Question about Pontiac Grand Prix

1 Answer

How to install engine oil dipstick tube 1999 grand prix gt

Oil dipstick tube

Posted by on

  • b211
    b211 Dec 01, 2012

    i dont know where the hole is tho cuz i didnt take it out my buddy did

×

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Sergeant:

    An expert that has over 500 points.

    Governor:

    An expert whose answer got voted for 20 times.

  • Expert
  • 180 Answers

Unbolt the tube from engine block,wiggle it slowly pulling up and it will come out and repeat process to put it back in

Posted on Dec 01, 2012

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get 2 Free calls (no credit card required) and instant help on almost anything you can think of (from cars to computers, appliances, handyman, and even pets).
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
  • 8 Answers

SOURCE: how do i install a oil dipstick tube in a 350

left side of the engine if you turn the tube so the curve faces down you should be able to wiggle and twist it into place

Posted on Nov 09, 2009

  • 214 Answers

SOURCE: How do I replace the oil dipstick tube?

The dipstick can be pulled out of the block with a pair of vicegrips and the new one driven down into the block. Before trying to pull the dipstick tube out make sure it is not held onto the block with a small bolt.

Posted on Jan 20, 2010

RJones1125
  • 373 Answers

SOURCE: 2003 Pontiac Grande Am Gt 3400 engine

you can pull the valve covers and inspect the rocker arms, but you may have a bad main or rod bearing. im leaning toward the main bearing being spun, at least.

Posted on Mar 11, 2009

motor1258
  • 6674 Answers

SOURCE: spark plug gap for 2005 pontiac grand prix gt 3.8

.060 thousandths of an inch.

Posted on Nov 19, 2009

  • 5 Answers

SOURCE: how much to change a oil pan gasket for 2001 grand prix 3.8 gt

If you want to repair the oil pan I would also check lower engine mount for leaking oil and cracks in anti sway bar near fitting's. This due to engine mount is oil filled. OEM sway bar is made of tubular steel and they crack easy. Replacement sway bar is solid steel. Here's the kicker. When they pull the lower frame to service oil pan. The engine mount and sway bar are attached to that frame. A honest mechanic should only charge for parts ($35 for mount and $100 for sway bar) and maybe a extra hour. My mechanic did all in 5 hours. FYI gasket is only $35 bucks. Good luck

Posted on Mar 02, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How many litres of oil does a i998 grand prix 3800 take


Are you talking about engine oil? My info says 4.7L with filter change. Check the level on dipstick, when adding oil. Making sure the oil level is proper, is your responsibility.
Your owners manual may have this info.

Apr 07, 2016 | 1998 Pontiac Grand Prix

1 Answer

How to replace oil dip stick tube 2004 pontiac grand prix


those are typically pushed in there. There might be 1 bolt near the head that its holding it. Let me know if you find one. Weather has been bad here but I too have a 2004 Grand Prix and can check later

Feb 24, 2015 | 2004 Pontiac Grand Prix

1 Answer

Where do I pour transmission oil in a 2004 grand prix?


Use a funnel and poor it into the dipstick tube.

Oct 19, 2011 | 2004 Pontiac Grand Prix

1 Answer

How do you do it--alterenator replace 2006 dodge van


Hi there, you did not specify the type of engine you use so here are possible guides for varying enginge types:

2.4L Engine
To Remove:

1. Disconnect the negative battery cable.
2. Disconnect the intake air temperature sensor and remove the air cleaner assembly.
3. Remove the EVAP purge solenoid and move it out of the way.
4. Disconnect the wiring from the alternator.
5. Remove the accessory drive belt from the alternator.
6. Remove the alternator.

To Install:

1. Install the alternator.
2. Install the accessory drive belt
3. Connect the wiring to the alternator.
4. Install the EVAP purge solenoid in the bracket.
5. Install the air cleaner and duct, then connect the intake air temperature sensor.
6. Connect the negative battery cable.

3.3L & 3.8L Engines
To Remove:

1. Disconnect the negative battery cable.
2. Disconnect the wiring from the alternator.
3. Raise and safely support the vehicle.
4. Remove the right front tire and lower splash shield.
5. Remove accessory drive belt.
6. Remove the lower engine oil dipstick tube bolt, then remove the wiring harness from the dipstick tube.
7. Remove the 3 mounting bolts.
8. Lower the vehicle.
9. Remove engine oil dipstick tube.
10. Roll and carefully remove the alternator from vehicle.

