93 buick adjusted door handle now won't open in or outside
I adjusted door handle on 1993 buick regal ( had done before with no problem) It worked twice then it shut and won't open from the inside or out. I just need to open the door so that I can fix handle, and get in and out.
Re: 93 buick adjusted door handle now won't open in or...
Let down the window, take a chain with a hook on it ,hook it on to the
handle and if your strong enough pull the chain hard and hold it from the inside and once again if your strong enough turn around and give it a bruce lee with boots on. be careful to put a few towels between the chain and the finish you don't want to wear the solutionafterward.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Well, the mirrors would be on the circuit with the courtesy lights. The door locks and windows would be on different circuits. Why can't you unlock the driver's or passenger door with the key and open it with the door handle ?
I have this problem every year with my car, 1993 buick regal custom, 3.8. What happens is it gets cold, warms up a bit, and ice or snow melts and gets in the door, then it gets cold again and it freezes. I go to unlock and open the door from the outside and this problem arises.
There is a vertical rod on the left side of the drivers side, right side of the passenger side, that gets bent, from trying to open the door when that mechanism is frozen up. Just bend it back, a TINY bit and it will start working.
I got tired of taking my door apart every time it happened so i cut a little "door" in the cover thing, so i can get at that bar.
I also tried coating it in grease and that seems to lessen the frequency.
R/F door trim will have to be removed. Most likely you will find linkage disconnected from the inside latch of the outside door handle. You might even find a broken piece of the door handle requiring replacement
If it will not open from the outside it could be that the clip came of of the handel inside of the door panel.turn signal could be that the bulb is bad even if it lights up if it doese not flash it is a bad bulb