum

Posted on Sep 02, 2009

philschneide
  • 448 Answers

SOURCE: Both my low beam headlights stopped working on the

I don't know if it will be very helpful (maybe not if both low beams went at the same time), but the fuses for your low beams are in your under hood fuse box: fuse number 1 (10A) left headlight low, and fuse number 6 (10A) right headlight low. Maybe it's not likely that they would both go at once, but I would check them.
Then, of course, it could be the bulbs.
Last, if not one of the former, then it becomes a matter of having relays and switches checked (not something you really want to do yourself).
Hope this is helpful.

Posted on Nov 16, 2009

wracefans24
  • 1985 Answers

SOURCE: 1998 Jeep Cherokee replaced headlight switch, now they don't work

you need to replace the multifunction switch also

Posted on Jan 21, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

CHANGED HEADLIGHT ASSEMBLY ON 2002 JEEP LIBERTY ONLY HIGH BEAM LIGHT COME ON


Try flicking the mulit-function switch high beam on and off. There has been known problems with this switch, but mostly the first place to start is with some new light bulbs.
Or possibly your low beam filaments are burnt out. You have to replace the bulbs. Each bulb has a lowbeam and a high beam filament.

Apr 10, 2013 | Jeep Liberty Cars & Trucks

2 Answers

Replaced battery in crv and now headlights don't work


Check the low beam fuse in the fuse box, usually a 20A. If the fuse is blown/shorted during the replacement of the battery, your lights won't work. Replace the fuse if that's your case. Hope this helps.

More help: Moonlight Driving
replaced-battery-in-crv-now-headlights-zp00lepaloflvda1hbduq5xd-4-9.jpg

Dec 29, 2012 | 2006 Honda CR-V

1 Answer

Where is the fuel pump relay on a 2008 jeep Liberty


Left side dashboard facing the door. Remove the oblong panel.

The fuse panel diagram is in your owners manual, if you don't have one, go to Jeep.com and download it for free.

Fuse Panel Description
Cavity Fuse Description
  • 1 15 Amp Blue Horn Relay, Power Sunroof Relay, Power Window Relay
  • 2 10 Amp Red Rear Fog Lights (Export Only)
  • 3 20 Amp Yellow Cigar Lighter
  • 4 10 Amp Red Headlight Low Beam Right
  • 5 10 Amp Red Headlight Low Beam Left
  • 6 20 Amp Yellow Body Control Module/Power Door Locks
  • 7 10 Amp Red Left Park Light/Left Tail Lamp/License Plate Lamp
  • 8 Spare
  • 9 10 Amp Red Right Park Light/RightTail Lamp/License Plate Lamp/ Cluster
  • 10 Spare
  • 11 15 Amp Blue Flasher
  • 12 15 Amp Blue Stop Lights
  • 13 10 Amp Red Body Control Module/ CMTC/Cluster/Pass. Airbag On,Off Indicator, Auto Daylight Mirror/Light Bar Switch (Renegade Only)
  • 14 10 Amp Red PDC Fuel Pump/AC Clutch, Starter Relay/Engine Controller/Transmission Controller (Diesel Only)
  • 15 Spare
  • 16 20 Amp Yellow Power Outlet (Rear)
  • 17 15 Amp Blue Rear Wiper



Sep 02, 2012 | 2008 Jeep Liberty

1 Answer

2005 Dodge Magnum low beams do not work


Obviously you have a connector which has come partially apart somewhere between the Headlights and the Headlight Switch. Most modern vehicles have several connectors between the Headlight Switch and the Headlights, Start at the Firewall Connector and work forward toward the Headlights making sure all connectors are securely mated. Another remote possibility is that you have fractured the "Low Beam Filaments" in BOTH Headlights. You don't mention how hard you hit the Speed Bump but if it caused the car to "Bottom Out" the front suspension it was a hard enough impact to fracture the filaments. You can use a 12 Volt Test Light at the Sockets for the Headlight Bulbs and see if you are getting 12 Volt power there. If you are in Low Beam position you have fractured the filaments. Check with High Beam too.

Nov 18, 2011 | 2005 Dodge Magnum

1 Answer

Have a 2005 Buick Rainier no low beam light


If it has a headlight relay,it is probably bad(There's a possibility of a bad ground which is common to both headlights). If not that,it must be the multi-switch that has the turn-signal/headlight/dimming control on it.don-ohio (:^)

Nov 17, 2011 | 2005 Buick Rainier

2 Answers

My driver side headlight stopped working, the bright works but not the dim. tried multiple bulbs. drive a 2007 jeep compass limited.


Most newer cars have a seperate fuse for each headlight low and high beam. check the fuses should be in the under hood fuseblock.

Oct 11, 2011 | 2007 Jeep Compass Limited

1 Answer

A pulled fuse panel for a 2003 Jeep Liberty, there are 39 fuses inside a vehicle. I need to know what these fuses are and what they go to.


The fuse box diagram is a sticker placed on the inside of the fuse box cover. This cover is located on the left end of the instrument panel (driver side). The sticker just uses numbers to indicate the fuses. I will match the fuse number with its purpose:
1. Power Outlet, Front
2. Rear Fog Lights
3. Horns
4. Headlight, Low Beam, Right
5. Headlight, Low Beam, Left
6. Body Control Module / Power Door Locks
7. Spare
8. Spare
9. Right Park Light / Right Tail Light / Trailer Tow Lights / Cluster
10. Spare
11. Flasher
12. Stop Lights
13. Body Control Module / CMTC / Cluster
14. Spare
15. PDC Fuel Pump and Auto Shut Down Relays / SKIS
16. Power Outlet Rear
17. Rear Wiper
18. Radio Choke

Jun 19, 2010 | 2003 Jeep Liberty

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

216 people viewed this question

Ask a Question

Usually answered in minutes!

Top Jeep Experts

yadayada
yadayada

Level 3 Expert

76649 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Kevin Daniels

Level 3 Expert

1455 Answers

Are you a Jeep Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...