4ze1 rodeo vacuum line diagram - 1991 Isuzu Rodeo

which engine.????????
4 banger is 1,3,4,2 , on most, (non boxer engines)
the ECU dictates order, why worry that?
you plug the coils in wrong"?
try posted engine, size in car.

hummmm the list
2.3 L 4ZD1 I4
2.4 L C24SE I4 (GM, Aus)
2.4 L C24NE I4 (Euro)
2.6 L 4ZE1 I4
3.1 L LG6 V6 (GM)
3.2 L 6VD1/6VD1W V6
2.5 L 4JA1 diesel I4 (Cameo, TH)
2.8 L 4JB1-T turbo diesel I4
3.0 L 4JH1-T turbo diesel I4
3.1 L 4JG2 turbo diesel I4

if the scan tool dont show it bad, its not. but... no symptoms posted
lost all spark, and engine dont start but cranks ok.
alldata shows this. alldata.com,
$250+ part too.. try a real scan tool? yet?
3 wire sensor, HALL type.


the correct name for this engines is 2.6 L 4ZE1 I4

if you google that , you can learn 1000 things, and where the parts are.
The 2.6L 4ZE1 SOHC eight valve engine features 120 hp (89 kW) and was available as an option to replace the 4ZD1 on four-wheel-drive models.

like all CKPs it can only be in 3 places.
front crank end.
rear end (lots of ways, here, on fly, behind fly, on crank)
mid crank (rare)

but also depends on what country sold, , in the USA they
had to move it, for misfire detection !
so where are you, or better to what country was the car sold to, new.
called market.

on the early cars there were no CKP, on the CAS in the DIzzy base.
on our cars it will throw a P0340 to 355 error if bad or even drops 1 in 10 pulses.like clock work that fact
outside USA, code 41"s"

im googling 4ze1 for your.
and the 3rd hit i find


"1995-1997 Pickup, Trooper II, Amigo, Rodeo 2559cc, 2.6L, Engine Model 4ZE1. Crankshaft has a bolt-on sensor ring at the rear main journal."

now you know why its $250,


ever heard of rockauto.
http://www.rockauto.com/catalog/raframecatalog.php?carcode=1398900&parttype=5292


same story.

you mix the HV wires?. up.
you;d have to tell what engine you have, first.
In the USA? open hood, look up, see EPA sticker that tells what engine you have.
2.3 L 4ZD1 I4
2.4 L C24SE I4 (GM, Aus)
2.4 L C24NE I4 (Euro)
2.6 L 4ZE1 I4
3.1 L LG6 V6 (GM)
3.2 L 6VD1/6VD1W V6
2.5 L 4JA1 diesel I4 (Cameo, TH)
2.8 L 4JB1-T turbo diesel I4
3.0 L 4JH1-T turbo diesel I4
3.1 L 4JG2 turbo diesel I4

(2WD) L4-2559cc 2.6L SOHC (4ZE1) (1991) (2WD) V6-3165cc 3.2L SOHC (6VD1) (1993)
(4WD) V6-3165cc 3.2L SOHC (6VD1) (1993) (4WD) L4-2559cc 2.6L SOHC (4ZE1) (1991)
2WD V6-3.2L (2003) 4WD V6-3.2L (2004)
LS 2WD V6-3.2L (1999) LS 2WD V6-3165cc 3.2L SOHC (6VD1) (1997)
LS 4WD V6-3.2L (1998) LSE 2WD V6-3.2L (1999)
LSE 4WD V6-3.2L (2000) S 2WD L4-2.2L (1999)
S 2WD V6-3.2L (1998) S 2WD L4-2559cc 2.6L SOHC (4ZE1) (1997)
S 4WD V6-3.2L (1999) S 4WD V6-3165cc 3.2L SOHC (6VD1) (1997)
Sport 2WD V6-3.2L (2001) Sport 2WD L4-2.2L (2002)
Sport 4WD V6-3.2L (2002)

what country, welcome to the world wide web.
we dont know this like magic,
you must tell.
the FSM on your car is published by , drum roll........ country.
in the usa. we
: buy one used on fleabay./
or login to alldata.com
one of 2 common ways, (mitchells?)

Need a vacuum line diagram for a 2001 isuzu 3.5 engine.

1995 Isuzu Rodeo 3.2 liter SOHC V-6 (6VD1)




1995 Isuzu Rodeo 2.6 liter SOHC L4 (4ZE1)



Hope helps (remember rated and comment this).

i guess your talking about vacuum hoses, heres a vacuum hose diagram to help,hope this helps,this shows the evap system also, thats where most of the vac lines run too.

from memory it is in inlet manifold some were in front middle section bottom, (underneath) 4ZE1?
single wire possibly yellow

my fuse for the rear tail lights keeps blowing after 20 sec,