Question about Nissan Versa

Open Question

2012 nissan versa turn signal flasher - Versa Nissan Cars & Trucks

Posted by Anonymous on

4 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

morse008
  • 1111 Answers

SOURCE: Where are the turn signal flashers located on my 1987 nissan maxi

are you referring to the 4 way flashers or the fuse if its the 4 way it should be on the dash or wheel itself .......if the fuse inside the glove box or along side the fuse panel or under the hood in a black box

Posted on Sep 06, 2009

  • 2 Answers

SOURCE: Location of Turn signal flasher for 95 Nissan 4wd 4cyl MT

Found it!! - It is indeed under the dash, directly above the clutch pedal arm and attached to the brake support bracket. The original one was black and NOT round. It's about 1.5 inches long and 1 inch square. The three wires drop down out of the bottom and there is a connector release you have to push to release the wires. The flasher relay itself can slide off the mounting point, with a little extra pressure, pushing towards the left side (outward) of the truck. (left hand drive models).

Posted on Jan 12, 2010

bcharais
  • 278 Answers

SOURCE: has anyone had problems with windsheilds breaking in the 2012 nissan versa?

has this vehicle been in any accidents? rock chips? big bumps/ pot holes. These may be the culprits. one more, aftermarket glass?
sorry I don't own a nissan.

Posted on Aug 03, 2012

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My 2012 nissan versa won't move is the extronic cvt done


Have the codes read. Could be the control module or a chip inside the transmission that has failed.

Jun 12, 2016 | 2012 Nissan Versa

1 Answer

Why are my blinkers working i changed the flasher and the switch on steering column i have a1987 nissan v-6 se 4x4 trvuck?


See troubleshooting basic turn signal and flasher problems

www.procarcare.com/includes/content/.../ch14/14TSTurnSignals.html
Most problems in the turn signal or flasher systems can be reduced to ... Occasionally, problems in the turn signals are traced to the switch in the steering column, which ... One turn signal light on one side doesn't work Check and/or replace bulb. ... Often the filaments have been reversed In systems combining stoplights with ...

where is the flasher(turn signal relay)located ... - CarGurus

www.cargurus.com > Questions > Chevrolet > Cavalier

CarGurusApr 17, 2007 - Emg. flashers work but L/h and R/h signals dont. ... How do I get that cover. off my steering wheel? ... How to change Flasher Fuse 4 answers.

Turn Signal Switch Replacement - YourMechanic


Dec 15, 2015 | Nissan Cars & Trucks

1 Answer

My turn signal lights work but my hazard lights don't for my 2012 Chevy Ltz Malibu


The flasher is built into the flasher. If the flasher is on the dash replace it. If it on the steering column, replace the turn signal switch.

Dec 26, 2014 | Cars & Trucks

1 Answer

Where is the turn signal flasher located for a 2000 Nissan Quest


2000 Nissan/Datsun Truck Quest Mini Van 3.3L SFI 6cyl


Flashers

Print
The turn signal/hazard lamp flasher is located behind the driver's side of the instrument panel to the right of the steering column.on the fuse block
REPLACEMENT
  1. Disconnect the negative battery cable.
  2. Locate the flasher assembly under the driver's side of the instrument panel. Press the tab on the flasher and slide it from the bracket.
  3. Detach the flasher from the electrical connector and remove the flasher from the vehicle.
  4. The installation is the reverse of the removal.

Nov 04, 2013 | 2000 Nissan Quest

1 Answer

4 way flasher switch


I think the flasher light and the actual turn signal light are two different lights..take the flasher bulb out and put it in the place of your turn signal light and see if that works..hope that fixes your prob

Jun 09, 2013 | Nissan Maxima Cars & Trucks

1 Answer

Lost turn signals on 2012 Chevy sonic


there are two 1 inch by 1 inch cans in your fuse box these are the emergency flasher and the turn signal flasher; turn on the emergency flasher button and, you will hear the emergency flasher clicking. swap the flashers (they just pull out and, plug in replace the one that doesn't click when activated

Feb 05, 2013 | Cars & Trucks

1 Answer

Signals not flashing on a 2007 pontiac wave


It can be issue with flasher unit causing the problem:---

To troubleshoot the issue go through the solved help links mentioned below:-----
Click the link :----

Turn Signal Not working

http://technoanswers.blogspot.com/2012/11/turn-signal-not-working.html

-----------

Right turn signal not working on Pontiac Car?

http://schematicsdiagram.blogspot.com/2011/12/right-turn-signal-not-working-on.html

------------

SOLVE YOUR 4 WAY FLASHER RELATED PROBLEMS HERE

http://repairhelpcenter.blogspot.com/2012/11/4-way-flasherturn-signal-flashersignal.html

----------

These details will help.

Thanks.

Dec 05, 2012 | 1995 Plymouth Acclaim

1 Answer

Can anyone find a wiring diagram for a 2012 Nissan Versa online? Not a Manual


No--- they are only put out under licence from manufacturer,
to a manual publishers & data base suppliers

A repair shop with a data base can print just the page you need

Oct 10, 2012 | 2012 Nissan Versa 1.6 S Sedan 1.6L 4-cyl....

1 Answer

1992 nissan maxima no indicators working


check the fuses first then if they are good then you could have a bad signal flasher that needs to be replaced.do the lights work front and back when trying the signals,if so then it could be the flasher.note that the hazard flasher looks the same as the signal flasher,also do the hazard lights work when operated if so this indicates the signal flasher as well,and eliminates the turn signal switch as the problem.

Sep 01, 2011 | 1992 Nissan Maxima

1 Answer

My turning signal don't work but the flashers do work. I have changed all fuses and they still don't work.


since you know where the fuses are, you also know where the flashers are. the flashers are the same part so unplug the one for the emergency flasher and put it into the socket for the turn signals and vice versa. if the signals now work but not the emergency flasher you know to get a new flasher unit at any parts store. the flasher units are cubes about an inch on each side plugged into the fuse panel.

Jun 27, 2011 | 1995 Chevrolet Caprice Classic

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

124 people viewed this question

Ask a Question

Usually answered in minutes!

Top Nissan Experts

yadayada
yadayada

Level 3 Expert

75197 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

14251 Answers

Are you a Nissan Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...