Question about BMW 318
Posted by Anonymous on
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
SOURCE: Radiator removal BMW 316i
hi, the two clamps that secure the radiator have a small slot on the top, if you insert a small screwdriver into the slot and use it as a pry bar you should be able to unclip the holding clamp and it then releases like a hinge.
Posted on Feb 24, 2009
the window regulator has failed. the door panel has to be removed first which requires removing the trim piece that is on the grab handle (extremely hard to remove without breaking) there are three of four screws that hold the door panel on. once the door panel is off, the vapor barrier has to be removed. don't tear it, it is there for a reason to keep water out of the vehicle. make sure you reseal it properly with window weld. once the vapor barrier is removed you will need to unclip the window glass from the regulator. i typically will take and break the tab that holds the window. once the window is loose, move the glass all the way to the top of the door. now remove the regulator, swap the motor over, and reassembly. i would recommend taking the vehicle to a bmw dealership, around $650 for the complete repair and the dealership will stand behind their repairs
Posted on May 03, 2009
SOURCE: bmw 316i overheating
check if the water is circulating as you might have a blockage in the header tank. this can be checked by opening the radiator cap and check if the water is circulating on top.
Posted on Jul 28, 2009
You'll need to remove screws that are by the door handle, arm rest, under door and side of door and then gently pull back on the panel as there will also be retaining clips attached and you don't want to break them. If needed, you can pull back the weather seal (can't reuse it, but it's not that important) and you will be able to access everything inside the door
Posted on Aug 14, 2009
SOURCE: bmw 316i overheating
I am having overheating problems with my BMW 316i...The heating in the car has now been working for some time now but about 4 days ago...the car started to overheat...within minutes of starting the car from cold...the temp gauge shoots up to half way and within 7-10 mins its in the red....What could it be???
Posted on Feb 02, 2010
Tips for a great answer:
Jan 07, 2015 | 1993 BMW 316i
Jan 26, 2013 | 1997 BMW 3 Series
Mar 18, 2010 | 1996 BMW 318
Mar 01, 2009 | 1999 BMW 318 ti
Nov 18, 2017 | BMW Cars & Trucks
51 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: