Question about Cars & Trucks
It is located near the crankshaft front pulley, remove the inner wheel well liner to see it and the tire on the passenger side.
Posted on Nov 30, 2012
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get to try the service completely Free afterwhich it costs $6 per call and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
Please don't forget to rate:
Bleeding The Brake System Bleeding When any part of the hydraulic system has been disconnected for repair or replacement, air enters the lines causing spongy pedal action (because air can be compressed and brake fluid cannot). To correct this condition, it is necessary to bleed the hydraulic system to ensure all air is purged.
Always begin bleeding the brake system from the furthest wheel cylinder or caliper from the master cylinder; the right rear.
NOTE: The right side of the vehicle is the passenger side. The sides of the vehicle are determined from the driver's perspective. This reference is taken from sitting in the driver's seat, facing forward.
Maintain a full reservoir during the bleeding operation. Never use brake fluid that has been drained from the hydraulic system, or from an open container, no matter how clean it is. Always use brake fluid from a new, sealed container. The front and rear reservoir will drain as the front or rear brakes are bled.
Posted on Jul 22, 2009
A good place to start is a ford dealer. Often they can cut you a key off the VIN number. You will have to go there in person., and some kind of proof of ownership would be needed!
Posted on Apr 02, 2010
Tips for a great answer:
Oct 25, 2017 | 2001 Ford Taurus
Mar 12, 2012 | 2001 Ford Taurus
Dec 28, 2011 | 2001 Ford Taurus
Oct 23, 2011 | 2001 Ford Taurus
Sep 13, 2011 | 2001 Ford Taurus
May 16, 2011 | 2001 Ford Taurus
May 02, 2011 | 2001 Ford Taurus
Apr 01, 2010 | 2001 Ford Taurus
You can get a .pdf version of the 2001 Ford Taurus Owner's Manual at: http://owner.ford.com/servlet/ContentServer?pagename=Owner/Page/OwnerGuidePage&year=2001&make=Ford&model=Taurus
It has instructions and guides for finding and replacing the fuses in a 2001 Ford Taurus. It starts on page 146-147.
Always use the specific Owner's Manual for the correct Model Year of a Ford or Mercury vehicle. I recently purchased a 2001 Ford Taurus, and had thought that I could use the Owner's Manual from a 1999 Mercury Sable from a friend. BUT, I figured out that each model year can be very different (before any serious damage happened.) Good luck.
May 19, 2009 | 2001 Ford Taurus
Feb 24, 2009 | 1998 Ford Taurus
70 people viewed this question
Usually answered in minutes!