Question about 2006 GMC Envoy

Open Question

Rear windshield washer not working

When pushing the rear windshield wiper washer button no fluid comes out

Posted by Anonymous on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
  • 548 Answers

SOURCE: "REAR ACCESS OPEN" LIGHT ON INSTRUMENT PANEL

inside the doorway will be contact that must be clean and unobstructed to work. Check it and see if something got caught in it. Assuming it is not faullty, this should correct the problem. It is likely that the false sensing will keep the wiper from working since it shouldn't be on with the door open. If the sensor looks okay, you should have it tested to see if it is defective.

Posted on Feb 13, 2009

Ad
  • 242 Answers

SOURCE: rear windshield wiper stopped working, 4x4 dosent

sounds like a lot of fuse's blown or the fuse box it's self has a fault

Posted on Dec 24, 2009

  • 432 Answers

SOURCE: 1990 GMC Sierra 1500 pickup. Windshield wipers, Cruise Control

May want to look at replacing the wiper circuit board.It is located on the firewall adjacent to the wiper motor and has a some what square black cover with 3 torx screws and wireing harness pluged into the side.We had a truck that every time you washed it the wipers would stay on until it dryed out.You can try removing it and spaying it down with contact cleaner just watch the brease on the two contact tips.Well hope this helps.

Posted on Feb 05, 2010

  • 14036 Answers

SOURCE: 2001 GMC Yukon XL

YOU CAN GO DEALERSHIP OR THE SALVAGE YARD PROBABLY HAVE A WASHER FLUID TANK AND HOSES IN GOOD SHAPE.

Posted on Mar 23, 2010

  • 10865 Answers

SOURCE: I added fluid for the windshield wipers but the

Hello. No separate reservoir. It can be the relay,the circuit from the switch,or the pump.Most of the time it is the pump.

please rate my answer as very helpful. thanks. Joe

Posted on Apr 15, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

In my 2007 Saturn Vue there is what I think is an air pump which is cracked that one port is not connected to anything.


There is a electric motor that pumps washer fluid . Located in the bottom of the washer fluid tank .
Wash Operation (Front and Rear Wipers)
The front and rear washer systems use the same windshield washer fluid pump. When either the front or rear wiper is in the washer position voltage will be supplied to one side of the windshield washer fluid pump (depending on whether it is front or rear), while the other side of the pump is grounded.
At this point, the windshield washer fluid pump sprays solvent onto the windshield. When the front or rear washer is activated, the BCM receives an input from the switch that is activated. The BCM will control the wipers while in the WASH mode. The BCM will control either the front wiper relay or the rear wiper relay to turn on the wipers. The windshield wipers operate at low speed for 3 swipes and returns to the park position.

When turning on the washers do you hear the motor run ? Have some one try it while you listen at the washer fluid tank ! These pump motors do go bad .
turn OFF the ignition.
Disconnect the harness electrical connector of the windshield washer fluid pump.
Connect a test lamp from the windshield washer pump control circuit to a good ground .
Turn ON the ignition, with the engine OFF.
Press the front washer switch.
Does the test lamp illuminate?
YES or NO !

Nov 18, 2016 | Saturn Cars & Trucks

1 Answer

I push the wash button for the front windshield and nothing happens if I turn the wippers on they work this is on 2012 Acadia


GMC Acadia Forum: Front washer fluid not working. Help?

www.acadiaforum.net > ... > Problems, Recalls, TSBs, FAQs & Links

Dec 3, 2010 - 17 posts - ‎12 authors
I had my 2007 Acadia in for the heated washer fluid recall a few months ago. ... bad in the Midwest, I just noticed the front washer fluid not working. ..... the fuse finally seated properly and my windshield washer now works. Front Windshield Washer Spray
20 posts
Aug 26, 2012
Inoperative Rear Driver's Side Power Window
16 posts
Apr 21, 2012
Heated washer fluid
20 posts
Jan 29, 2012
Front Windshield Wiper Motor burning out??
20 posts
Feb 3, 2011
More results from www.acadiaforum.net

Nov 28, 2015 | Cars & Trucks

3 Answers

My windshield washer motor in my 2003 Hyundai Sonata does not make any noise nor dispense any windshield washer fluid when I turn it on, but the wipers do engage


Is your wiper fluid level good?Look for leaks at pump,it's connected to container,also check your hoses leaving pump to windshield,could be loose or binding.

Dec 11, 2012 | Hyundai Motor 2003 Sonata

2 Answers

My 96 Jeep GC windshield washer isn't squirting. I can hear it run when pushing the washer button and I hear fluid running ; but it doesn't spray on the windshield. Also , my wiper blade in the rear window...


your rear wiper motor might be faulty,in the front i would check your fluid level-if it is full and you hear the pump running-check your washer lines to see if they are pinched-usually around where the hood closes

Feb 17, 2010 | 1996 Jeep Grand Cherokee

1 Answer

Rear windshield washer works but front does not....Any suggestions? Washer fluid is full, fuses are good, wipers work but no fluid or sound of pump running when lever is used to spray fluid on front...


Probably need to replace the pump. Separate pumps for front and rear. Check with a test light to see if there is power to the pump. If it has power but won't work, replace the pump. If no power, you have a wiring issue. Be sure to turn the switch on and have someone push the washer button when you are checking for power. There won't be any until you push it to "wash".

Feb 01, 2010 | 2007 Toyota 4Runner

1 Answer

Windshield Washer Fluid does not come out when activated to. W/W Fluid is full and Jeep has been in garage - so not frozen. What is next to do ?


if your wipers work it is not a fuse,
if you cannot hear the pump humming when you push the wash button you will need to replace it,they are around $20.00 at Autozone

Jan 12, 2010 | 1999 Jeep Cherokee

2 Answers

Windshield wiper fluid not coming out


remove the hose from the wiper arm and see if when you push the washer button that the fluid comes out the hose,if it does the sprayer nozzel is plugged if not replace the pupm

Dec 02, 2009 | 2001 Oldsmobile Alero

1 Answer

Where is the switch for my 1997 VW Golf rear windsheild wiper? I just bought it and I can't find it...


The switch for the rear wiper is on the actual windshield wiper switch for the front wipers, you have to push the lever forward to turn it on and then again to turn it off, to use the washer fluid for the rear wiper you push the same lever forward and hold it there till the washer fluid comes out.

May 17, 2009 | 2001 Volkswagen Golf

1 Answer

Rear windshield washer motor works, but no fluid comes out


Rear washer may have it's own reservoir . Can you hear a pump humming when you activate the washer? Look in the under flooor compartment

Mar 22, 2009 | 1997 Chevrolet Suburban

Not finding what you are looking for?
2006 GMC Envoy Logo

Related Topics:

59 people viewed this question

Ask a Question

Usually answered in minutes!

Top GMC Experts

yadayada
yadayada

Level 3 Expert

76846 Answers

Freddy

Level 3 Expert

1311 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

Are you a GMC Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...