Question about 2001 Volvo S40
Posted by Anonymous on
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
Go to Matthew's Volvo Site and search under "ambient temp sensor" I posted detailed instructions and pictures of how to fix this. Enjoy
Posted on Jul 04, 2009
Testimonial: "Good info, thanks"
SOURCE: 2001 volvo s440 1.9t
Volvo Radiator, Thermostat and Sensors
system's temperature controls include all coolant temperature sensors,
Volvo thermostat, Volvo radiator or expansion tank cap, cooling fan(s)
and fan clutch (if equipped). These cooling system parts function
primarily independent of the engine but control the engine either
through cooling or by sending control signals to your Volvo's
The Volvo thermostat is a spring-loaded valve that opens and closes based on the temperature of the coolant flowing through it. A high temperature reading followed by a drop to normal temperature (or a continuously low temperature) is a common first sign of a sticking Volvo thermostat. However, many other conditions may cause these symptoms, so you need to know how to eliminate each possibility.
The Volvo radiator or expansion tank cap is also a spring-loaded valve reacting to system pressure. It serves to maintain proper system coolant level at predetermined pressures. It must always be replaced with an exact replacement cap with the same pressure setting. Never use other caps except for short-term emergencies!
A belt-driven fan blade for pulling air through the Volvo radiator is usually on the Volvo water pump pulley and should have a fan clutch to control it. The fan clutch allows the fan to turn with the belt at low engine speed and "free-wheel" at higher speeds. A bad fan clutch either doesn't allow the fan to spin at low speed (overheating in traffic) or doesn't allow it to free-wheel at high speed (potential overheating on highway or reduced gas mileage).
An electric fan can be either by itself (usually front-wheel drive) or auxiliary (used with a mechanical fan). Both types are controlled via a temperature sensor - in the Volvo radiator or upper Volvo radiator hose or on the Volvo thermostat or Volvo water pump housing. This sensor is usually an on/off type switch with a fixed temperature setting. (Some vehicles may have 2-3 settings for multi-speed fans.) This sensor is commonly called an "auxilliary fan switch".
Other common temperature sensors are: 1) gauge sender (variable output); 2) warning light sender (on/off type); 3) lambda and/or fuel injection sensor(s) (variable to control fuel injection settings); 4) thermo-time switch (cold start valve control). Your Volvo may have other sensors as well.
Temperature control is critical to both performance and emission control. Unfortunately, this system is the most difficult to troubleshoot without proper equipment and diagrams. It's even more difficult with computers that adjust timing, idle speed, vacuum and fuel delivery automatically to make up for potentially faulty temperature sensor signals.
Maintenance of your cooling system sensors is virtually impossible since there's nothing really to "maintain". Keeping them clean both internally (coolant replacement) and externally (engine cleaning) is the best way to ensure trouble-free driving. Checking and replacing all parts at the factory-recommended time or mileage limits helps as well
Posted on Jul 23, 2009
No, not at all.
Posted on Sep 05, 2009
Testimonial: "Thanks for the quick response - one year on the warranty is $1990, so we will passs on it."
The fuel pressure regulator is located in the fuel rail, held in by a torx screw.
Release pressure from the system by cranking the car with the fuel pump fuse out, or byt depressing the relief valve on the end of the fuel rail.
Unbolt the regulator/housing assembly, unhook the vacuum hose, and remove the regulator/housing assembly.
Installation is reverse order.
If you need to replace the regulator that is located in the fuel pump, it is not serviceable. Luckily they rarely fail.
Posted on Sep 14, 2009
Tips for a great answer:
Oct 07, 2015 | 2001 Volvo S80
Aug 22, 2014 | Volvo S40 Cars & Trucks
Feb 22, 2014 | Volvo S40 Cars & Trucks
Jun 10, 2010 | 2001 Volvo S40
Apr 06, 2010 | 2001 Volvo V70
Nov 11, 2009 | 2003 Volvo S40
Oct 30, 2009 | 2000 Volvo S40
83 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: