Question about Volkswagen Polo

Open Question

Spark plugs cross treaded nct high on idle - Polo Volkswagen Cars & Trucks

Posted by on

Ad

3 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya Mechanic can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US.
click here to Talk to a Mechanic (only for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
alicantecoli
  • 22265 Answers

SOURCE: My 2001 vw passat 1.6 petrol failed nct. Emissions

change the O2 sensors and if that doesnt work then its a new cat ,you can test the sensors first if you have a automotive test meter though its easy with the right gear ,the two wires with the same colour should read 12v heater circuit and the other two should read a variation from 8v to 12v depending on engine speed

Posted on Aug 17, 2011

Ad
  • 5 Answers

SOURCE: idling high

check your throttle body for sludge contamination. it is oil deposits that sit around your throttle plate and also get into the ISC valve. Ford has had problems with this for years. you can clean it up with mild degreaser and an old toothbrush and some elbow grease.

Posted on Oct 03, 2012

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Have a gmc vandrura 1994 had a oil change and tune done to it yet it started vibration on idle and on gear and has a rough idle and when I start it up its load and a smal vibration comes and goes idk what...


If it wasn't acting up before the tune-up, one of the spark plugs may have something across the gap, or the gap is incorrect.
Also if more than one spark plug wire was removed at a time it is likely that 2 spark plug wires got crossed, (connected to the wrong spark plug).

Mar 15, 2014 | Cars & Trucks

1 Answer

My 98 montero shakes when i come to a stop and the idle is not steady


check the firing order as you may have crossed wires . check that the HT leads are not touching each other as this will also cause you problem by causing misfiring

Jan 30, 2014 | 1998 Mitsubishi Montero Sport

1 Answer

Just got the spark plugs changed and it started idling low and puting?


sounds like a wire is crossed, not making good contact, or plugs are gapped wrong...check all your wire connections..did this help?

Feb 14, 2012 | 2000 Oldsmobile Alero

1 Answer

Changed spark plugs and wires. Now at a stop the vehicle conks out while in drive


Is the engine running VERY smooth at an idle? if it is not , and I suspect it isn't, then you crossed 2 spark plug wires.

Nov 10, 2011 | 1998 Cadillac DeVille

1 Answer

My 2001 vw passat 1.6 petrol failed nct. Emissions low idle and high idle too high


change the O2 sensors and if that doesnt work then its a new cat ,you can test the sensors first if you have a automotive test meter though its easy with the right gear ,the two wires with the same colour should read 12v heater circuit and the other two should read a variation from 8v to 12v depending on engine speed

Aug 17, 2011 | 2001 Volkswagen Passat

2 Answers

How to remove spark plugs?


You need a special 1/4 inch drive deep well socket that is the proper size, a 1/4 extension and a 1/4 drive handle. The helpful guy or gal at the counter at your auto parts store can tell you the size when you get your plugs. Righter-tightly --- lefty-loosey. Be careful to not cross thread the plugs. One ruined hole will wipe out any savings you may otherwise hope to realize.

Tanks for your question @ FixYa.com

Apr 15, 2011 | 2004 Dodge Ram 1500

1 Answer

Rough idle- code reader - multiple misfires after replacing- plugs - spark plug wires- rotor -distributor cap- filters


do u hav the wires on the rite plugs-crosses are common--are plugs gapped rite--get a haynes manual for problems--dirty idle valve questionable

Dec 15, 2010 | 1998 GMC Jimmy

1 Answer

Not getting any gas, high idle, no throttle, stalls when stopped.


When were the plugs and spark plug wires replaced last? My s-10 was getting cross firing and ran really poorly and it was all in the wires.

Mar 27, 2010 | 1993 Chevrolet S-10 Blazer

1 Answer

I need to know how to install spark plugs on a 2004 dodge durango


3.7L and 4.7L engine have ignition coil for each cylinder. You need to remove the resonator from the throttle body. Now one a time disconnect electrical connector from the coil. With a 10mm socket remove the bolt, now remove the coil , (it will be really tight). You will need different lenght extenions to reach the spark plugs. When installing new plugs use piece of hose to start plugs (so not to cross tread the hole)

Oct 22, 2009 | 1998 Dodge Durango

1 Answer

I can't get a spark plug reinstalled in my '95 Mazda B2300 2WD


you can put a little bit of oil on the treads to get it started. Do not cross tread it because it will strip the hole out and you will have to replace everything.

May 18, 2009 | Mazda B2300 Cars & Trucks

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

32 people viewed this question

Ask a Question

Usually answered in minutes!

Top Volkswagen Experts

Colin Stickland
Colin Stickland

Level 3 Expert

22265 Answers

yadayada
yadayada

Level 3 Expert

77169 Answers

Jeffrey Turcotte
Jeffrey Turcotte

Level 3 Expert

8732 Answers

Are you a Volkswagen Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...