Question about 2006 Nissan Sentra 1.8
Probably a simple fix, it could just be a matter of taking off a cover thats on the outside above the lisence plate, then replacing the bulb. if not, then you might have to take off the cover thats on the inside of the trunk (probably a felt like material like a pool table) and find where it is, then replace it from there.
Posted on Dec 01, 2012
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
I assume you are talking about the outter tie rod.
Jack up and support the car and remove the wheel.
Then you see the tie rod. Their is a lock nut agenst the tie rod. Break this nut loose. It is normally a 17-21mm nut.
Now remove the cotter pin (if applied)and break loose the castle nut.
Now use a ball joint splitter or a tie rod splitter and pop the tie rod out of the knuckle.
DO NOT HIT THE KNUCKLE WITH A HAMMER. If memory serves me this car has a aluminum knuckle and if you can damnage it if you hit it with a hammer.
Now just spin the tie rod off and install the new one.
Take it to your local shop to have the alighnment done.
Posted on Dec 10, 2008
the license plate because of its position gets a lot of dirt and water problems so i would go back and take another good look remove the bulbs again and see if you can clean the inside with a little sand paper or a little scrape with a small screwdriver then spray with a little sileacone oil replace bulbs.Then switch lights on they should be ok if not try moveing them slightly with your fingers they should light.please let me know how you get on.adrian
Posted on Feb 18, 2009
1. Open the hatch and stand under it.
2. Remove pull handle from the inside of the hatch (2 screws under pop panels).
3. Starting in the lower corners, gently pry the entire interior panel from the hatch,
and leave it hanging from the wiper area near the glass.
4. Grasp the bulb housing and twist to the left while pressing inward.
5. Replace with a 1156 bulb.
Posted on Nov 01, 2009
Tips for a great answer:
Apr 25, 2014 | 2006 Nissan Sentra
Mar 21, 2014 | 2004 Nissan Sentra
Mar 08, 2013 | 2007 Nissan Sentra 2.0 SL Sedan
May 29, 2012 | Nissan Cars & Trucks
Jul 10, 2011 | 2008 Nissan Sentra
Jul 05, 2010 | 2006 Nissan Xterra
Apr 04, 2010 | 2006 Nissan Xterra
Mar 14, 2010 | 2008 Nissan Sentra
Feb 18, 2009 | 2003 Nissan Sentra
254 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: