Question about 2002 Chevrolet Malibu

Open Question

Remove driver seat on 2005 Malibu - 2002 Chevrolet Malibu

Posted by Anonymous on

5 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 6982 Answers

SOURCE: Can I get the procedure to remove the power

Seat is held to the floor with four bolts. Remove them and disconnect wiring harness.

Posted on Aug 06, 2009

  • 3911 Answers

SOURCE: remove drivers seat on 2002 malibu

Seat is on rails. Look at the back of the rails, remove those two bolts and the whole thing will then tilt up and forward and come out. If there are wires you will have to disconnect the plug.

Posted on Apr 20, 2010

p_schneider
  • 2 Answers

SOURCE: drivers seat how do i

Brackets are broken off welds. Remove two rear torx bolts, tilt seat forward to unclip front, pull seat and re-weld brackets.

Posted on Apr 10, 2012

  • 11 Answers

SOURCE: how to remove drivers side seat 1999 chevy malibu

Usually configuration on any seat. Slide seat all the way back and take out 2 front bolts. Sometimes the bolts are covered with a plastic cover that needs to be removed. Slide seat all the way forward the remove the 2 back bolts. Then I usually tilt the seat backwards and unhook any wires underneath. Carefully lift seat out of the vehicle being careful not to scratch the car.

Posted on Sep 24, 2012

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Drivers power seat will not move forward from full rear position.how do I access rear bolts to remove seat for repair? all seat switches work


I would look real careful under the seat and make sure that there is nothing obstructing the movement. Also check the tracks that it sleds on for pennies or anything else blocking it as well.

Sep 01, 2015 | 2005 Chevrolet Malibu

2 Answers

How do i remove passenger side front seat on a chevy malibu


I don't have one in front of you, so this is a generic answer. Important: unhook wiring connector or connectors under the seat! If you don't, you will rip it out when you remove the seat and it will be a huge expense to repair/replace it. You should see 4 bolts that attached to each seat legs, unbolt these. If there is nothng else attached to it, you simply remove the seat.

Dec 10, 2014 | 1999 Chevrolet Malibu

1 Answer

How to remove drivers side seat 1999 chevy malibu


Usually configuration on any seat. Slide seat all the way back and take out 2 front bolts. Sometimes the bolts are covered with a plastic cover that needs to be removed. Slide seat all the way forward the remove the 2 back bolts. Then I usually tilt the seat backwards and unhook any wires underneath. Carefully lift seat out of the vehicle being careful not to scratch the car.

Sep 24, 2012 | 1999 Chevrolet Malibu

1 Answer

Remove cushion on drivers side seat 2004 malibu


the seat back has a strip along the bottom edge that over laps and holds it the bottom has clips around the outside edge

Aug 15, 2012 | 2004 Chevrolet Malibu

1 Answer

How do I remove my front seats in my 2005 chevy malibu?


They should be bolted to the floorpan, just use the correct socket or wrench and remove the bolts, and lift out of the car.

Aug 24, 2010 | 2005 Chevrolet Malibu

2 Answers

Drivers seat how do i take it out 2005 malibu drivers seat is sagging on the right rear


pry off any plastic bolt covers where the bolts secure the seat
pull 4 bolts securing seat to vehicles floor pan
Disconnect negative battery teminal,
disconnect any electrical plugs going to the seat
pull out drivers door opening

Aug 19, 2010 | 2005 Chevrolet Malibu

1 Answer

Power seat wont move. replaced the 30 fuse. still nothing


seat connector out of place ... remove screw at seat base molding .. pry open lightly ...push connector towards seat control switch
test operation....
reattached screw
your good to go
john

Feb 16, 2010 | 2005 Chevrolet Malibu Maxx

2 Answers

2004 Malibu with broken weld on seat motor


you will have to replace the complete assy. the cheapest way is look for a complete wrecking yard seat, or have yours welded at a local machine shop

Jan 08, 2010 | 2004 Chevrolet Malibu

1 Answer

Driver Pwr Seat - Half Works & Vanity Mirro


I had the same problem with my 2005 malibu vehicle. To find out the welds they use under the seat to connect the steel brackets are not that strong and snap leaving the seat at an angle position.The best bet is to look under the seat at the side thats angled down and look for a long metal pipe with a U shape it might look a little rusted.If this is so you need to find a welder to reweld the two pieces.

Aug 24, 2008 | 2005 Chevrolet Malibu

Not finding what you are looking for?
2002 Chevrolet Malibu Logo

Related Topics:

78 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

75807 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22133 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8172 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...