Question about 2001 Dodge Durango

Open Question

P0301 cylinder 1 misfire detected - 2001 Dodge Durango

Posted by Anonymous on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya Mechanic can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US.
click here to Talk to a Mechanic (only for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
Molson02536
  • 3854 Answers

SOURCE: code 301, random or cylinder 1 misfire

Spake pluge could have gone bad, or the Spark Plug wire. Try changing all your plugs and wire and inspect the old one's. The wire could be bad do to time or may have been against the exhaust manifold and brunt. Good luck

Posted on Apr 08, 2009

Ad
Bat1956
  • 585 Answers

SOURCE: cylinder 1 misfire

If it smooths out at wide open throttle it's probably not the injector but rather a substantial vacuum leak at that cylinder.

Posted on May 06, 2009

motor1258
  • 6674 Answers

SOURCE: truck has no power

I'd start with a fuel pressure test.

Posted on May 26, 2009

  • 4 Answers

SOURCE: 1996 dodge dakota v6 4v4 check engine

I could be wrong but it sounds like you need to put some attention towards the cat and the O2 sensors.

Posted on Mar 18, 2010

  • 14585 Answers

SOURCE: auto question,I have an 96 Dodge Ram w/ 5.2L V8

I would check the injector. Pull the plug and check for corrosion. Use on ohm meter to check the injector. The resistance should be 11 to 15 ohms. Check it against another injector. they should be close. You can also check the injector plug. best to use is a noid light, but you can use the meter. set it to dc volts to check. the numbers should jump everytime it fires. since you got a 300 and 301 misfire it tells me that you have an intermitant misfire in cylinder 1. The other sensors are still good don't replace them. The coil is still good, because when it starts to go, it will have misfires on all cylinders or will not work at all. The crank sensor is the one that detects the misfire, again don't replace it because it's not bad, it's just doing it's job. If the injector and harness check out good then I would start check the cylinder for compression and mechanical problems

Posted on Nov 24, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I would like to know what these codes mean


P0171 System Too Lean (Bank 1)
P0174 System Too Lean (Bank 2)
P0301 Cylinder #1 Misfire Detected
P0302 Cylinder #2 Misfire Detected
P0304 Cylinder #4 Misfire Detected
P0306 Cylinder #6 Misfire Detected

Mar 12, 2014 | 1999 Ford Explorer

1 Answer

Codes:p1346/p1349/p1354/p0446/p0300/p0301/p0303/p0305/p0307/ p0430/car runs rough when idling/lexus gs 400 1998


P0301 Cylinder No. 1 Misfire Detected
P0302 Cylinder No. 2 Misfire Detected
P0303 Cylinder No. 3 Misfire Detected
P0304 Cylinder No. 4 Misfire Detected
P0305 Cylinder No. 5 Misfire Detected
P0306 Cylinder No. 6 Misfire Detected
P1346 Variable Valve Timing (VVT) Circuit Range/Performance Fault
P1349 Variable Valve Timing (VVT) System Malfunction
P0330 Knock Sensor
P0446 EVAP Vent Control Fault
P0430 Catalyst System

Stop driving immediately.....

You defiantly skipped on your timing........

Feb 14, 2011 | 1998 Lexus Gs 400

3 Answers

CODES-PO301-PO303-PO316- CHANGED PLUGS & WIRES. STILL MISS ON START UP, GOES AWAY MOST OF THE TIME ABOVE 1000 R.P.M


P0301 - Cylinder 1 Misfire Detected.

Causes:
- Improper spark plug at cylinder #1
- Insufficient compression at cylinder #1
- Incorrect fuel pressure
- The injector circuit is open or shorted at cylinder #1
- Fuel injector #1 may be faulty
- Intake air leak

Solutions:
- Perform Injector Service
- Replaced Spark Plug #1
- Replaced Injector #1
- Replaced Ignition Coil #1

P0303 - Cylinder 3 Misfire Detected.
Follow info from P0301.

P0316 - Misfire Occurred In The First 1,000 Engine Revolutions.

Causes:
- Damaged CKP sensor.
- Ignition System.
- Fuel Injectors
- Running out of fuel
- Fuel Quality
- Base engine
- Damaged Powertrain Control Module

Solutions:
Usually the P0316 is combine with a P03XX codes. The P03XX code indicates in which cylinder the misfire occurred.

Jan 17, 2011 | 2002 Mercury Sable

3 Answers

I have a 05 VW Pessat with a 1.8L 65K miles on it. I have a random misfire and surge at idle. Code's set: P0300, P0301, P0302 and I seen P0303. This misfire comes and goes. Does not have a dead miss. I...


Try the crank pisition sensor that is vary likely to be the couse of your misfires its working but its intermintly shorting out telling the pcm that you have a misfire and setting the codes

Nov 22, 2010 | 2004 Volkswagen Passat

2 Answers

Code p0301 and p0316


P0301 - Cylinder 1 Misfire Detected
P0316* - Engine misfire detected on Startup (First 1000 Revolutions) Could be a Bad Coil or bad spark plug or a bad wire on cylinder one. Check the plug and the wire first then move to the coil. Good Luck.

Sep 23, 2010 | 2002 Ford Explorer Sport Trac

2 Answers

2000 honda crv p1399 and p0301 check engine codes


Code P1399 is specific to Honda - it is an error code for "multiple variable misfires detected". P0301-P0304 are common OBDC codes for all cars, specifically "misfire in cylinder X".

You will get the P0301-P0304 codes on your OBDC reader when you plug it in (if actually errors), but will only find the P1399 if you select Honda as the manufacturer.

Just got these errors today on my CRV 2000. Now I have to figure out what is causing two of the cylinders to misfire.

Mar 08, 2010 | 2000 Honda CR-V

2 Answers

Obd codes p0300 p0301 p0303 p0305 p0401


P0401 Exhaust Gas Recirculation Insufficient Flow Detected

P0300 Random/Multiple Cylinder Misfire Detected
P0301 Cylinder 1 Misfire Detected
P0303 Cylinder 3 Misfire Detected
P0305 Cylinder 5 Misfire Detected


I would check out the EGR valve. That maybe what is causing all the misfires.

Mar 24, 2009 | 1997 Toyota Camry

1 Answer

I am workiing on a 1999 toyota carolla has a misfire


Here is a good site for OBD II trouble codes.  P0300: Random/Multiple Cylinder Misfires Detected, P0301: Cylinder 1 Misfire Detected, P0304: Cylinder 4 Misfire Detected.

Jan 25, 2009 | 1999 Toyota Camry

Not finding what you are looking for?
2001 Dodge Durango Logo

Related Topics:

65 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dodge Experts

yadayada
yadayada

Level 3 Expert

77169 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22258 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6927 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...