Question about Cars & Trucks

Open Question

How to remove front door speakers from a 97 nissan pulsar ?

Do I have to take off the whole door panel

Posted by on

Ad

4 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get to try the service completely Free afterwhich it costs $6 per call and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
  • 265 Answers

SOURCE: remove door panel on 97 nissan maxima

remove screws - they is probably one around the door handle (carefully pry out cover piece) - and underneath any big round (1 inch diameter) plastic screw hole cover - then carefully pry off.

Posted on Feb 05, 2010

Ad
  • 87 Answers

SOURCE: Door Panel Removal 1995 Nissan Pathfinder with

screws in armrest and a swift tug

Posted on Jul 22, 2010

  • 11 Answers

SOURCE: i own a 1993 nissan pulsar, i think also known as...

Have you checked whether you removed the screw door handle? It's accessible when you pry off the plastic of the door handle carefully..

Posted on Aug 31, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Nissan pulsar electrical harness between body and door connecting to door


you should be able to loosen screw to split the connection, if i think this is the type you have then the clips are used to keep bolt from falling out, you should be able to loosen and pull connector apart

Dec 01, 2013 | Cars & Trucks

1 Answer

Replace front speakers


You would have to open the door panel to replace front speakers. Look for any screws around the door handle. look at the whole door panel for any screws so that you may remove the panel in order to reach the speakers. once the panel is free from any visible screws, use a door panel remover ($5-10) and use it to pry off the panel, use it around the door panel push-in connectors, and don't use extreme force, may break connectors. once the connectors around the whole panel are removed. make sure your window is down before the whole procedure. then pick up the panel from the bottom (push up), then the panel should be off the door, if you want to change the speakers, you don't need to take any of the wiring to the window/door lock. simply remove the cover if any over the stock speakers, usually some screws. once the cover/screws are off. the speaker should come off. You will see two wires off the speakers (the red(positive) the black(negative)), once the stock speaker is removed, simply attatch the new speaker to the wires. make sure the negative and positive from the car DO NOT TOUCH, you WILL short circuit and blow a fuse, maybe worse, and it's not worth the time fixing. hope this helps, good luck.

Jun 12, 2011 | 2004 Volkswagen Beetle

1 Answer

Trying to figure out the dimesions of my front door and back seat speakers in my 97 nissan king cab pickup


According to my listing and it doesn't say anything different about a regular or king cab but what is says is for the front speakers: 4" x 6" doors, rear speakers: 6 1/2" side panels. I hope this was the information you needed and that it helped. Good luck.

Apr 22, 2011 | 1997 Nissan Pickup

1 Answer

I own a 1993 nissan pulsar, i think also known as...


Have you checked whether you removed the screw door handle? It's accessible when you pry off the plastic of the door handle carefully..

May 17, 2010 | Cars & Trucks

1 Answer

Remove door panel on 97 nissan maxima


remove screws - they is probably one around the door handle (carefully pry out cover piece) - and underneath any big round (1 inch diameter) plastic screw hole cover - then carefully pry off.

Jan 19, 2010 | 1997 Nissan Maxima

1 Answer

Removal of Front Door Handle Pintara Nissan


On the inside trim, you can remove screws that are by the door handle, arm rest, under door and side of door and then gently pull back on the panel as there will also be retaining clips attached and you don't want to break them. You'll need to lift the door panel upwards in order to get it off the window ledge.

Sep 21, 2009 | 1983 Nissan Pulsar

2 Answers

I am looking for a diagram or picture as to how to get to the speakers to replace them on a 97 villager??


Section 15-03: Speakers 1997 Villager Workshop Manual DESCRIPTION AND OPERATION Radio Speakers All vehicle sound systems are equipped with radio speakers (18808) located at all four corners of the vehicle. The radio speakers are mounted in the RH front door (20124) and LH front door (20125), as well as behind the quarter trim panels (31012) in the rear of the vehicle. The Ford Super Sound Audio System has the addition of a subwoofer mounted in the RH quarter trim panel.
-----------------------------------------------------------------------------------------
Radio Speakers, Front Door Removal
  1. Remove the front door trim panel (23942). Refer to Section 01-05 .
Trim Panel(s), Door Front
Removal
  1. Disconnect the battery ground cable (14301) if equipped with power locks or power windows.
  2. svv~us~en~file=ani_caut.gif~gen~ref.gif CAUTION: Use care when removing the front door inside handle escutcheon (22620). Failure to do so can result in damage to the component.
    Carefully pry off the front door inside handle escutcheon by inserting a standard 1/4 inch screwdriver between the top rear portion of the front door inside handle escutcheon and the front door trim panel (23942).
  3. Remove the three cover caps and front door trim panel screws.
  1. Remove the one front door trim panel capped screw from the door pull handle.
  2. If equipped with power windows, remove the door pull handle. Disconnect the electrical connectors.
  3. Slide a flat-bladed tool behind each of the retainers and twist the tool to disengage the front door trim panel from the front door (20124).
  4. Remove the front door trim panel.

Door Electrical Connections
Removal and Installation
Refer to Section 01-11 for Power Window, Section 01-09 for Power Mirror, or Section 01-14B for Power Locks. Watershield
Removal
  1. Remove the Front Door Trim Panel . Refer to the removal procedure in this section.
  1. Remove the front door watershield by carefully detaching it from the adhesive.
  1. Remove the four front door radio speaker screws.

May 20, 2009 | 1997 Mercury Villager

1 Answer

Audio wiring diagram of a nissan datsun pulsar (N12) 1983


Constant 12V+ Red/Black Switched 12V+ Blue Ground n/a Illumination Red/Yellow Dimmer n/a Antenna Driver's Pillar Front Speakers 4" Dash Left Front (+) Blue/White Left Front (-) Blue/Yellow Right Front (+) Brown Right Front (-) Brown/White Rear Speakers 5 1/4" Side Panels Left Rear (+) Red Left Rear (-) Green Right Rear (+) Blue Right Rear (-) Pink

May 15, 2008 | 2006 Datsun Pulsar

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

2,020 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

yadayada
yadayada

Level 3 Expert

76630 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...