Question about 2008 Dodge Grand Caravan

1 Answer

How to reprogram keyless remote for a 2008 dodge grand caravan?

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Dodge Master
  • 2,101 Answers

Here is what to do.

  • Enter your carhow to reprogram keyless remote for a 2008 dodge g - icon1.png and press the Lock button on your remote five times in 10 seconds.
  • 2Insert your key into the ignitionicon1.png and turn it to the "Run" position. Wait for the car's chimes to stop before proceeding.
  • Sponsored Links
  • 3Press and hold the Unlock button on your remote for four seconds and then hold the Panic button. Hold the two buttons together for one second and then release both and wait for the car to chime again.
  • 4Press and release the Lock and Unlock buttons together, then press and release just the Unlock button.
  • 5Wait for two chimes to sound. Turn the ignition to the "Off" position to end the programming sequence.
  • Posted on Dec 19, 2012

    Ad

    6 Suggested Answers

    6ya6ya
    • 2 Answers

    SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

    Hi,
    a 6ya expert can help you resolve that issue over the phone in a minute or two.
    best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
    the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
    click here to download the app (for users in the US for now) and get all the help you need.
    goodluck!

    Posted on Jan 02, 2017

    Ad
    • 85 Answers

    SOURCE: remote keyless entry

    “CUSTOMER LEARN” MODE This feature is only available on domestic vehicles or those which have a U.S. country code designator. This procedure requires access to at least two valid Sentry Keys. If two valid Sentry Keys are not available, Sentry Key programming will require the use of a scan tool.
    The steps required to program Sentry Keys with two valid Sentry Keys follows:
    1. Obtain the blank Sentry Key(s) that need to be programmed. Cut the keys to match the ignition lock cylinder mechanical key codes. 2. Insert one of the two valid Sentry Keys into the ignition switch and turn the ignition switch to the ON position. 3. After the ignition switch has been in the ON position for longer than three seconds, but no more than fifteen seconds, cycle the ignition switch back to the OFF position. Replace the first valid Sentry Key in the ignition lock cylinder with the second valid Sentry Key and turn the ignition switch back to the ON position. The second valid Sentry Key must be inserted within 15 seconds of removing the first valid Sentry key. 4. About ten seconds after the completion of Step #3 , the indicator light will start to flash and a single audible chime tone will sound to indicate that the system has entered the "Customer Learn" programming mode. 5. Within sixty seconds of entering the "Customer Learn" programming mode, turn the ignition switch to the OFF position, replace the valid Sentry Key with a blank Sentry Key transponder, and turn the ignition switch back to the ON position. 6. About ten seconds after the completion of Step #5 , a single audible chime tone will sound and the indicator light will stop flashing and stay on solid for three seconds and then turn off to indicate that the blank Sentry Key has been successfully programmed. The SKREES will immediately exit the "Customer Learn" programming mode and the vehicle may be started using the newly programmed Sentry Key.

    NOTE: The Remote Keyless Entry (RKE) Transmitter will also be programmed during this procedure. These steps must be completed in their entirety for each additional Sentry Key to be programmed. If any of the above steps are not completed in the given sequence, or within the allotted time, the SKREES will exit the "Customer Learn" programming mode and the programming will be unsuccessful. The SKREES will also automatically exit the "Customer Learn" programming mode if:

    1. It sees a non-blank Sentry Key when it should see a blank.
    2. If it has already programmed four (4) valid Sentry Keys.
    3. If the ignition switch is turned to the OFF position for more than about fifty (50) seconds.

    NOTE: If you attempt to start the vehicle while in “Customer Learn” mode (LED flashing), the vehicle will behave as though an invalid key is being used (i.e. the engine will stall after two (2) seconds of running). No faults will be logged.
    NOTE: Once a Sentry Key has been programmed to a particular vehicle, it cannot be used on any other vehicle.

    Posted on Aug 05, 2008

    • 1 Answer

    SOURCE: how do i program a new keyless entry remote to work on my 98 dodge caravan

    1999 dodge durango keyless entry dont work . i replaced the baturys still dont work . is thair a way to reprogram it with out a nother remote

    Posted on Oct 24, 2009

    • 3 Answers

    SOURCE: 2008 Grand Caravan won't start. The lock/unlock

    I am having this same issue with my 2008 Dodge Grand Caravan , I had it towed to the local Dodge Dealership. They just told me that it is the Wireless Control Module and it is going to cost $461.00 to replace it.

    Posted on Apr 12, 2010

    ZJLimited
    • 17970 Answers

    SOURCE: Keyless remote stopped working, I replaced battery

    The 1997 to 2003 Dodge Caravan and Grand Caravan use a standard key and remote setup with a separate remote fob. However, the 2004 to 2009 Dodge Caravan and Grand Caravan use a combination key and remote on one device. To program a new keyless entry remote for the 1997 to 2003 Dodge Caravan, you must have at least one functional remote, which is required to enter synchronization mode. To program the combination key for the 2004 to 2009 Dodge Caravan, you must have two functional combination keys. If you do not, you'll need to see an authorized Dodge dealer for keyless entry programming assistance.


    2004 to 2009 Caravan Programming Instructions

    1. Insert one of your working combination keys into the ignition. Turn it to "On"; leave it in this position for about 10 seconds but no longer than 15 seconds. Turn it to "Off" and remove it.
    2. Insert your second working combination key into the ignition within 15 seconds of removing the previous key. Turn it to "On". After 10 seconds, you'll hear a chime and the "Theft" light will begin to flash, entering synchronization mode. Turn the key to "Off" and remove it.
    3. Insert the combination key you want to program. Turn it to "On." After 10 seconds, you'll hear a chime; then the "Theft" light will turn off. When the light turns off, the combination key--including the key and the remote--is programmed.
    4. Repeat Step Three for each combination key you want to program. A total of eight can be programmed.
    Hope this help (remember comment and rated).


