Question about Cars & Trucks
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
Look at your speed control deactivation switch.It should be near your master cylinder. check to see if it's leaking. I think you have a recall 05s28 for the switch if its leaking. If it's not leaking,jump the two pin connector with a wire making sure not to ground it out. Drive it and try the cruise. If it works thats your problem.Good luck.
Posted on Jul 09, 2009
SOURCE: 05 Ford Explorer Transmission
on the bottom of the transmission pan you will find a nut with a hex or torx in the middle you remove the center plug when the truck is hot and running on a level serface the trans fluod will dribble out if it does not dribble out it is low if it runs out fast a steedy streem it is over full now their is a part that screws into this for a fill if you remove the pan you will see how it works the pan has a pipe/ stack that when full of fluid the top of the pipe is at the full point if you remove the large nut the stack and plug will come out the best way to change the trans fluid is take it to some place that has a fluid exchange equment this will get all the fluid out including the torque converter
Posted on Dec 27, 2009
Tips for a great answer:
Jun 17, 2010 | 1985 Ford Econoline
Apr 06, 2010 | 1998 Ford Econoline
Mar 18, 2010 | 1995 Ford Econoline
Nov 28, 2009 | 2006 Ford Econoline Cutaway
Jun 26, 2009 | 1985 Ford Econoline
Apr 07, 2009 | 1996 Ford Econoline
39 people viewed this question
Usually answered in minutes!