- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Check the attaching nut for the wiper blade. They will come loose over time. Pop up the cover on the wiper ,there is a 13mm nut try tightening it. Make sure the wiper arm and motor are in the park position before tightening.Good luck.
1. check the fuse to the rear wiper motor
2. check for power to rear wiper motor at the motor (power wire going in to the wiper motor with rear wiper switch on)
If you have good fuses & have power going in to the rear wiper motor...
3. Pull old rear wiper motor and install a new rear wiper motor.
Thank you please drive thru......
my 2004 expedition had same problem, if you take apart the shaft that goes thru the glass it will be full of dirt, clean ,lubricate and reinstall, you may have to replace the O-ring on the shaft. a 20 minute job, very easy fix
The motor is usualy central to the wiper arms and either bolted to the firewall or inside the plenum chamber at the bottom of the windscreen.If you can hear the motor you can find it, track it down by listening.Your probly right about linkage however if that is the case you should be able to move the wipers with your hand and they should move freely if they dont you may have other problems.