Question about Lexus Cars & Trucks

Open Question

Loose side door mirror on a 2009 is 250 Lexus

Housing wobbles how do I tighten

Posted by Anonymous on

Ad

5 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad
  • 76 Answers

SOURCE: How to replace the Passenger side Rear View Mirror on door.

there should be a plastic cover on the inside of the car where the mirror is take this off and there will be a connector block unplug this and there should be screws undo them and the whole thing should come off themn and you should be able to seperate them then.

Posted on Jul 30, 2008

Ad

SOURCE: Driver side mirror is loose and want stay in place, how do you tighten it?

You'll have to remove the door panel to access the screws which hold it on.

Posted on Apr 23, 2009

  • 1 Answer

SOURCE: drivers side mirror loose folds all the way back towards front of car Power operated Lexus Ls 430

I already took care of the problem, Thanks for your concern.... Joe M...........

Posted on Apr 29, 2009

  • 1986 Answers

SOURCE: Driver Side Mirror

On the inside trim, you can remove screws that are by the door handle, arm rest, under door and side of door and then gently pull back on the panel as there will also be retaining clips attached and you don't want to break them. You'll need to lift the door panel upwards in order to get it off the window ledge. Then you'll need to manipulate the panel and disconnect the door handle linkage from the door handle and disconnect the wiring for your controls. Then you can access the bolts that secure the mirror onto the door

Posted on Sep 29, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

2001 F250 mirror loose, how to tighten?


the triangel cover on the inside towards the front of the door. pop it off and youll see three 10mm bolts that hold the whole housing to the door.

Apr 11, 2014 | 2001 Ford F-250 Super Duty

1 Answer

Tighten side mirror


If the mirror housing is loose and nothing has hit it and broken the mounting to the door frame, yes. If it is the glass part that is loose and it is a electric or manual mirror, something has damaged it behind the glass replacing it will fix problem.

Dec 07, 2013 | 2007 Lincoln Mark LT

2 Answers

Door mirror housing wobbly


open the door there is a panel remove and you will see the nuts for the mirror.

Sep 18, 2012 | 2003 Ford Focus

1 Answer

I have an 05 Hyundai Tiburon GT and the top side mirror housing is loose, but the whole housing is attatched to the door of my car. How can I tighten the top housing that holds the mirror?


Each Tiburon has an interior triangle cover (some with tweeter speakers in them), They are easily popped of using a small screw driver so you can access/see the three 10mm nuts holding the outside mirror to the door. When you inspect the fasteners (10mm nuts), check to see if each is tight (not loose). You may find that the one at the top could be broken.... the only solution then is replace the mirror (it'll probably have to be painted if you do replace it).

Jun 10, 2011 | Hyundai Tiburon Cars & Trucks

1 Answer

How do I take the rear view mirror off a 2005 ford territory? it has seems to have a metal pad that the mirror slides onto. my current mirror wobbles while I drive - apparently it is a common fault?? I...


There should be a small set screw on the side of the metal pad that tightens against the mirror to keep it from wobbling. It may be loose or missing. It takes a very small allen wrench to tighten the set screw. If tightening the screw doesn't stop the wobbling, you can loosen it far enough to slide the mirror up and out of the bracket. Slide the other mirror into the bracket and tighten the set screw.

Dec 22, 2010 | 2005 Ford Explorer

1 Answer

Passenger side mirror is loose, how do i tighten it?


If the mirror housing is loose where it attaches to the door panel, you will probably have to remove the inner (inside the car) door panel to gain access the 2 or 3 nuts or bolts that secure the housing to the door and tighten them.

Sep 03, 2010 | 1999 Volkswagen Beetle

1 Answer

1994 chevy silverado driver side mirror is loose


try removing the black cover that wraps out from the door to the mirror just be carefull.....plastic ****.

Apr 25, 2010 | Chevrolet Silverado Cars & Trucks

1 Answer

The passenger mirror on my 2003 Toyota 4 Runner wobbles. How can I tighten down the mirror on the base?


With my 4 runner, I had the same problem. All I needed to do was use a phillips head screw driver and tighten up a screw that is underneath the mirror housing. i.e. there is a screw hole on under side of the hosing for the mirror. Find that hole and tighten (it may seem tight already, but just give it a little bit more torque and see if that helps)

Mar 18, 2010 | 2003 Toyota 4Runner

1 Answer

Power mirrors are loose, how do i tighten them?


Hi, if the complete unit is loose you will find bolts on the inside of the door just above the door panel behind a cover (usually a triangular shaped cover), that you will have to tighten. If the mirror glass is loose you should find a hole underneath the mirror housing where you have to put a screw driver in and tighten the screw on the inside to secure the glass.

Jan 17, 2010 | 2003 GMC Sierra 1500

1 Answer

2004 rx330 passenger side mirror wobbly


On the bottom of the mirror casing there are three screws - one visible and two hidden by a plastic panel. To open the plastic panel use a small knife or screwdriver and pop it open using the small **** on one edge of the panel. Careful - if one or both of the screws are completely loose, they will drop on the ground and most likely end up in that endless black hole where all those socks go when we wash them. ;)

Mar 19, 2009 | 2004 Lexus RX 330

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

412 people viewed this question

Ask a Question

Usually answered in minutes!

Top Lexus Experts

yadayada
yadayada

Level 3 Expert

76109 Answers

ROBERT GARCIA
ROBERT GARCIA

Level 3 Expert

902 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Are you a Lexus Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...