Question about Cars & Trucks

1 Answer

My 1997 tf magna suddenly started making this annoying grindy type noise. Any idea what it could be? It only happend when im driving. Not when parked. And only happens between 2000 rpm and 3000 rpm :

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Cars & Trucks Master
  • 5,370 Answers

There are many possibilities that can cause car to make noise.
It's actually from where the noise is coming from. Front end or rear end. From engine area or from inside the steering or from brakes.

There is N-number of possibilities for the car to make grinding noise or any other kind of noise.

---------
For step by step troubleshooting this problem, I suggest you to refer the help links mentioned below. Its a complete solution with proper explanation to identify the cause of problem: ------


Click the link below: -----

CAR NOISE ISSUES
http://alltypesofpartsreplacing.blogspot.com/2012/11/car-noisesnoisy-cargrinding.html
------------These will help.Thanks.

Posted on Nov 30, 2012

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 48 Answers

SOURCE: 1997 dodge intrepid making noise

what area of the car does it come from? it could be any of the engine pulleys and hopefully not but could be the rods knocking inside the engine

Posted on Jun 21, 2008

nandosnut
  • 112 Answers

SOURCE: Mazda 6 gt 2005 will not start after stalling

Have the car exorcised at once!

Seriously, it sounds to me like you've managed to dislodge something while doing your audio work - or even inadvertently left behind a small tool; there, it could roll onto components and short across several components/gauges. I think you should carefully retrace your work and make sure nothing was dislodged or left behind!

Good luck; let me know how you get on!

Posted on Apr 28, 2009

heavymetal77
  • 721 Answers

SOURCE: Car: Nissan Maxima SE 1997 tachometer broken

the dash voltage egulator probably went bad. First,check the battery & make sure you have 12 volts,not running. Check it again running & you should see about 14.5 volts. If that's good,I'd replace the guage assembly.

Posted on Jun 28, 2009

  • 1810 Answers

SOURCE: 2000 Nissan Maxima Noise

sounds like a ride controll compressor if your car has air ride controll it will have a compressor
check the fan for bad blades and chips also check the fan housing for missing hold downs and screws also for clearences and if loose or out of mounts

Posted on Jan 23, 2010

Testimonial: "Oh okay I bought a new fan assembly because the old fans where bad. I think that was it. Thanks so much !!"

  • 462 Answers

SOURCE: Suddenly died while driving. Turns over but won't

Agreed with yogegoy,
Old days are gone , on diagnostics without scaner you have small chances to find the problem .
But you can check basics - Spark(you said it's ok) , timing(timing belt can jump a tooth or two), fuel delivery (disconnect fuel hose and crank the engine, if flow is strong - ok) .
Also I think on those cars throttle is electronicly controled unit , so it needs adaptation after replacement with apropriate tool (scaner).

Posted on Jul 15, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

1997 MAGNA EXECUTIVE TF 4 CYLINDER OR 6 CYLINDER


both types ones a 2.4 and there are 2 variant V6
2.4-Litre "4G64"I4
3.0-Litre "6G72"V6
3.5-Litre "6G74"V6


Sep 26, 2014 | 1997 Mitsubishi Magna

1 Answer

Grindy noise turning car


Sounds like you have faulty CV joints. Take it to a mechanic who can check it out for you.

Sep 02, 2014 | 2012 Chevrolet Chevrolet Impala LT

1 Answer

Mitsubishi wont start


have motor/engine starter unit checked, probably broken/lose gear, hence the woo noise and fails to start.

Mar 22, 2014 | 1997 Mitsubishi Magna

1 Answer

I got check lite in my mitsubhishi magna exec. n sometimes it never goes off ... even the spark is there , all fuses are ok battery is ok fuel pump is new but still not get off some time whats the sol


Hi Josh, The engine check light can come on for a number of different reasons and will not always mean the vehicle comes to a stand still immediately. My advise is tohave a scan carried out to find out why it has come on, and then have it attended to before you're forced to take the long walk home. Regards John

Mar 31, 2012 | 1997 Mitsubishi Magna

1 Answer

I need a diagram of the front hub assembley for a TF maga


Most likely(99%) you have pressed in bearing in to the hub, sience it's front wheel drive car.

May 03, 2010 | 1996 Mitsubishi Eclipse

1 Answer

Need to change starter motor on a magna exec but cant find it


Need to fix starter motor on a magna TF executive but cant find it could you tell us where it would be located

May 10, 2009 | Mitsubishi Lancer Cars & Trucks

1 Answer

1997 dodge intrepid making noise


what area of the car does it come from? it could be any of the engine pulleys and hopefully not but could be the rods knocking inside the engine

Jun 21, 2008 | 1997 Dodge Intrepid

1 Answer

Steering noise and vibration


Noises are kind of difficult to diagnos if you don't hear them firsthand. That said, the thing I would be looking at is the strut bearing. It is circular like a lazy susan and what happens on cars over 75,000 miles is dirt can accumulate in the bearings and it can cause a grinding or popping because it resists turning and when it does the spring is suddenly turned and that sets up the noise.

If that is the problem I would recommend replaceing both sides and then you will need to get the alignment done. Let me know if I can be anymore help

Jun 10, 2008 | 1997 Cadillac DeVille

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

56 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

yadayada
yadayada

Level 3 Expert

75197 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...