Question about 2003 Cadillac CTS

Open Question

Where is the temp sensor located on a 2003 cadillac cts 3.2 engine

Posted by on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

dealt_soul
  • 296 Answers

SOURCE: 2003 cadillac cts coolant temperature sensor

I cant find a pic of the loctation.

It is under the intake in the back in the coolant bridge it is not bad to change if you are not affaid to take the intakes off but to get to it you have to take the intake off

Posted on Jan 19, 2009

  • 1 Answer

SOURCE: location of coolant temp sensor

where can locate the engine coolant temperture sensor.

Posted on Jul 29, 2009

  • 1 Answer

SOURCE: CD Mechanical Error on 2003 Cadillac CTS

take the radio apart and take them out one by one, i just fixed my yesterday

Posted on Sep 18, 2009

  • 11122 Answers

SOURCE: 2003 cadillac cts v6 3.2 liter. white smoke

u have a leak in the heater core the oily smell and mist is anti freeze sounds like a small leak because usually u would have a wet floor if it was large -two choices check and repair as necessary the core or can use an additive with a stop leak they usually work well on small leaks

Posted on Dec 14, 2009

duane_wong
  • 6826 Answers

SOURCE: i need to know how

Timing Belt & Sprockets Removal & Installation 3.2L Engine To Remove:
TDC compression stroke timing marks gm_car_cad_cts_04_tmg_mrks_tdc_comp.gif

  1. Before servicing the vehicle, refer to the precautions at the beginning of this section.
  2. Remove or disconnect the following:
    • Timing belt cover
    • Crankshaft damper
  3. Rotate the crankshaft in the engine rotation direction, clockwise using the J 42098 or other suitable tool until the # 1 cylinder is at Top Dead Center (TDC) on the compression stroke. The reference marks on the camshaft gears should be aligned with the corresponding notches on the rear timing belt cover, as well as the mark on the crankshaft sprocket and oil pump housing. Timing marks 60 degrees from TDC gm_car_cad_cts_04_tmg_mrks_60_frm_tdc_comp.gif

  4. Rotate the crankshaft counter clockwise using the J 42098 or other suitable tool until 60 degrees Before Top Dead Center (BTDC). The 60 degrees BTDC point can be identified by the index mark on the oil pump cover. Using the J 42069-10 or other suitable tool gm_car_cad_cts_04_j42069-10.gif

  5. Install the J 42069-10 or other suitable tool to the crankshaft sprocket with the knurled bolt.
  6. Rotate the crankshaft in the engine rotational direction, clockwise using the J 42098 until the lever of the J 42069-10 or other suitable tool firmly contacts the water pump pulley flange. The # 1 cylinder is at TDC at this point.
  7. Secure the moveable lever of the tool to the water pump pulley flange. Tools in cam gears gm_car_cad_cts_04_tools_in_cam_grs.gif

  8. Install the J 42069-1 and the J 42069-2 or other suitable tools to the camshaft gears. If the J 42069-1 or the J 42069-2 or other suitable tools do not fit into the teeth of the camshaft gears, it may be necessary to loosen the upper idler pulley and turn the eccentric or camshaft gears until the tool can be inserted.
  9. Loosen the timing belt tensioner nut.
  10. Loosen the upper idler pulley bolt.
  11. Remove or disconnect the following:
    • Lower idler pulley bolt
    • Lower idler pulley and spacer
    • J 42069-10 or other suitable tool from the crankshaft sprocket WARNING
      After timing belt is removed, never turn camshaft and crankshaft independently. Do not remove J 42069-1 and the J 42069-2 or other suitable tools while the belt is removed.
    • Timing belt
prev.gif next.gif

Posted on Dec 18, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

WHERE IS THE CAM SHAFT SENSOR LOCATED ON A 2003 cts cadilac


under the plastic cover and on passenger side top of engine.

Jul 05, 2012 | 2003 Cadillac CTS

1 Answer

Vapor canister 2003 cadillac cts


it will look something like this:
1_10_2012_5_20_27_pm.jpgand is usually located on the fender well on the engine side toward the front corner of the car (it may be inside the fender itself)
there would be 2-3 large vacuum hoses going to it which will help in finding it.

Dec 26, 2011 | 2003 Cadillac CTS

1 Answer

Where is the cooling fan sensor located on 1998 cadillac deville 4.6 northstar


The fans /fans are turned on by the pcm, using input from the coolant temp sensor, as well as the HVAC system. The cts is on the right rear of the engine below the egr valve.

Sep 24, 2011 | 1998 Cadillac DeVille

1 Answer

Where is the throtle position sensor on my cadillac cts


There should be 2 black intake hoses entering the top of the engine. They are about 2-3 inches in diameter. Looking at the hose the TPS should be on the left side hose right past where it connects to the engine. This is an expensive part, I hope you do not have to replace.. Good Luck.

Aug 18, 2011 | 2003 Cadillac CTS

1 Answer

Hi I own a 2003 Cadillac CTS I am getting a check engine light error light with code P0128 and my heat is fluxuating up and down I have already installed a themostat. What are my options


A code P0128 may mean that one or more of the following has happened:

1-Low engine coolant level
2-Leaking or stuck open thermostat
3-Faulty cooling fan (running too much)
4-Faulty coolant temperature (ECT) sensor
5-Faulty intake air temperature (IAT) sensor

Check coolant level
Check to make sure thermostat is functioning properly Check the Cooling fan Check the ECT sensor Check the IAT sensor If all else fails replace the thermostat

Jan 05, 2011 | 2003 Cadillac CTS

1 Answer

Location of ckp sensor low circuit 2003 cat. cts


It's on the left side of the engine toward the rear. One bolt holds it in place> its not the most easy to get to , so allow yourself some time. prob about 2hrs at the dealer.

Quinn

Jan 23, 2010 | 2003 Cadillac CTS

1 Answer

Location of coolant temperature sensor


Maybe this will help . although this is from a 1997 Caddy.


Cadillac DeVille Engine Coolant Temperature (ECT) Sensor Location62451583.gif

Nov 20, 2008 | 2004 Cadillac CTS

Not finding what you are looking for?
2003 Cadillac CTS Logo

Related Topics:

49 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cadillac Experts

yadayada
yadayada

Level 3 Expert

75077 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7768 Answers

Are you a Cadillac Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...