Question about 2004 Jeep Grand Cherokee

Open Question

Grand cherokee 4 wheel drive not engaging

The shifter moves freely partime 4WD to fulltime 4WD and stops. It doesn't engage tho. I push knob down and it freely slides back thru neutral to 4Lo, but still doesnt engage. Basically it'll glide freely from top to bottom with a stop at mid point but will not engage.

Posted by on

  • jorge avalos Jun 14, 2013

    help, i own a 2000 jeep grand cherokee, part time engages, full time does not, what could it be?

×

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 5 Answers

SOURCE: 1999 jeep grand cherokee all time four wheel drive will not engage

Sounds like the splines on your transfer case gear are ground down

Posted on Apr 23, 2009

  • 26 Answers

SOURCE: 4x4 transimission clunks when engaged?

When engaging the 4WD system, you are pulling the lever on the Transfer Case right? Not the transmission, it's a different gearbox.
There were several versions of transfer cases that used both full and part-time 4 wheel drive.
From your description this sounds like a part-time transfer case.
Going with that, it is somewhat normal to hear and feel a mild clunk when engaging 4WD high range, especially if you are at a complete stand-still or under full throttle.
Try engaging 4WD High while slowly rolling at idle - no throttle. It should pull in fairly smoothly.
Once 4WD is engaged it will literally LOCK the front and rear axles together. So do not do it on hard dry pavement.
These older style 4WD systems need a little "give" especially when turning. The engineers assume you are not engaging 4WD unless you are in a somewhat slippery scenario.
Many CV joints, axles, U-Joints, differentials, and transfer cases are damaged and broken by folks who don't understand this.
Reading the owners manual should provide a clearer description of what you've got.
Bear in mind that when you come out of 4WD it may not completely release, again due to hard pavement binding up the axles. You can try this: backing up 10-25 feet in a straight line, or getting one set of wheels on the shoulder or in some gravel. That should allow it to release the transfer case and go back to everyday 2WD high.
I hope this helps.
:)

Posted on May 15, 2009

  • 13 Answers

SOURCE: 99 jeep grand cherokee limited, have no 4wd. fluid

If it was ever towed with the wheels on the ground (not dollied) then the transfer case is probably "burned out" and you will need to replace it. These models of jeeps are full time 4WD and MUST be dollied or towed on a carrier or rollback type truck. Unless they have manual locking hubs.

Posted on Nov 08, 2009

Testimonial: "i towed it from previous customer of mine because she blew motor. i replaced motor. i flatbedded the truk knowing its awd. "

  • 6982 Answers

SOURCE: How to shift a 1998 jeep grand cherokee into 4 wheel drive

Four low is almost never used. I use it on very steep rocky or muddy trails in the woods or to pull someone out of mud or a ditch. Though some will shift standing still it is best do do this while rolling. Four high can be shifted at low speeds of 2 to about 35mph (higher also but not really good idea) Low can only be shifted between 2 to 10mph. If you find yourself stuck and unable to shift because you aren't rolling you can also turn the engine off, engage the transfer case and re-start. That avoids having the gears clashing together. Best rule is if it begins to grind, don't force it.

Posted on Jan 31, 2010

  • 1 Answer

SOURCE: 04 jeep rubicon. my 4wd indicator light does not

has anyone found the solution to this problem?

Posted on Aug 04, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Shifter will not engage 4 wheel drive.


Check to make sure it is connected at the transfer case. The shifter bushings become worn and break and allows the linkage to fall off the lever arm.

Feb 22, 2015 | 1999 Jeep Cherokee 4WD

1 Answer

In my 2009 jeep grand Cherokee there is no 4 Ed shifter. Is pressing the "ESP" button engaging the 4wheel drive?


On the Jeep models, ESP means electronic stability program which is the same as traction control.
There are 3 different versions of four wheel drive on Jeep Grand Cherokees with the base version being all wheel drive.
Your owners manual should tell you which version you have and how it operates.