To Install:

1. Place the alternator into position on the engine.
2. Install upper mounting bolts to hold the alternator in place.
3. Lubricate the o-ring with engine oil and install the dipstick tube.
4. Install the upper dipstick tube bolt.
5. Connect the wiring to the alternator.
6. Raise and safely support the vehicle.
7. Install the alternator lower mounting bolt and tighten.
8. Install the lower oil dip stick tube bolt.
9. Install the accessory drive belt.
10. Install the right front splash shield and tire.
11. Lower vehicle.
12. Install the wiring harness at the dipstick tube
13. Connect the negative battery cable.

Hope these help.

Jan 28, 2011 | 2006 Dodge Grand Caravan

1 Answer

How to remove altenator on 2006 dodge grand caravan


Removal & Installation 2.4L Engine To Remove:
  1. Disconnect the negative battery cable.
  2. Disconnect the intake air temperature sensor and remove the air cleaner assembly.
  3. Remove the EVAP purge solenoid and move it out of the way.
  4. Disconnect the wiring from the alternator.
  5. Remove the accessory drive belt from the alternator.
  6. Remove the alternator.
To Install:
  1. Install the alternator.
  2. Install the accessory drive belt
  3. Connect the wiring to the alternator.
  4. Install the EVAP purge solenoid in the bracket.
  5. Install the air cleaner and duct, then connect the intake air temperature sensor.
  6. Connect the negative battery cable.
3.3L & 3.8L Engines To Remove:
  1. Disconnect the negative battery cable.
  2. Disconnect the wiring from the alternator.
  3. Raise and safely support the vehicle.
  4. Remove the right front tire and lower splash shield.
  5. Remove accessory drive belt.
  6. Remove the lower engine oil dipstick tube bolt, then remove the wiring harness from the dipstick tube.
  7. Remove the 3 mounting bolts.
  8. Lower the vehicle.
  9. Remove engine oil dipstick tube.
  10. Roll and carefully remove the alternator from vehicle.
To Install:
  1. Place the alternator into position on the engine.
  2. Install upper mounting bolts to hold the alternator in place.
  3. Lubricate the o-ring with engine oil and install the dipstick tube.
  4. Install the upper dipstick tube bolt.
  5. Connect the wiring to the alternator.
  6. Raise and safely support the vehicle.
  7. Install the alternator lower mounting bolt and tighten.
  8. Install the lower oil dip stick tube bolt.
  9. Install the accessory drive belt.
  10. Install the right front splash shield and tire.
  11. Lower vehicle.
  12. Install the wiring harness at the dipstick tube
  13. Connect the negative battery cable.
prev.gif next.gif

Jan 16, 2011 | 2006 Dodge Grand Caravan

1 Answer

Where is my thermostat on my 1999 pontiac grand am gt


depending on the engine most are located at the lower end of the metal tube near the oil pan area

Aug 27, 2010 | 2000 Pontiac Grand Prix

2 Answers

Where is the dipstick to check the transmission fluid on a 1999 pontiac grand am 4 cyclinder engine


There should be a long diptick which reached to the bottom of the engine block, this is motor oil. The transmission dipstick is very long as well, and transmission fluid is red.

Aug 06, 2010 | 1999 Pontiac Grand Am GT

1 Answer

1999 grand prix gt it started to get really hot then the oil light started flashing the it started to knock but this only happens when it get hot can some one help me out


you have a cooling system problem the engine is getting to hot and the oils is thinnig out to much to protect the engine DO NOT keep running the car like this replace the thermostat and waterpump do a cooling system flush before you do this

Jun 29, 2010 | 1999 Pontiac Grand Prix

1 Answer

Where is the starter on a 1999 pontiac grad prix gt?


Front of engine near the radiator, next to the oil pan.

Apr 01, 2010 | 1999 Pontiac Grand Prix

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

325 people viewed this question

Ask a Question

Usually answered in minutes!

Top Pontiac Experts

yadayada
yadayada

Level 3 Expert

76649 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8518 Answers

Are you a Pontiac Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...