Question about Chevrolet Silverado 1500
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
There is a vaccuum operated switch located on the transfer case that sends vaccum to the accuator that pulls a cable that locks the front end in. Check for vac coming in and out of this switch if no vac out replace it. This switch is a very common problem. You can find them at most parts stores in the help section #49315. please rate.
Posted on Dec 08, 2008
Reset the computer by disconnecting the battery. This should solve this. nutetral is for the four lo only to engage.
Posted on Feb 02, 2009
Replace the push button selector assembly. Common failures. If that isnt the problem then the encoder motor on transfer case has failed. Try switch first.
Posted on Mar 29, 2009
SOURCE: 4 Wheel Drive Problem
Put the key in the run position and turn your 4wd on and off to listen for the electronic acuator to engage and disengage. If your can hear it then it's macanical and a Quick fix. On top of the transfercase on the driver's side, your going to find three vacuume tube connected to a cauume switch that may have gone bad. There common to go bad and there not the bad of a price at the Auto Zone. Check for any cracks on the vacuume line first then get your hands dirty. Good luck and keep an extra switch in your glove box.
Posted on Apr 08, 2009
You say 'new' truck, 09? or new used? I have had 3 Fords, 3 w/ manual trans. case, if you go into 4x4 Low range, you must come to a complete stop before shifting the trans. case to 4x4 mode, and I always put trans (automatic) in neutral before slipping into 4x4, it engages smoothly, no grinding. 4x4 high range can be put in while moving, but I would let off the gas pedal, shift to 4x4 high range, then resume accelerating. If there is any grinding going on doing it as above, something isn't right. Check the trans. case fluid level also, to make sure that's not an issue.
Posted on Aug 15, 2009
Tips for a great answer:
Feb 21, 2015 | 2004 Chevrolet Silverado 2500HD
Jan 20, 2012 | Chevrolet Silverado 1500 Cars & Trucks
Dec 18, 2010 | 1993 Chevrolet K2500
Nov 29, 2010 | 1997 Chevrolet C/K 2500
Sep 07, 2010 | 2000 Chevrolet Silverado 2500
Feb 10, 2010 | 2002 Chevrolet Silverado 2500HD
Oct 29, 2009 | 1998 Chevrolet Blazer
Aug 15, 2009 | 1998 Dodge Ram 1500 4WD
Mar 29, 2009 | 1998 Chevrolet K1500
Jan 26, 2009 | 1997 Chevrolet Blazer
Aug 24, 2017 | Chevrolet Cars & Trucks
186 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: