Question about 1992 GMC Sonoma

Open Question

MY 1992 GMC Sonoma has a rough Idle on a cold start and seams like the choke is sticking but it doesnt have a choke

Posted by Anonymous on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
jasonrwagner
  • 14 Answers

SOURCE: Spark plug gap on a 1992 Gmc Sonoma 4.3L V6 FI

Usually somewhere on the engine or in the engine compartment, there is a sticker with the engine specifications. The spark plug gap should be included. If not .032 or an inch should be close.
Good luck

Posted on Jun 26, 2008

Ad

SOURCE: rough idle on 1992 sonoma truck

i have a 92 sonoma as well and its suppose to be normal its due to an unbalanced camshaft

Posted on Oct 12, 2008

  • 188 Answers

SOURCE: Truck losing power and service engine soon light on

Like to other guy said, give it a tuneup. Also try SEAFOAM to clean carb up of slug. Also check to make sure the butter fly for the choke has not come loose, causing it the choke it down. Failed choke pull-off.

Posted on Feb 02, 2009

  • 38 Answers

SOURCE: 1992 gmc sonoma pick up egr system diagnostic procedures. help?!

To trouble shoot your rotten egg smell... have you checked your coolant level. Usaully when you smell a rotten egg smell from the exhaust it indicates that your engine is ingesting coolant. Possible causes are: blown head gasket, cracked waterjackets in one or more cylinders, intake manifold cracked or leaking manifold gasket at the heads. My buddy and I just got done changing out his intake manifold along with waterpump gasket, cooler line O-rings and oil pan gasket. He was finding that he was slowly loosing coolant, but nothing on the ground. I went to his exhaust and smelled it as it was running and it smelled like rotten eggs. That told me that he was ingesting his coolant. We checked around the intake manifold (plentum) gaskets and could see that things were looking damp. My friend did some checking around at the dealer and he found out tha GM has a lawsuit against DexCool (orange coolant) because their product was eating away the seals and mixing with the oil. My friend is driving a 2002 GMC Seirra (96,000 mi - 2nd owner) with the 5.7 liter (Aluminum heads). We pressure tested the coolant system and found that some of the coolant was coming out around the water pump seal as well. GM said that his truck wasn't on the list yet, but it could make the list soon so he's instructed to keep in touch. We also noticed the O-ring on the cooler line showed signs of failing because of the white crusty stain that tracked down the base of the head to the manifold. During all of this his truck seemed to be running fine. Before things got worse we decided to pull the Plastic (on his engine) intake manifold to look at the clip-on style gaskets. They looked bad. They are made of a type of silicone rubber and they looked like they were chemically melted or just like they were getting mishapen (kind of wavey looking in area's). We went to ADVANCED AUTOPARTS store (where we have received years of outstanding advise and quality parts) and queried the parts specialist who told us to also (because it's plastic and there have been known problems with the OEM intake manifold) check with a straight edge, the levelness of the mating surface on the intake manifold (gaskets removed of course). Numbers 2 & 4 intake ports had about a 0.040" gap under the straight edge. Even the silicone style gaskets when compressed can't bridge that gap effectively while under pressure. We searched the intake for cracks as well and found none, but to correct the intake problem we had to order a new intake from ADVANCED AUTOPARTS STORE and the new OEM standard replacement comes with a solution to the known problem and had thicker mating surfaces and the gaskets were embedded in the new design. while having the water pump off, and the intake manifold off we took the oportunity at and changed out his timing chain and gears along with his oilpan gasket that came with the FRAM water pump gasket kit. After making sure that his timing chain sprokets where aligned we put everything back together but opted to change out the AC Delco plugs for NGK Irridiums and OMG... Brother, there was no more leaks, no more throttle hesitation which is standard with OEM plugs and the truck set you back IN YOUR SEAT. The backend got started to float from left to right a rolling start of about 15mph to get out ahead of traffic that was just leaving the light and because of the recommendation of the reps at ADVANCED the truck runs like a Raped Ape. I litterally found myself searching for a break pedal on the passenger floor. LOL My buddy said that truck has NEVER run like that in the all the years that he has owned it. It always ran very clean and nice, but HOLY COW!!! He was grinning like the little school boy that just got his first kiss out on the school playground by cute little Lisa. Best of all... No more leaks and no more rotten egg smell.

You may not have all of these things going on with yours or maybe you do, but to address the smell I would look the engine over and pressure test the engine cooling system and if you're using the Orange coolant, GET RID OF IT before you spend approx $800.00 like my buddy. The coolant could also be causing your rough running engine. Coolant will choke up a cylinder causing your vehicle to run rough or irratic. We did the work in 2 days taking our time and making it right and he hasn't been happier ever since.

