Question about 2004 Chrysler Sebring

Open Question

Noisy lifters chrysler sebring - 2004 Chrysler Sebring

Posted by Anonymous on

Ad

3 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
  • 3600 Answers

SOURCE: How do I fix the lifters on my 2000 chrysler

You need to change the cam as well and you will need to check each lifter to see if you need to change the rocker assembly. If the rocker Assembly is worn out that may be your only problem. The lifters if they leaked would rattle if they leaked down but after warming up would stop, however if they rattle all the time it could be just the rocker assembly worn out but would need to know which engine is in it as there are 4 listed for that unit.

Posted on Mar 23, 2010

Ad
johntunney
  • 887 Answers

SOURCE: 1993 chrysler sebring lifter replacement cost

depends on where you bring it. if a lifter broke then your valve could be damaged to and then you need to redo head and gaskets. if no damage your looking at around 500 avg

Posted on Mar 18, 2013

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I need the cam shaft torque pattern for a 2005 chrysler sebring 2.7


Here's a link to the camshaft Wendy,join their site,it's free,then you can use their repair guides like me. Repair Guides Engine Mechanical Components Camshaft Bearings Lifters...

Oct 15, 2014 | 2005 Chrysler Sebring Sedan

1 Answer

Ticking in engine


ticking noise from an engine is more than likely the rockers under the valve cover. after a long period of time, the lifters and the push rods wear and cause fatigue in the metal and also the lifters can also start sticking from ling usage and dry oil getting stuck inside them

Apr 06, 2014 | 2004 Chrysler Sebring

1 Answer

Why are the lifters getting louder and intermittent sputter.


There are several reasons for noisy lifters. They could be starved for oil due to low oil pressure or dirt in the engine.
When the lifters are noisy they are not opening the valves completely, which can cause the engine to run rough.

May 11, 2013 | 1999 Chrysler Sebring LXi

1 Answer

1993 chrysler sebring lifter replacement cost


depends on where you bring it. if a lifter broke then your valve could be damaged to and then you need to redo head and gaskets. if no damage your looking at around 500 avg

Mar 18, 2013 | 2004 Chrysler Sebring

1 Answer

When should I change my timing chain or belt on a 1997 sebring xji


change timing chain when noisy and belt around 100.000klm. To do a proper job consider changing cam and crank oil seals. hydraulic belt tensioner and all idler pulleys as oil is the biggest killer of timing belts and idlers work just as hard as the belt

Jan 26, 2013 | 1997 Chrysler Sebring

1 Answer

Engine noise on chrysler concord 2000 2.7 v6 what is cause?


please be more specific describe the noise if possible post a video it could be anything from a noisy belt lifters ticking or a pulling going bad or worse a rod knocking

Jan 25, 2013 | Chrysler Concorde Cars & Trucks

1 Answer

After doing a head gasket repair 2001 Chrysler Sebring 2.7 v6 won't start. It makes a noise like growling but does not turn over. My mechanic is saying we may need to rebuild bottom half but makes no...


You say that it does not turn over, how would you know there's no compression if it don't turn over, unless you mean if won't start up, lets go with it won't start up, if you have no compression, did you bleed down the lifter's, if you did not, with the lifter pump up will hold the valves open and you will not have compression, will be very hard to start engine, remove lifter and bleed them down, also make sure you replace the oil just in case there's water in the oil pan when heads were removed, if there is water could lock engne, now you would need to overhaul lower engine, hope this was very helpful.

Oct 10, 2011 | 2001 Chrysler Sebring

1 Answer

My engine on my 1999 chrysler sebring 2.5l is making a ticking sound or so. I was told that might need to be replace. I just want to know more about this. Is this hard job to do and expensive? What is a...


It is most likely your lifters need to be adjusted. It is part of scheduled maintenance. I think at around 100,000 miles or so. It will probably cost a couple hundred dollars.

Sep 17, 2011 | 1999 Chrysler Sebring

1 Answer

How do I fix the lifters on my 2000 chrysler sebring lxi? Do I have to do anything special with them or just go buy them from autozone and replace them?


You need to change the cam as well and you will need to check each lifter to see if you need to change the rocker assembly. If the rocker Assembly is worn out that may be your only problem. The lifters if they leaked would rattle if they leaked down but after warming up would stop, however if they rattle all the time it could be just the rocker assembly worn out but would need to know which engine is in it as there are 4 listed for that unit.

Mar 23, 2010 | 2000 Chrysler Sebring

Not finding what you are looking for?
2004 Chrysler Sebring Logo

Related Topics:

122 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chrysler Experts

yadayada
yadayada

Level 3 Expert

76846 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

Jeffrey Turcotte
Jeffrey Turcotte

Level 3 Expert

8567 Answers

Are you a Chrysler Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...