Feb 07, 2013 | 2009 Jeep Grand Cherokee

1 Answer

How do i get out of 4x4 on a 2000 jeep grand cherokee laredo


On these issue, there are few solved help links for troubleshooting the issue easily.-------

Click the link below: ---

No 4x4 light on dash?

http://repairhelpcenter.blogspot.com/2011/12/no-4x4-light-on-dash.html

-----------

4X4 Truck makes roaring noise in the front end?

http://schematicsdiagram.blogspot.com/2012/01/4x4-truck-makes-roaring-noise-in-front.html

-------------

Car will not go into 4WD high or 4WD low?


http://schematicsdiagram.blogspot.com/2011/12/car-will-not-go-into-4wd-high-or-4wd.html

--------------

No 4x4 light on dash?

http://repairhelpcenter.blogspot.com/2011/12/no-4x4-light-on-dash.html

------------

4 wheel drive system will not disengage?

http://technoanswers.blogspot.com/2012/01/4-wheel-drive-system-will-not-disengage.html

----------

4WD light is flashing and beeping? NO 4WD high?

http://schematicsdiagram.blogspot.in/2012/02/4wd-light-is-flashing-and-beeping-no.html

----------

2002 Jeep Wrangler: 4WD Idiot Light is ON?

http://technoanswers.blogspot.in/2012/06/2002-jeep-wrangler-4wd-idiot-light-is.html

----------

Traction control switch will not engage on 4WD High or Low

http://whoisbyme.blogspot.com/2012/10/traction-control-switch-will-not-engage.html

-----------

4WD light flashing and 4WD will engage after few minutes

http://repairhelpcenter.blogspot.com/2012/10/4wd-light-flashing-and-4wd-will-engage.html

------------

2008 Toyota Tundra: 4x4 Wheel Drive Light is Flashing?

http://technoanswers.blogspot.in/2012/05/2008-toyota-tundra-4x4-wheel-drive.html

----------

4x4 front differential will not engage the axle on ford?

http://technoanswers.blogspot.in/2012/02/4x4-front-differential-will-not-engage.html

-------

4x4 will not engage on Ford F150?

http://technoanswers.blogspot.in/2012/02/4x4-will-not-engage-on-ford-f150.html

-------------

Dodge Ram 4x4 light keeps flashing

4X4 LOW LIGHT IS FLASHING ON DASH

http://technoanswers.blogspot.in/2012/09/dodge-ram-4x4-light-keeps-flashing.html

----------

Ford 4x4 front wheels will not engage?

http://technoanswers.blogspot.in/2012/02/ford-4x4-front-wheels-will-not-engage.html

-------------

These details will help.

Thanks.

Dec 26, 2012 | 2000 Jeep Grand Cherokee

1 Answer

Will not shift into 4wheel drive


On these issue,there are few solved help links for troubleshooting the issue easily.-------

Click the link below:---
No 4x4 light on dash?

http://repairhelpcenter.blogspot.com/2011/12/no-4x4-light-on-dash.html

-----------
4X4 Truck makes roaring noise in the front end?

http://schematicsdiagram.blogspot.com/2012/01/4x4-truck-makes-roaring-noise-in-front.html

-------------
Car will not go into 4WD high or 4WD low?


http://schematicsdiagram.blogspot.com/2011/12/car-will-not-go-into-4wd-high-or-4wd.html

--------------
No 4x4 light on dash?

http://repairhelpcenter.blogspot.com/2011/12/no-4x4-light-on-dash.html

------------
4 wheel drive system will not disengage?

http://technoanswers.blogspot.com/2012/01/4-wheel-drive-system-will-not-disengage.html

----------
4WD light is flashing and beeping? NO 4WD high?

http://schematicsdiagram.blogspot.in/2012/02/4wd-light-is-flashing-and-beeping-no.html

----------
2002 Jeep Wrangler: 4WD Idiot Light is ON?

http://technoanswers.blogspot.in/2012/06/2002-jeep-wrangler-4wd-idiot-light-is.html

----------

Traction control switch will not engage on 4WD High or Low

http://whoisbyme.blogspot.com/2012/10/traction-control-switch-will-not-engage.html

-----------

4WD light flashing and 4WD will engage after few minutes

http://repairhelpcenter.blogspot.com/2012/10/4wd-light-flashing-and-4wd-will-engage.html

------------
2008 Toyota Tundra: 4x4 Wheel Drive Light is Flashing?

