Question about 1997 Dodge Grand Caravan

1 Answer

Rear vent windows stopped working.wont open.

Won't open with switch botton.

Posted by on

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 19 Answers

If only the rear windows are inoperative, or if the windows only operate from the master control switch, check the rear window lockout switch for continuity in the unlocked position. Replace it if it doesn't have continuity. If the switch test is OK, check for a short or open in the wiring between the affected switch and the window motor. If voltage is reaching the motor, disconnect the window from the regulator and motor move window in and out check for binding. If no binding change motor. If voltage is not reaching motor check the wiring in the circuit for continuity between the switch and motor. Check that the relay is grounded properly and receiving voltage from the switches. Also check that the relay sends voltage to the motor when the switch is turned on. If not replace the relay.

Posted on Jan 11, 2009

  • Ward  Messervy
    Ward Messervy Jan 11, 2009

    For the switch continuity test here the the pins.

    Switch Position Continuity between

    Left vent open 11 and 7
    Left vent close 9 and 3
    Right vent open 9 and 1
    Right vent close 11 and 5


×

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya Mechanic can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US.
click here to Talk to a Mechanic (only for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Trunk won't open with either remote but will open with trunk button on drivers door


I would check the owners manual or with Cadillac - its possible the remotes lost part of the signal and need to be reset. It sounds like the receiver is not getting a signal from them by using that button.
Could be the receiver too.

Sep 27, 2012 | 2005 Cadillac CTS

1 Answer

My 2006 g35x won't stay locked the unlock botton


check for a short or a bad wire sounds like a bad conection check your conections

Aug 12, 2012 | Cars & Trucks

1 Answer

Garage Door Opener


there a botton inside the opener and a botton inside your garage opener push them both at same time it should link together

Dec 11, 2011 | 2002 Oldsmobile Silhouette

1 Answer

MERCEDES S320 model 1999, key locked in the Trunk.


Isn't there botton somewere on the door or left lower conner of dashboard to open trank remotely?

Jul 16, 2010 | 1999 Mercedes-Benz S-Class

1 Answer

2002 lexus es 300 trunk releast botton not working


there is a valet switch which prevents this check the glovebox or the panel that opens with the adjustment controls not sure of your model year has all this but if it does you would know where it is

Mar 23, 2009 | 2000 Lexus ES 300

1 Answer

GARAGE CONTROL SYSTEM


Try holding the hand held remote up next to the homelink (built in remote). Hold down the botton on the hand held remote and the botton you want to program in the car at the same time until the homelink light goes out. This could take 60 seconds or more. Now depending on which model garage door open and how old it is you may need to program the car to the opener. Usually this is done by pushing the botton on the back(Liftmaster,Sears, Chamberlin) or the botton on the front(Genie) and then go to the car and push the same botton on more time. I hope this helps.

Feb 05, 2009 | 2005 Honda Pilot

1 Answer

X5 -alarm system can't be activated


I press the remote control middle (BMW) botton, one time to set up the alarm, when I release the alarm, I press the one above the
BMW botton one time, this botton control driver side door too, if I want to open other three doors, I have to repress the same botton one more time.

Hope this can help .

May 17, 2008 | 2002 BMW 5 Series

Not finding what you are looking for?
1997 Dodge Grand Caravan Logo

499 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dodge Experts

yadayada
yadayada

Level 3 Expert

77514 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22306 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6927 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...