Question about 2005 Honda Civic

Open Question

On a 2004 Honda Civic I need to know how to remove the center console cover to replace a burned out bulb for the gear shift.

Posted by Anonymous on

3 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

K42282
  • 98 Answers

SOURCE: On a 2005 Honda Civic I need to know how to remove

Detach the clips (A, B) by pulling the center console box (C) up, and removing it from the center console (D).


k42282_21.jpg

  1. Remove the screws (A, B) and clips (C), and remove the center console (D).

  2. Install the console in the reverse order of removal, and note these items


k42282_22.jpg

Posted on Dec 17, 2010

jebild
  • 178 Answers

SOURCE: How to remove the center console cover on a 2005

I don't have the answer for you but you can search the web for information about adjusting the parking brake as that also requires removing the center console. I'm under the impression that interior trim removal type tools may be helpful so as to not ding things up.

Posted on Feb 05, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

2006 HONDA CIVIC GEAR SHIFT LIGHT BULB REPLACEMENT


all you have to do is pop the little square piece around the gear shift lever up and there is a wire with a tiny bulb on it. It is a pain in the butt to get all the pieces back in place and put the square piece back down. i have had to replace mine like every 6 months. be careful not to use too much force because you can break the clips that secure it in place and that will look worse than your bulb not working

Feb 03, 2013 | 2006 Honda Civic 1.8

1 Answer

I have a 2004 Honda Civic Hybrid and the light that illuminates the gear identification (letter/numbers) under the center stick shift console is not functioning. How do I replace that bulb?


Welcome to Fixya

Carefully remove the gearshift trim with a tool (screwdriver covered with tape to prevent scratching). With the trim removed (first picture) you can now see the wires to the light bulb socket. To access the socket, lift up the top of the console by inserting the screwdriver and prying. Pry at the four tabs. Note the back of the console top can be left in place. Here's the link with pictures for better understanding.
Thank you for using Fixya!

Jan 09, 2011 | 2004 Honda Civic

1 Answer

On a 2005 Honda Civic I need to know how to remove the center console cover to replace a burned out bulb for the gear shift.


Detach the clips (A, B) by pulling the center console box (C) up, and removing it from the center console (D).


k42282_21.jpg

  1. Remove the screws (A, B) and clips (C), and remove the center console (D).

  2. Install the console in the reverse order of removal, and note these items


k42282_22.jpg

Dec 17, 2010 | 2005 Honda Civic

1 Answer

How to remove the center console cover on a 2005 Honda Civic to replace the burned out bulb for the shift indicator light to work.


I don't have the answer for you but you can search the web for information about adjusting the parking brake as that also requires removing the center console. I'm under the impression that interior trim removal type tools may be helpful so as to not ding things up.

Dec 14, 2010 | 2005 Honda Civic

1 Answer

Shift indicator light not working at night, 2002 civic ex


Remove the center console covering around the gearshift, you'll find a very small bulb there, it's very common for them to burnout, change it and you'll be fine.

May 21, 2010 | 2002 Honda Civic

1 Answer

Light bulb is burned out on gear shift console. How to remover cover?


The center console needs to be removed, pull the shift plate plastic cover off, remove two bolts inside the console storage box, remove the phillips screws that are visible, the front center storage box also has to be removed, the bulb is located on the left side of the shifter from underneath.

Hope helped with this (remember rated this help) Good luck.

Nov 11, 2009 | 1995 Toyota Corolla

4 Answers

The light near my automatic gear shift won't light up, with or without the headlights on. The light for my cruise control buttons won't light up either...??


I successfully did this on my 2001 Honda Civic.

You have to remove the entire center console to get to the light. I recommend actually having the replacement bulb prior to starting. I used a Sylvania 74 that I picked up at the local auto parts store. They are tiny bulbs. About $3.

Here is a diagram I found that was very helpful in removing the center console:

07f6bbd.png

In A above, you have to work out the middle portion of the console by pulling up on it. There are tabs that hold it in place on either side of it but you can't get to them. By using my fingers and grabbing the inside of the main dish, I applied upward pressure and it came out. It did not break in the process, but I can't guarantee the result will be the same for you.

In picture B you will see that there are two screws hidden underneath the part you just removed. You need to remove those two screws plus the two tabs shown in front and the two screws located in the rear close to the floor.

You will need to put the shift into neutral or farther back to then lift out the entire console.

Once the console is removed you will see a wire going into the right side just underneath the gear shift. If you look into where it's going, you will see the back side of a small round socket. Rotate the socket about 90 degrees and it should come out. Voila! The bulb.

Simply pull the bulb out and push in a new one. Turn on the headlights to test. The bulb should be nicely lit.

Now push the socket back into where it came from and rotate back 90 degrees to lock it in place. If you reverse the rest of the instructions, putting the console back together will just take a minute or two.

Finally, write an email to Honda and tell them what you think about how easy it is to replace this lamp.

Aug 30, 2009 | 2004 Honda Civic

1 Answer

1996 accord center console


If your vehicle is an automatic, it should light up your console where the gears are marked. There's a bulb under the console. in order to get to it, you'll need to empty the console and remove the plastic piece covering the screws (very bottom of console middle) and remove the screws. Then you'll need to remove the drink holder (pops out) and remove the screws under it. Lift the rear piece of the console over the E brake, and loosen the screws to the piece with the gear indicator. You should be able to see the lamp holder and twist lock connector. If the connector hasn't just fallen out, replace the bulb and twist the connector securely back into place.

Feb 21, 2009 | 1996 Honda Accord

1 Answer

Gear shift light out in 1997 Honda


remove console and inspect for sought after malfunctioning bulbs and replace and reinstall console .

Nov 30, 2008 | 1997 Honda Accord

1 Answer

Clock bulb replacement


Sisters car has the same thing. I don't think they have a bulb to light up the clock. I'm not too sure. I might try again I had to repair the aircon switch before.

How to remove the clock.

You have to remove the center console to remove the clock. (Manual car version)

-Unscrew gear knob.
-Pull out gear shifter cover surround.
-Remove cover plate with small flat blade in little tray aft of the gear stick.
-Remove 2 screws revealed by cover.
-Remove 2 screws 1 on either side of the AFT (not middle) end of the center console.
-Remove aft half of center console.
-Remove 2 screws 1 on either side fwd of air con controls.
-Remove 1 screw underneath ash tray.
-Remove hazard switch and other switch next to clock using a flat blade to pry them out.
-Unclip switches disconnect plugs.
-Remove 2 screws revealed behind switches.
-Take your time to remove fwd console / dash trim (extra screws might be there to take out).
-Disconnect clock plug.
-Remove clock.

Let me know if there is a bulb in there

May 23, 2008 | 1998 Honda Civic

Not finding what you are looking for?
2005 Honda Civic Logo

Related Topics:

363 people viewed this question

Ask a Question

Usually answered in minutes!

Top Honda Experts

yadayada
yadayada

Level 3 Expert

75197 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7782 Answers

Are you a Honda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...