    Posted on May 08, 2010

    egstriker23
    • 44 Answers

    SOURCE: How do you reset the

    -Turn the key to the run position (where all the dash lights come on)
    -Immediately push the accelerator pedal to the floor 3 times, taking about 1 second for each push
    -The pedal has to go all the way to the floor and all the way back up.
    -After the third pump, turn the key to the off position

    It may take a couple of tries to get it right. It's basically a rhythm: key on...push...push...push... key off.

    Hope this helps!

    Posted on Oct 13, 2010

    Add Your Answer

    Uploading: 0%

    my-video-file.mp4

    Complete. Click "Add" to insert your video. Add

    ×

    Loading...
    Loading...

    Related Questions:

    1 Answer

    Como reiniciar motor con bad key?


    PDF]Download 2014 Dodge Grand Caravan Owner's Manual

    www.dodge.com/download/pdf/.../2014-Grand_Caravan-OM-2nd.p... DodgeIt also contains the Remote Keyless Entry (RKE) transmitter and an emergency key, which stores in the rear of the Key Fob. The emergency key allows for entry

    Aug 05, 2015 | 2008 Dodge Grand Caravan

    1 Answer

    I locked my vehicle (2008 Dodge Grand Caravan), with the remote keyless entry fob. The keyless entry will not unlock the doors, even after I replaced the battery. Unfortunately the emergency key that is...


    It sounds like your FOB needs to be reprogrammed, email me at bigt_wlm@juno.com around thursday and I will try to email you the programming instructions for that, If I am not able to you will need to call a locksmith with a T-Code or MVP Pro key programmer or DODge to programm your remote to your ECU

    Oct 31, 2010 | Dodge Grand Caravan Cars & Trucks

    1 Answer

    Keyless remote stopped working, I replaced battery


    The 1997 to 2003 Dodge Caravan and Grand Caravan use a standard key and remote setup with a separate remote fob. However, the 2004 to 2009 Dodge Caravan and Grand Caravan use a combination key and remote on one device. To program a new keyless entry remote for the 1997 to 2003 Dodge Caravan, you must have at least one functional remote, which is required to enter synchronization mode. To program the combination key for the 2004 to 2009 Dodge Caravan, you must have two functional combination keys. If you do not, you'll need to see an authorized Dodge dealer for keyless entry programming assistance.


    2004 to 2009 Caravan Programming Instructions
    1. Insert one of your working combination keys into the ignition. Turn it to "On"; leave it in this position for about 10 seconds but no longer than 15 seconds. Turn it to "Off" and remove it.
    2. Insert your second working combination key into the ignition within 15 seconds of removing the previous key. Turn it to "On". After 10 seconds, you'll hear a chime and the "Theft" light will begin to flash, entering synchronization mode. Turn the key to "Off" and remove it.
    3. Insert the combination key you want to program. Turn it to "On." After 10 seconds, you'll hear a chime; then the "Theft" light will turn off. When the light turns off, the combination key--including the key and the remote--is programmed.
    4. Repeat Step Three for each combination key you want to program. A total of eight can be programmed.
    Hope this help (remember comment and rated).


    May 08, 2010 | 2008 Dodge Grand Caravan

    1 Answer

    What brand remote car starter?


    Prostart models work great with Dodge makes, they are made by Directed Electronics and are available at Canadian Tire, you will also require a bypass moduel PKUMUX

    Apr 11, 2010 | 2008 Dodge Grand Caravan

    1 Answer

    Having the same problem with 2008 dodge grand caravan. Car is not starting most of the time and giving a error message stating bad key. Dont have a second to to try. Not sure what to do? Plz help


    If you boot for a few seconds and shuts down and gives you bad key problem could be the immobilizer which has the function to recognize the key and connect the engine computer which can be resolved by reprogramming the key. Thanks

    Mar 02, 2010 | 2008 Dodge Grand Caravan

    1 Answer

    Remote keys to unlock vehicle don't work


    If you have replaced the battery in the remote then the remot mite need reprogramming.

    Jun 27, 2009 | 2008 Dodge Grand Caravan

    1 Answer

    2002 dodge grand caravan panic alarm


    if its the remote then it needs to be swapped out. it could be the alarm module if the remote is not the thing that malfunctioning. i would get the alarm reprogrammed by the dealer and the whole module and go from there.
    so in order, 1. reprogram whole system 2.replace remote 3.replace module

    Jun 09, 2009 | 2002 Dodge Grand Caravan

    1 Answer

    How do i program a new keyless entry remote to work on my 98 dodge caravan


    1999 dodge durango keyless entry dont work . i replaced the baturys still dont work . is thair a way to reprogram it with out a nother remote

    Apr 29, 2009 | Dodge Caravan Cars & Trucks

    1 Answer

    New key?


    The dealership can use the vin number to make you another key. You shouldn't have to have the keyless remote key. You can get a regular key.

    Jan 22, 2009 | 2007 Dodge Grand Caravan SXT Minivan

    Not finding what you are looking for?
    2008 Dodge Grand Caravan Logo

    606 people viewed this question

    Ask a Question

    Usually answered in minutes!

    Top Dodge Experts

    yadayada
    yadayada

    Level 3 Expert

    76051 Answers

    Colin Stickland
    Colin Stickland

    Level 3 Expert

    22156 Answers

    Jeff Turcotte
    Jeff Turcotte

    Level 3 Expert

    8265 Answers

    Are you a Dodge Expert? Answer questions, earn points and help others

    Answer questions

    Manuals & User Guides

    Loading...