V/R,
Ford Guy

Posted on Mar 14, 2009

  • 14036 Answers

SOURCE: 96 gmc vortec will not start

I AM LOOKING AT TIMING ISSUES OR INTAKE MANIFOLD LEAK.OR EGR VALVE STUCK OPEN.

Posted on Dec 30, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Will not idle when cold


Its cold start issues:----
Go through the list of help links mentioned below:----

Click the link :----

Cold start problem and vehicle shudder around 2500 to 3500 rpms
http://repairhelpcenter.blogspot.com/2012/10/cold-start-problem-and-vehicle-shudder.html
----------
Low idle when cold out side?
http://repairhelpcenter.blogspot.com/2011/12/low-idle-when-cold-out-side.html
--------------
Ford explorer 4.0 will not idle when cold?
http://technoanswers.blogspot.in/2012/02/ford-explorer-40-will-not-idle-when.html
--------
Automatic transmission shift lever hard to move on cold mornings?
http://technoanswers.blogspot.com/2012/01/automatic-transmission-shift-lever-hard.html
----------
Car won't start when cold?
http://schematicsdiagram.blogspot.com/2011/12/car-wont-start-when-cold.html
-----------

It can be issue with IAC( idle air control valve) causing the problem.


There are many other possibilities causing these idle issues. Engine idles rough.

There are few help links with solutions to troubleshoot such idle issues.

I suggest you refer the link below and follow its troubleshooting details:------

Click the link below:-----

Ford Expedition IAC valve replacing

http://technoanswers.blogspot.com/2012/12/ford-expedition-iac-valve-replacing.html

Bad miss at idle?

http://technoanswers.blogspot.com/2012/01/bad-miss-at-idle.html

-----------

Stumbling and stalling at idle after engine rebuild?

http://schematicsdiagram.blogspot.in/2012/03/stumbling-and-stalling-at-idle-after.html

------------

1999 Ford F-150 Idles rough and quits when gas pedal is pressed less?

http://technoanswers.blogspot.in/2012/01/1999-ford-f-150-idles-rough-and-quits.html

---------

Engine stumbles coming off idle when warm?

http://repairhelpcenter.blogspot.com/2012/01/engine-stumbles-coming-off-idle-when.html

------------------

Erratic idle on car?

http://schematicsdiagram.blogspot.com/2011/12/erratic-idle-on-car.html

-----------


Cold start problem and vehicle shudder around 2500 to 3500 rpms

http://repairhelpcenter.blogspot.com/2012/10/cold-start-problem-and-vehicle-shudder.html

----------

Low idle when cold out side?

http://repairhelpcenter.blogspot.com/2011/12/low-idle-when-cold-out-side.html

-----------

GMC Sonoma Stalls and idles low

http://technoanswers.blogspot.com/2012/10/gmc-sonoma-stalls-and-idles-low.html

--------


GMC Idle Air Control (IAC) Valve Replacing?

http://schematicsdiagram.blogspot.com/2011/12/gmc-idle-air-control-iac-valve.html

-------------

1996 Camry intermittent engine failure while idle?

http://repairhelpcenter.blogspot.com/2011/10/1996-camry-intermittent-engine-failure.html

------------

Engine quits at idle?

http://repairhelpcenter.blogspot.com/2011/10/engine-quits-at-idle.html

-----------

Car overheats and Air blows hot at idle?

http://howtobyme.blogspot.com/2011/11/car-overheats-and-air-blows-hot-at-idle.html

---------

High Idle Problem

http://repairhelpcenter.blogspot.com/2012/10/high-idle-problem.html

-------

While stop engine idles like cylinder missing?

http://schematicsdiagram.blogspot.com/2012/01/while-stop-engine-idles-like-cylinder.html

---------

Idle flair is noticed on car? Rough idle? car will not idle? Erratic idle speed?

http://technoanswers.blogspot.in/2012/02/idle-flair-is-noticed-on-car-rough-idle.html

--------

High rpm in neutral? Inconsistant high RPM in neutral?

http://technoanswers.blogspot.in/2012/02/high-rpm-in-neutral-inconsistant-high.html

-------

Vehicle stumbling at idle and shows code 54?

http://schematicsdiagram.blogspot.in/2012/03/vehicle-stumbling-at-idle-and-shows.html

----------

Rough idle, staling and Erratic shifting?

http://technoanswers.blogspot.in/2012/03/rough-idlestaling-and-erratic-shifting.html

-----------

While stop engine idles like cylinder missing?

http://schematicsdiagram.blogspot.com/2012/01/while-stop-engine-idles-like-cylinder.html

---------

These details will help.