http://technoanswers.blogspot.in/2012/05/2008-toyota-tundra-4x4-wheel-drive.html

----------
4x4 front differential will not engage the axle on ford?

http://technoanswers.blogspot.in/2012/02/4x4-front-differential-will-not-engage.html

-------
4x4 will not engage on Ford F150? http://technoanswers.blogspot.in/2012/02/4x4-will-not-engage-on-ford-f150.html

-------------
Dodge Ram 4x4 light keeps flashing 4X4 LOW LIGHT IS FLASHING ON DASH

http://technoanswers.blogspot.in/2012/09/dodge-ram-4x4-light-keeps-flashing.html

----------
Ford 4x4 front wheels will not engage?

http://technoanswers.blogspot.in/2012/02/ford-4x4-front-wheels-will-not-engage.html

-------------

These details will help.

Thanks.

Nov 25, 2012 | 1996 Jeep Grand Cherokee

1 Answer

I have 1997 Jeep Grand Cherokee V8 limited. There are different 4WD modes available. I was wondering which 4WD mode is the most fuel efficient and how do you engage the different 4WD modes?


4 wd part time is the most fuel efficient becuase it only engages when the tires start to spin. to engage the different 4wd modes pull up on the lever next to the shifter and you'll feel it engage into to its respected modes. recommended you engage the 4wd while moving slowly except for 4wd low full time which you need to put the shifter into neutral before you can engage it. remember 4 wd low full time is needed when none of the other modes work.

Jan 16, 2011 | 1997 Jeep Grand Cherokee

1 Answer

How does the four wheel drive on my jeep work or lock in?


If you have a CJ or Cherokee, when you move the 4x4 lever, it engages the transfer case which then transmits power to the front as well as the rear wheels. For most (99%) of all four wheel use, you use the front position on the shifter one notch behind the two wheel drive setting. Use 4 low only for pulling vehicles out of mud etc and don't drive in that range. If it sticks in 4wd after disengaging it, usually backing up about twenty feet will help.
If you have a Grand Cherokee, the 4x4 usually is a quadratrack unit. That one stays engaged but only goes into 4wd mode when the rear wheels begin to slip. (by itself). Rules for using low are the same.
It is very important to run the exact same size and style tires on any 4x4. It is mandatory on quadratrack units. Use of odd sized tires can cause driveline damage.
There are variations on different year vehicles but the basics remain the same.

Sep 01, 2010 | Jeep Cherokee Cars & Trucks

1 Answer

When i engage four wheel drive from the lever in the car i only get traction on the rear wheels. Is there a diff lock i need to engage


It depends, look at the hubs on your front wheels? Is there a knob in the center of the wheels? If so, then turn this knob to the right and you will have engaged the 4 wheel drive? If you do this, however, make sure you engage the 4 wheel drive inside the truck (if your truck has a 4 wheel drive gear shifter).
Oh other Rangers you have a knob on the inside of the cab it should be somewhere on the dash. You can turn it to the right and this will engage the 4 wheel drive.
Finally, when you engage the 4WD make sure the engine is cut off so it doesn't mess up your transfer case.

Jan 08, 2010 | 2000 Kia Sportage

1 Answer

Just bought my son a 93 jeep grand cherokee cant get it to run in 2wd we have 4wd all time & 4wd low on the shift.when we put in nutral & put the auto in drive the wheels dont spin dont have a...


Neutral is only used when you need to tow the jeep. Normal two wheel driving is done in 2h. To engage 4wheel drive keep rolling slowly and engage either 4h or 4L. Generally 4L is almost never used as it is for pulling weight like a vehicle stuck in a snowbank. If it does not return to 2h when you go back into two wheel operation, many times it will if you back up about ten or twenty feet. Don't engage 4 wheel drive while standing still. and never force the lever if you hear grinding.

Sep 23, 2009 | 1993 Jeep Grand Cherokee

Not finding what you are looking for?
2004 Jeep Grand Cherokee Logo

Related Topics:

258 people viewed this question

Ask a Question

Usually answered in minutes!

Top Jeep Experts

yadayada
yadayada

Level 3 Expert

75197 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7782 Answers

Are you a Jeep Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...