Question about 1991 Chevrolet C1500

1 Answer

(How do I replace rear bearings) chevy sliverado RWD

I have a 2003 sivlerado and the passenger rear wheel look like the bearing might need to be replace because the wheel does not sit up straight.

Plus, when I'm driving, the rear of the truck trembles and shacks.

If it is the bearings how do i go about replacing or doing the work myself?

Posted by on

  • 1 more comment 
  • alex77daniel Jan 12, 2009

    mrgreenz, thanks



    I think this will solve my problem. I will let you my progress in a day or so.

  • Rick Byrd
    Rick Byrd May 11, 2010

    wheels don't lean because of a bad bearing , are you sure your lug nuts aren't falling off . or a bent axel ? check those lug nuts first and post back for a solution please . cheers

  • Anonymous Mar 22, 2014

    need the size of wheel bearing nut on 2005 chevy truck

×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 962 Answers

Check to see if the drum is hotter than normal. If the bearings are bad, you have to lift the truck and remove the axle. Remove the wheel drum until you get to the axle. They to remove the axle, you have to open the rear end Spider gear ***** at the middle. They have a half moon wedge or a clip you have to remove. They you pull out the axle.Replace the bearing grease it and seal it. Then put it back in the reverse order. Sounds simple but it is not that simple. Takes work

Posted on Jan 11, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do you replace the rear wheel hub on a 2003 Kia sedona. All I can find is directions on front not back.


Wheel Bearings

Print
Adjustment

2002-05 Models
  1. Before servicing the vehicle, refer to the precautions at the beginning of this section.
  2. Remove or disconnect the following:

    Rear wheel Brake drum Hub cover Cotter pin Lock nut cover
  3. Adjust the locknut to achieve wheel bearing play of 0.001-0.006 inches (0.025-0.152 mm).
Removal & Installation

2002-05 Models
  1. Before servicing the vehicle, refer to the precautions at the beginning of this section.
  2. Remove or disconnect the following:

    Rear wheel Brake drum Hub cap Cotter pin Lock nut cover Lock nut Wheel bearing retainer washer and the outer wheel bearing Hub assembly Grease seal Inner wheel bearing
  3. Clean and inspect the wheel bearings and races for unusual wear or damage. Replace parts as necessary.
To install:
  1. Pack the wheel bearings with grease for assembly.
  2. Install or connect the following:

    Inner wheel bearing Grease seal Hub assembly Lock nut. Adjust the locknut to achieve wheel bearing play of 0.001-0.006 inches (0.025-0.152 mm). Lock nut cover Cotter pin Hub cap Brake drum Rear wheel

Apr 03, 2015 | 2003 Kia Sedona

1 Answer

Rear end noise on a 2003 dodge ram 2500 RWD truck makes noise while driving but not while stopped with rear end jacked up and wheels spun by hand


Most likely a bearing in rear end. Pinion or wheel bearings. Have a good independent shop install noise sensors located at each bearing location to verify which one it is. Oh yes I'm assuming you have done the obvious check it for proper level of lubrication in the rear end.

Mar 16, 2014 | 1999 Chevrolet Blazer

2 Answers

How to replace rear wheel bearing


I think you can take it to the near car repair shop.
_______________
car keys replacement

Oct 08, 2012 | Lincoln Town Car Cars & Trucks

2 Answers

Procerure to replace wheel bearing assy 2004 nissan altima 4cyl


Go to YOU TUBE and put in replacing wheel bearing hubs for
nissan altima & watch

There is a lot to see even if on a different vehicle

I doubt you have the tools to do the job

Sep 19, 2012 | Nissan Altima Cars & Trucks

1 Answer

Rear brake on passenger side getting wheel hot, GMC Sonoma


I have a 2003 gmc Sonoma ZR5 4x4 the wheel bearing went out on the passenger side I replaced both bearings when I got it back together the brum on that side was getting hit I replacer the caliper on both sides an its still getting hot only on that side what could it be

Sep 03, 2012 | Oldsmobile Cars & Trucks

1 Answer

Changing wheel bearing 1992 dodge caravan


WHAT WHEEL BEARING BEING REPLACED.REAR AXLE BEARING. FRONT BEARING RWD OR AWD WITH HALF SHAFT HUB BEARING.REASON I ASKED YOU BECAUSE ALL THREE HAS DIFFERENT PROCEDURE FOR REMOVING WHEEL BEARING.

Nov 03, 2010 | Dodge Grand Caravan Cars & Trucks

1 Answer

What size is a replacement wheel bearing for passenger front pt cruiser 2003


b8daacb.png
Wheel Bearing I.D. : 1.6535"
Wheel Bearing O.D. : 2.992"
Wheel Bearing Width : 1.5354"
Wheel Bearing Type : Double Row Tap

Sep 25, 2010 | 2003 Chrysler PT Cruiser

1 Answer

How to replace rear wheel bearing on 2003 chevy s10 4x4 zr2? My skill level is basic, I do the oil changes and tune-ups on my truck but not to much more. It is a ''Do-ItYourSelf'' jobs or is the maybe...


its not hard but you do have to remove diff cover and then take out spider shaft to remove clips that hold axle. then remove bearing with slide hammer or puller. if bearings are bad so is the axle because its part of the bearing

Jun 20, 2010 | 2003 Chevrolet S-10

1 Answer

2wd front wheel need to replace bearings or hub assembly which is best


A Front Wheel Drive Vehicle Can Have Two Types Of Rear Wheel Bearings: Serviceable Bearings, Or Nonserviceable, Sealed Bearings. When Sealed Bearings Fail, The Bolts Holding The Bearing And Hub To The Axel Or Control Arm Must Be Removed. When Installing The New Bearing Assembly, Torque The Bolts To Specifications.Some Manufacturers require The Use Of New Fasteners When Rear Bearings And Hubs Are Replaced.

When A Serviceable Wheel Bearing Is Used, The Bearing Can Be Disassembled And Packed With Grease.It Is Serviced Like A Front Wheel Bearing On A Rear-wheel-Drive-Car.

Apr 09, 2010 | 2003 Ford Explorer Sport Trac

2 Answers

Whining noise rear passenger wheel and it's not properly in line how do I fix this?


Hi I am Vortash sounds like you have a rear wheel bearing gone , they sound like a whine at first then they get progressively worse to a grinding sound you should replace it as soon as possible before it damages your spindleregards Vortash

May 30, 2009 | 2003 Lexus Gs 300

Not finding what you are looking for?
1991 Chevrolet C1500 Logo

454 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

70347 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22041 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6876 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...