Question about Cars & Trucks

Open Question

Mazda e2200 van immobiliser will not switch off any clues

Posted by Anonymous on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 350 Answers

SOURCE: Ford Courier Van imobiliser stuck on

hi not as simple as that have you checked all the fuses and corresponding relays and wiring connectors there is a web site that gives you the wiring diagrams for the security systems if you are ok with wiring diagrams then you will either be able to by-pass or or put a remote start switch in but as i said it is not a five miniute job if you want i can send you the sites details yates210456

Posted on Oct 17, 2008

  • 7353 Answers

SOURCE: hi my gear box is stuck in 4th gear, is it front mazda e2200 van

Front.

Posted on Nov 10, 2009

  • 1 Answer

SOURCE: gear box is stuck in 4th gear on my mazda e2200

check the linkages (rods connecting stick and gearbox) my e2000 is also stuck in third mechanic friday then ill post my discoveries

Posted on Jan 04, 2010

duane_wong
  • 6826 Answers

SOURCE: i have a mazda e2200

There could be a short to ground in one of the wires. Perhaps take it to an auto electric shop to investigate further.

Posted on Aug 14, 2010

  • 213 Answers

SOURCE: how do you tighten the

see the generator in the engine the fan belt goes around it there is a iron strip attached to the generator which holds the generator loosen this screw a bit and pull the generator with an iron bar or some thing that can when the belt is tight tighten the screw

Posted on Jan 29, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Ford 1985 e350 econoline van manual


check around the shops for a 1985 workshop manual for a mazda e2200 easy loader as they were the same vehicle just rebadged

Oct 30, 2014 | Ford E350 Cars & Trucks

1 Answer

Mazda 6 immobiliser light flashing and car will not turn over


Immobilisers may intercept one of three circuits; typically the low-voltage ignition circuit and the fuel pump circuit. Some may also intercept the low-current starter motor circuit from the key switch to the relay. The Immobilisers can be set to intercept these circuits IF you use a key that has been copied or someone tried to start the car with the key for another car. Once activated, most of the time they are on a timer, meaning they will reset in 10 to 20 minutes. You can try and reset yours by disconnecting the battery, remove both cables and touch the two cables together for ten minutes. Now if you have a radio that needs codes to reset it be sure you have the codes before disconnecting the battery. Some Immobilisers use a magnetic switch to turn off the car. buy disconnecting the battery and touching the cables together you will kill the magnetic field and reset it. Hope this helps fixya up.

Mar 15, 2011 | 2006 Mazda 6

1 Answer

How do you tighten the fanbelt on a mazda E2200 panel van


see the generator in the engine the fan belt goes around it there is a iron strip attached to the generator which holds the generator loosen this screw a bit and pull the generator with an iron bar or some thing that can when the belt is tight tighten the screw

Jan 29, 2011 | Mazda B2200 Cars & Trucks

1 Answer

I have a mazda e2200 1988 diesel van. the 10 amp engine fuse keeps blowing, what can cause this?


There could be a short to ground in one of the wires. Perhaps take it to an auto electric shop to investigate further.

Aug 14, 2010 | Mazda B2200 Cars & Trucks

2 Answers

Gear box is stuck in 4th gear on my mazda e2200


check the linkages (rods connecting stick and gearbox) my e2000 is also stuck in third mechanic friday then ill post my discoveries

Nov 10, 2009 | 1986 Mazda 626 Coupe

1 Answer

E2200 oil light comes on when cold then goes off after warmed up. The oil level is good


try replacing oil preasure switch, if light still comes on then have oil preasure checked , (when cold) may need oil pump if presure is low, if you caught problem early you wont do any engine damage, again start with the switch .hope this helps.

Oct 15, 2009 | 1988 Mazda B2200

2 Answers

Mazda 1997 E2000 VAN, WIPERS WORKING only dead slow, replaced motor, switch & control


hi fixya pls i need a mazda e2200 van to buy and my name is fitzgerald from west africa ghana . and email address is kengfiz@co.uk

Dec 14, 2008 | 1999 Mazda B-Series

1 Answer

Ford Courier Van imobiliser stuck on


hi not as simple as that have you checked all the fuses and corresponding relays and wiring connectors there is a web site that gives you the wiring diagrams for the security systems if you are ok with wiring diagrams then you will either be able to by-pass or or put a remote start switch in but as i said it is not a five miniute job if you want i can send you the sites details yates210456

Oct 05, 2008 | 2000 Ford Escort

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

36 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

yadayada
yadayada

Level 3 Expert

75005 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...