Question about 2010 Volkswagen CC
Does my 2010 VW CC Turbo 2.0 have a timing belt or chain?
Posted by Anonymous on
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
lrb2199: What this shop has suggested in terms of replacement is pretty much the norm.
1st, if the timing belt lets go or if it jumps time you are going to be hocking the kids to pay for the repairs.
You are looking at a Diesel engine which gets a little on the toasty side to begin with. The motor oil sometimes, depending on the selection may not be too kind on the oil seals.
When you are replacing the timing belt, there is not much more effort involved to remove the front crank and cam seals and replace them with new ones because you are right there! It's a matter of sliding a gear off or unbolting a gear to gain access to a seal.
As for the Water pump, Water pumps don't last for ever and will start to seep through what is referred to as the "WEEP" hole.
If the seal fails, antifreeze will leak onto the timing belt. Antifreeze is a very slippery substance and can potentially cause the engine to jump time. So, you have a water pump that is 9 years old and HOW MANY MILES ON IT? Personally, I would suggest putting another one on. Thermostats also have a limited service life. The part is not that expensive and with the repairs being what they are, often shops throw the labor in on replacing some parts such as thermostats if they are not a big deal. Main drive belts, again, it is a wear item, it could be well worn, possibly may have another 5,000 miles on it, but you have the opportunity to have a new one installed for just the cost of the part rather than pay labor 6 months down the road. The valve cover has to be removed to access the timing belt on some engines because of the way they are configured. Again, the part may not be that expensive, and the opportunity is there to do it while the timing belt is being replaced.
OR, the costs are nominal. Valve cover gaskets on the turbo diesel VW's do start to leak, so take advantage of the opportunity.
I can understand exactly where you are coming from because it is frightening sometimes to hear people tell their stories about what they had to pay for repair on their cars.
Brake shops as an example (NOT ALL OF THEM) seem to be notorious for selling expensive work which may not really need to be done. Example: I have been in business for 28 going on 29 years. I do not sell calipers, rotors, brake master cylinders and other costly items on the majority of the brake work which comes through my shop. WHY? Because they do not need those parts!
I had a customer who learned the hard way. We had given him a quote for brakes. In this case he did need rotors on his Mercedes.
WE use "ATE" rotors and "TEXTAR" pads which are original equipment parts. They cost a little bit more, but I don't have comebacks (complaints). The husband had to leave town and the wife thought we were too high so she called one of the national chains brake shops. They suckered her in at a price over a hundred dollars lower than mine. When she left their establishment her repair bill was a little over a thousand dollars more than my quote.
They sold her calipers, rotors, brake master, system flush, and a hot wax enema! I don't see how they can get away with things like that? I know for a FACT what that car needed because the car has been in here for regular service for over four years. His wife just thought she could save some money! I guess she did HUH?
Anyway, it sounds like your guy is on the up and up.
Got any more questions? I'll be happy to answer them.
Posted on Apr 21, 2009
i can walk u through doing a t belt. But if u are not sure if u are able to do it DO NOT DO IT cause if u are wrong if cause a lot of engine damage.
Posted on May 11, 2009
General rule on most cars with a timing belt is change somewhere between 80K and 120K. On some cars, failure of timing belt will destory the engine.
If car is only worth $2500, and labor (parts are cheap on this usually) is $1000, if you can't do it yourself, need to decide if you risk it.
Are you willing to throw away the car when the timing belt breaks? Or spend the $1000, and have some other failure that renders the car useless 5000 miles later?
This is really a financial decision you have to make. If engine blows, you may be able to get $500 for it from junkyard, and you still have your $1000 saved from not changing the timing belt.
Posted on Aug 05, 2009
SOURCE: vw sharan timing belt change?
your getting close to a change, especially if its a belt and not a chain. i know friends that had there belts changed out anywhere from 60k to 90k. Chains can go about twice as long as a belt. i you kept this car up on it servicing and dont abuse it. i"d say it"ll last till at least 70k.
Posted on Oct 04, 2009
Tips for a great answer:
Mar 20, 2017 | Cars & Trucks
Feb 09, 2017 | Suzuki Grand Vitara Cars & Trucks
Aug 20, 2016 | 2010 Jeep Patriot
Oct 08, 2015 | Cars & Trucks
Jul 20, 2015 | Cars & Trucks
Feb 24, 2015 | Jeep Cars & Trucks
Jul 14, 2010 | 2004 Honda Accord
Sep 28, 2009 | 2000 Volkswagen Beetle
Jul 30, 2009 | 2000 Volkswagen Beetle
Dec 08, 2015 | 2010 Volkswagen CC
933 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: