Question about 1997 Dodge Grand Caravan

2 Answers

Cruise control dose not work and horn dose not work

Horn honks when you turn on alarm, but when you press hprn pad. could these two problems be one common problem?

Posted by on

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 512 Answers

Yes ..if.the clockspring is bad this can happen. contact your dealer...if its the clockspring it may be covered under a b24 recall

Posted on Jan 11, 2009

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 962 Answers

Also could be the speed sensor located on you tranny. They mess things up for the cruise control.Have your car scanned for a trouble code. Explian to them the symptoms.

Posted on Jan 11, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

2001 Suburban Horn not working


Dealers charge approximately $75-90/hr. labor. The horn pad repair, labor-wise, can easily run 2 hrs labor plus parts. Unfortunately, the horn buttons in the pad are flimsy and break easily. This could result in more repairs later. An alternative fix, if you are not fussy about appearances, is to nount an external horn button on the dash within reach of the driver. This is legal for inspection puirposes in MOST states (check local laws). You can cut into the horn wire where it comes out of the steering column, or you can ****** it at the horn relay, whichever is more accessible. The horn button can be obtained from any auto oarts store, and will be a more permanent repair. Also, no airbag worries. While working with the wiring harness, avoid any YELLOW wires. These are normally airbag wiring.

Nov 23, 2011 | Chevrolet Suburban 2500 Cars & Trucks

1 Answer

We are installing a battery in our 2000 xterra the horn starts to honk. How do we install without the horn honking


This looks like you have a alarm problem,take the keys out and replace battery,if it starts honking press alarm off.If this don't work you have to find a Nissan workshop to calibrate the alarm and computer.It might be so bad that the car wont start at all after a battery change and that,s because the car was powerless for a short while and the computer thinks its been stolen and hotwired.God luck

Dec 12, 2009 | 2004 Nissan XTerra

2 Answers

Keyless remote locks the doors but the horn doesn't honk.


Your lock settings were most probably changed from your remote unit. By pressing both lock and unlock keys together for around two to three seconds you can switch between silent mode and horn mode. Hooe that helps...

Sep 16, 2009 | 2002 Nissan Altima

5 Answers

Cruise control stopped working horn doesn't work Air bag light is on


If the air bag light is on, the horn does not sound when the pad is depressed (but does souns when you activate the alarm) and the cruise control doesn't work (but the lamp lights up when you first turn the key on), your issue is probably with the clockspring. This is a device that keeps an electrical connection between the steering wheel and the rest of the car regardless of steering wheel position.

Jul 28, 2009 | 2000 Dodge Caravan

2 Answers

Can I stop my horn from sounding when I lock my 2009 Accord


You might can have the dealer program it not to honk, but its just the way the keyless entry works. I've owned 2 accords--an 06 and 08--and both of them honk the horn when the lock button is pressed twice. Pressing the button once will secure the car and arm the alarm. So once click is all you really need. And no your alarm is not malfunctioning.

Jul 18, 2009 | 2006 Honda Accord

1 Answer

Jetta no longer makes beeping sound when locked.


try honking the horn normally with horn button <key must be on> if horn works it is in the programing for comfort and convieniance system if no honk it's just the horn or wiring to horn.

Mar 21, 2009 | 2004 Volkswagen Jetta

Not finding what you are looking for?
1997 Dodge Grand Caravan Logo

176 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dodge Experts

yadayada
yadayada

Level 3 Expert

70387 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22041 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6879 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...