Question about Cars & Trucks

Open Question

How clutch cylinder is set up on volvo b10m coach

Posted by on


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

I have a 2006 volvo 2.0 d we recently replaced cutch kit but the clutch is sticky and its losing fluid

If the clutch is engaging while you are pressing the pedal and you are losing fluid either the clutch master cylinder or the clutch slave cylinder is bad. If the fluid is leaking from the firewall on the drivers side its the clutch master cylinder. If the fluid is leaking from the transmission area its the slave cylinder.

Sep 14, 2016 | 2006 Volvo S40

1 Answer

My volvo s40 2.0D 2005 clutch is not coming back fully after being depressed. I tried to bleed the hydraulic system but no nothing works?

possibly a blockage in the compensating port in the master cylinder
Take it to an accredited brake specialist shop for a proper diagnosis and quote
the problem will be in the hydraulics and not in the clutch plate area

Apr 08, 2016 | Volvo Cars & Trucks

1 Answer

Hi i have ust got into my Volvo v50 and my clutch pedle is on the floor it was fine on satuarday

Could be slave cylinder. Look under car where it was last parked for fresh fluid on ground. Also look under hood for resivor. Should be 2 looking a lot alike. One for brakes and other for clutch. Owners manual will show them.

Dec 15, 2014 | 2004 Volvo V50

1 Answer

Starting problems

having to press the clutch to start is a safety factor common to a lot of clutch operated vehicles. If they cleaned the switch contacts then look for a pressure switch in the hydraulic system (probably on the clutch master cylinder or in the steel line to the slave cylinder) and replace it . To clean it if you can get it apart use a 400 grade emery paper and electrical contact spray cleaner but as contact points are silver coated any cleaning accelerates the contact point failure.

Feb 01, 2014 | Volvo S60 Cars & Trucks

1 Answer

Volvo b10m

Hi Eric, What smoke problem? Cigarettes, pipe, house on fire? We need info to help you! Regards John

Jul 20, 2013 | Cars & Trucks

1 Answer

Clutch kit

If a newly installed hydraulic kit leaks after 6 months you need to renew the complete master cylinder or slave cylinder unit.
The leaks are occuring because of wear/corrosion in the metal cylinder.

A brand new unit will operate for many years without further trouble.

Jun 15, 2009 | 1989 Volvo 240

1 Answer

Location of brake/clutch bleed valve nipple

AHH look for it by the slave cylinder it might have a black rubber cap on it to keep dust out it will look simliar to the bleeder valve on the brake system

May 08, 2009 | 2005 Volvo S60

1 Answer

No clutch

You have a clutch cable on that model!

Jan 03, 2009 | 1991 Volvo 240

1 Answer

Oil on the floor,driver side?

If the car is a manual its likely to be clutch fluid from the master cylinder.

Cheers John

Dec 16, 2008 | 1998 Volvo S70

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

170 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts


Level 3 Expert

79865 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22326 Answers

john h

Level 3 Expert

14479 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides