Question about Cars & Trucks
I need to change the fuel pump on my sons car, I know where it is, I want to know the easiest way to replace it. Also can it be removed from inside the car under the rear seat, I see the top of the pump but the inspection panel is off set to the pump and looks very tight, Or do i have to drop the petrol tank to do the work.
What vechicle type model year.
Posted on Dec 01, 2012
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get to try the service completely Free afterwhich it costs $6 per call and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
First you will need to releave fuel pressure......
next remove the rear seat cushion to gain access to fuel pump access panel.....
Removing Fuel Pump....
Posted on Jan 29, 2009
2003 Grand Am GT,You have to drop the fuel tank,remove heat shield,remove all lines,electrical plug ins,then you are ready to do straps,be sure to go get extra nut and bolts for straps (2) of them had to cut off old ones,once straps are off depending on how much gas is in the tank used jack to lower tank,fuel pump was a twist off with locking mechanisms on top of tank,used a rubber malet and screw driver to loosen,pull out after diconnecting plug ins etc,replace blue plug in for harness to fit new pump,was recommended since it could corrode,lifted tank back up connected wires,lines etc,put key in on position 3-4 times for pump to pump,car started 1st time,my first fuel pump took my son and I 2 1/2 hours,new pump $250.00 wire harness $15.00 and two new nuts and bolts $3.25
Posted on Mar 13, 2009
SOURCE: need to know if i
here are step by step instructions on the removal and installation of your fuel tank and fuel pump.
please do not forget to rate and comment about your experience with fixya today.
Removal & Installation
WARNING If the modular fuel sender assembly is retained by a snapring, it may spring up from its position. When removing the modular fuel sender from the tank, be aware that the reservoir bucket is full of fuel. It must be tipped slightly during removal to avoid damage to the float.
Install or connect the following:
NOTE Gently pull on the fuel pump reservoir to assure it is secure. If not secure, replace the entire fuel sender.
Posted on Apr 17, 2009
Tips for a great answer:
Nov 04, 2015 | 2000 Volvo S70
Feb 14, 2015 | 1995 Dodge Stealth
Oct 20, 2010 | Renault Sport Cars & Trucks
May 03, 2010 | 1998 Dodge Ram 1500 4WD
Jan 08, 2010 | 1999 Toyota RAV4
Sep 07, 2009 | 1990 Buick Century
May 24, 2009 | 1995 Dodge Ram
Apr 14, 2009 | Cadillac DeVille Cars & Trucks
Apr 11, 2009 | 1995 Chrysler LHS
Nov 18, 2017 | Cars & Trucks
55 people viewed this question
Usually answered in minutes!