Question about 2011 Lincoln MKX

1 Answer

Clunking noise when braking

Loud nosie when car shifts from braking to gas

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Lincoln Master
  • 5,474 Answers

You are lucky you are driving a Lincoln. They historically have longer Warranty periods for free repairs.

This can be one of a number of things. The mounts for the undercarraige to the body may be loose. The motor mounts can be bad, the Trans can be worn. The Torque Converter lock-up can be worn. Brake calipers could be sticking.

Sometimes the Torque converter engagements are electronically controlled and adjustable through a computer hookup.

Some parts are Warrantied longer if they are covered by pollution regulations, but the Lincoln product had longer Warranties than the cheaper products so investigate with a Lincoln Dealer. There may be Service bulletins for a common defect that is a free fix.

I hope my solution was helpful, please rate my info.

Posted on Dec 01, 2012

2 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 105 Answers

SOURCE: loud clunking noise when i turn a corner both sides rear

check the sway bar kinks for play both rear wheels will have to even ramps work good if you have them if the is any play in the links it wil rattle also check for play in the bushings that the bar goes threw tis will also give you the noise you complain of

Posted on May 28, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Loud grinding/clunking noise when driving, lessens when I press the brake


Loud Noise Unknown Origin - Ask the GM Technician - GM-Trucks.com

www.gm-trucks.com > ... > Ask the GM Technician

Jun 30, 2006 - 7 posts - ‎3 authors
I get a loud clunking, grinding noise while turning to the right only, and ... I moved the passenger side tire to the rear driver side just in case it ...

can bad wheel bearing/hub cause loud clunking noises?

www.jeepsunlimited.com/.../showthread.php?...loud-clunking-noises

Nov 12, 2009 - 14 posts - ‎6 authors
driving home, i noticed some metal clunking sounds coming from the front driversside. at ... hmmmm....if it's grinding, then probably a bearing.

Front Clunking sound when driving straight. - TDIClub Forums

forums.tdiclub.com > ... > VW MKIII-A3/B4 TDIs
Dec 21, 2011 - I have a sporadic clunking noise from the drivers side front end. '98 jetta ... If I try to coast it gets really louder and more pronounced. ... whirring orgrinding could be several things: wheel bearing, brake pads due to a caliper ...

Quick Guide to Diagnosing Differential & Driveline Noises ...


Dec 26, 2015 | Cars & Trucks

1 Answer

Dodge stratus 1992


I would check the rotor and brake pad for the driver side.

Jul 02, 2013 | Cars & Trucks

2 Answers

Hi. My left rear brake is making a very loud nosie when i stop. The same noise continues once i press the gas but only for a short second.


sounds like either your caliper is sticking or your wear indicator on your brake pads is making the sound.

Jun 20, 2010 | 2004 Toyota Highlander

1 Answer

Rear End Nosie


if it is a growling type noise that increases with speed it is a wheel bearing. can you tell which side it is coming from? if not sometimes when driving you can turn car and shift the vehicle weight the side making noise will quiet down some when the weight is shifted off it so if you turn to right and noise gets less it is rt side and so on

May 26, 2010 | 1999 Chevrolet Lumina

1 Answer

Brakes makin nosie


Sounds like a wheel hub assembly is bad without seeing it. Alot of GM vehicles have the ABS wheel speed sensors built into the hub assemblies. Should be able to narrow the noise down by driving the car slightly turn left and right noise should change from loud to soft when turning the wheel. ( if you turn left and noise gets louder hub on right front is noisey.Opposite will occur if left side is bad)

Jul 31, 2009 | 2002 Pontiac Aztek

1 Answer

Car drives and shifts, but theres a clunking noise


check the brake dust shield beind the rotor. That might be a good start. Not sure what you mean by clunking but also check your engine mounts bushing and sway bar bushing. Good luck

Apr 06, 2009 | 1998 Chevrolet Cavalier

1 Answer

2002 Chevy Silverado 4wd 2500HD noise


probaly dont have a problem your truck probaly has a gas engaged 4 wheel dr modual and what you hear is the gas modual engaging

Apr 03, 2009 | 2003 Chevrolet Silverado 2500HD

1 Answer

4X4 MAKES A LOUD CLUNKIN NOISE THEN WONT WORK AGAIN


if its manual shift,its internal damage,if its elect.shift could elect.shift motor and,or internal damage

Mar 12, 2009 | 1999 GMC Sierra

Not finding what you are looking for?
2011 Lincoln MKX Logo

211 people viewed this question

Ask a Question

Usually answered in minutes!

Top Lincoln Experts

yadayada
yadayada

Level 3 Expert

75077 Answers

fordexpert

Level 3 Expert

5471 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Are you a Lincoln Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...