Thanks.

Dec 14, 2012 | 1999 Jeep Wrangler

1 Answer

1999dodge intrepid 2.7 lite idle low


Car Stalls and idles low

http://technoanswers.blogspot.com/2012/10/gmc-sonoma-stalls-and-idles-low.html
------------


It can be issue with IAC( idle air control valve) causing the problem.


There are many other possibilities causing these idle issues. Engine idles rough.

There are few help links with solutions to troubleshoot such idle issues.

I suggest you refer the link below and follow its troubleshooting details:------

Click the link below:-----

Ford Expedition IAC valve replacing

http://technoanswers.blogspot.com/2012/12/ford-expedition-iac-valve-replacing.html

Bad miss at idle?

http://technoanswers.blogspot.com/2012/01/bad-miss-at-idle.html

-----------

Stumbling and stalling at idle after engine rebuild?

http://schematicsdiagram.blogspot.in/2012/03/stumbling-and-stalling-at-idle-after.html

------------

1999 Ford F-150 Idles rough and quits when gas pedal is pressed less?

http://technoanswers.blogspot.in/2012/01/1999-ford-f-150-idles-rough-and-quits.html

---------

Engine stumbles coming off idle when warm?

http://repairhelpcenter.blogspot.com/2012/01/engine-stumbles-coming-off-idle-when.html

------------------

Erratic idle on car?

http://schematicsdiagram.blogspot.com/2011/12/erratic-idle-on-car.html

-----------


Cold start problem and vehicle shudder around 2500 to 3500 rpms

http://repairhelpcenter.blogspot.com/2012/10/cold-start-problem-and-vehicle-shudder.html

----------

Low idle when cold out side?

http://repairhelpcenter.blogspot.com/2011/12/low-idle-when-cold-out-side.html

-----------

GMC Sonoma Stalls and idles low

http://technoanswers.blogspot.com/2012/10/gmc-sonoma-stalls-and-idles-low.html

--------


GMC Idle Air Control (IAC) Valve Replacing?

http://schematicsdiagram.blogspot.com/2011/12/gmc-idle-air-control-iac-valve.html

-------------

1996 Camry intermittent engine failure while idle?

http://repairhelpcenter.blogspot.com/2011/10/1996-camry-intermittent-engine-failure.html

------------

Engine quits at idle?

http://repairhelpcenter.blogspot.com/2011/10/engine-quits-at-idle.html

-----------

Car overheats and Air blows hot at idle?

http://howtobyme.blogspot.com/2011/11/car-overheats-and-air-blows-hot-at-idle.html

---------

High Idle Problem

http://repairhelpcenter.blogspot.com/2012/10/high-idle-problem.html

-------

While stop engine idles like cylinder missing?

http://schematicsdiagram.blogspot.com/2012/01/while-stop-engine-idles-like-cylinder.html

---------

Idle flair is noticed on car? Rough idle? car will not idle? Erratic idle speed?

http://technoanswers.blogspot.in/2012/02/idle-flair-is-noticed-on-car-rough-idle.html

--------

High rpm in neutral? Inconsistant high RPM in neutral?

http://technoanswers.blogspot.in/2012/02/high-rpm-in-neutral-inconsistant-high.html

-------

Vehicle stumbling at idle and shows code 54?

http://schematicsdiagram.blogspot.in/2012/03/vehicle-stumbling-at-idle-and-shows.html

----------

Rough idle, staling and Erratic shifting?

http://technoanswers.blogspot.in/2012/03/rough-idlestaling-and-erratic-shifting.html

-----------

While stop engine idles like cylinder missing?

http://schematicsdiagram.blogspot.com/2012/01/while-stop-engine-idles-like-cylinder.html

---------

These details will help.

Thanks.

Dec 12, 2012 | 1999 Dodge Intrepid

2 Answers

92 dodge 1500 pick up 360 v8 automatic Starts, runs but hesitates, low power code 37 on diagnostic readour


Code 37 is torque converter clutch solenoid failure. Transmission wont shift in and out of overdrive.

Nov 28, 2012 | Dodge Cars & Trucks

1 Answer

Ford Taurus idle missing


It can be issue with IAC( idle air control valve) causing the problem.


There are many other possibilities causing these idle issues.Engine idles rough.

There are few help links with solutions to troubleshoot such idle issues.

I suggest you refer the link below and follow its troubleshooting details:------

Click the link below:-----
Bad miss at idle? http://technoanswers.blogspot.com/2012/01/bad-miss-at-idle.html

-----------
Stumbling and stalling at idle after engine rebuild?

http://schematicsdiagram.blogspot.in/2012/03/stumbling-and-stalling-at-idle-after.html

------------
1999 Ford F-150 Idles rough and quits when gas pedal is pressed less?

http://technoanswers.blogspot.in/2012/01/1999-ford-f-150-idles-rough-and-quits.html

---------
Engine stumbles coming off idle when warm?

http://repairhelpcenter.blogspot.com/2012/01/engine-stumbles-coming-off-idle-when.html

------------------
Erratic idle on car?

http://schematicsdiagram.blogspot.com/2011/12/erratic-idle-on-car.html

-----------


Cold start problem and vehicle shudder around 2500 to 3500 rpms
http://repairhelpcenter.blogspot.com/2012/10/cold-start-problem-and-vehicle-shudder.html

----------
Low idle when cold out side?

http://repairhelpcenter.blogspot.com/2011/12/low-idle-when-cold-out-side.html

-----------
GMC Sonoma Stalls and idles low

http://technoanswers.blogspot.com/2012/10/gmc-sonoma-stalls-and-idles-low.html

--------


GMC Idle Air Control (IAC) Valve Replacing?

http://schematicsdiagram.blogspot.com/2011/12/gmc-idle-air-control-iac-valve.html

-------------
1996 Camry intermittent engine failure while idle?

http://repairhelpcenter.blogspot.com/2011/10/1996-camry-intermittent-engine-failure.html

------------
Engine quits at idle?

http://repairhelpcenter.blogspot.com/2011/10/engine-quits-at-idle.html

-----------
Car overheats and Air blows hot at idle?

http://howtobyme.blogspot.com/2011/11/car-overheats-and-air-blows-hot-at-idle.html

---------

High Idle Problem

http://repairhelpcenter.blogspot.com/2012/10/high-idle-problem.html

-------
While stop engine idles like cylinder missing?

http://schematicsdiagram.blogspot.com/2012/01/while-stop-engine-idles-like-cylinder.html

---------
Idle flair is noticed on car? Rough idle? car will not idle? Erratic idle speed?

http://technoanswers.blogspot.in/2012/02/idle-flair-is-noticed-on-car-rough-idle.html

--------
High rpm in neutral? Inconsistant high RPM in neutral?

http://technoanswers.blogspot.in/2012/02/high-rpm-in-neutral-inconsistant-high.html

-------
Vehicle stumbling at idle and shows code 54?

http://schematicsdiagram.blogspot.in/2012/03/vehicle-stumbling-at-idle-and-shows.html

----------
Rough idle, staling and Erratic shifting?

http://technoanswers.blogspot.in/2012/03/rough-idlestaling-and-erratic-shifting.html

-----------
While stop engine idles like cylinder missing?

http://schematicsdiagram.blogspot.com/2012/01/while-stop-engine-idles-like-cylinder.html

---------

These details will help.

Thanks.

Nov 24, 2012 | 2001 Ford Taurus

1 Answer

Gmc sonoma 4.3 1991 rough start up occasionally


check to see if your egr vave is sticking. if so you will need to replace it.

Feb 11, 2010 | 1991 GMC Sonoma

3 Answers

Temp guage barely moves and runs rough just off idle


Try a full tune up.. get Bosch platnium+4 spark plugs and Acel wires, do the fuel filter and air filter(i suggest K&N) buy some fuel injector cleaner or use Marvel Mystery oil. The ECU could e gone but hard to diagnose if the car needs a tune up.

Jan 18, 2009 | 1992 GMC Sonoma

1 Answer

Truck losing power and service engine soon light on


Like to other guy said, give it a tuneup. Also try SEAFOAM to clean carb up of slug. Also check to make sure the butter fly for the choke has not come loose, causing it the choke it down. Failed choke pull-off.

Dec 10, 2008 | 1995 GMC Sonoma

1 Answer

Rough idle on 1992 sonoma truck


i have a 92 sonoma as well and its suppose to be normal its due to an unbalanced camshaft

Aug 05, 2008 | 1992 GMC Sonoma

Not finding what you are looking for?
1992 GMC Sonoma Logo

Related Topics:

49 people viewed this question

Ask a Question

Usually answered in minutes!

Top GMC Experts

yadayada
yadayada

Level 3 Expert

76848 Answers

Freddy

Level 3 Expert

1311 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

Are you a GMC Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...