Question about 2005 Scion xB

Open Question

Low beam headlights won't come on 2005 xb

Head lights go off and you have to hold headlight switch to get the lights to come on

Posted by Anonymous on

5 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 2 Answers

SOURCE: HEADLIGHT REPLACEMENT

needed: flathead screwdriver. 10mm socket and wrench, and about 15minutes


You remove the three clips on the grill with a flathead screwdriver. then just pull straight up on the grill to remove. This will expose the bolts for removal of your front bumper. there are also screws on either side of the wheelwell where the bumper meets the fender....all of these are 10mm... then pull out one side of the bumper and the whole thing will come off easily. Also if you have the factory foglights you will need to remove the harnesses from the lights before removing the bumper.....Once the bumper is off the 4 bolts for the headlight are right there for you to see....one under the grillside one one the fender side and 2 on top all of which are 10mm as well....once the headlight is out remove the wiring harnesses and reinstall the new light in exctly the same way but reversed....hope this helps

Posted on Mar 07, 2009

yankstorm02
  • 145 Answers

SOURCE: 2004 scion xb bulb stuck

There is a black locking ring holding the bulb in. After disconnecting the electrical connector turn the lock ring approx. 45-90 degrees counter clockwise, remove the lock ring then pull out the bulb.

Posted on Oct 01, 2009

Testimonial: "provided me with a very quick response and insight on the problem."

  • 69 Answers

SOURCE: Need to change low beam light on 2005 scion tc

Don't remove headlight. Look at the back of the headlight. and try to see a clip which will be holding the lampholder which holds the bulb. When you find this it will become possible but needing dexterity

Posted on Mar 27, 2010

SOURCE: I have an 09 scion xb. When I turn my headlights

Tlhat circuit is directly hooked to your tail lights.. its sort of a warning for you to realize your tail lights are out. Not your brake lights but your tail lights... It could be the bulbs out or the switch or a wire shorted out.

Posted on Jul 10, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Headlights wont work on dim, only bright


Check your head light bulbs, your truck has the dual filiment headlight bulbs one per side which does both high beam and low beam, 9007 bulbs.
If the low beam filiments are burned out only the high beam will work.
Also look into finding out if the headlight switch is gone bad.
The headlight module and or drl module maybe defective.

Jan 24, 2014 | 1996 Ford Ranger SuperCab

2 Answers

Headlight switch turns on parking lights but not headlights. Have to hold high beam switch on to have headlights at night.


Replace light switch assembly. Remenber some switches pull up to flash headlights and press down to change from low to high--press down again goes from high to low.

Apr 25, 2013 | 1993 Mercury Topaz

1 Answer

1996 dodge Ram 1500 4x4 headlights dont work.All other lights work. Headlight lamps are all good. Could it be the switch or the multifunction switch? High beam works when I pull on the directional le


The headlight switch gets power for the headlights from a 50amp fuse.
The fuse powers the headlight switch then the dimmer switch breaks for high and low beams. So if the high beams work, the problem may be with the dimmer switch.
The dimmer switch is made into the turn signal switch on the column. You would need to check the low and high beam circuits at the switch for power.

Jan 14, 2013 | Dodge Pickup Cars & Trucks

2 Answers

Where is the headlight relay in the 1998 jimmy? Low beams won't come onat night everything else does. high beams work


There is a headlight relay in the engine compartment fuse box, but its after the headlight switch and before the dimmer switch, so it powers both high and low beam circuits.
I would check the dimmer switch.

Dec 12, 2012 | 1998 GMC Jimmy

1 Answer

2006 Hyundai Tycson GL Headlight Problems


Could be a defective headlight relay, Located in the fuse block in engine compartment,

Nov 29, 2012 | Cars & Trucks

1 Answer

Lights will not turn on


HEADLIGHTS NOT WORKING


It can be faulty headlight switch or issue with its wiring. Or its faulty head light fuse.


==========

To troubleshoot the issue i suggest you few help links with appropriate solution. So you can follow the test and confirm what exact problem is there in your case of headlights not working:-----

Click the link below: -----


All headlights not working?

http://repairhelpcenter.blogspot.com/2012/01/all-headlights-not-working.html

----------

Working of Headlight switch?
------------
Both headlight bulbs blow together?

------------
Car headlight bulbs don't last long?

---------------

2007 Dodge Caliber: Low Beam Headlight Not working

http://technoanswers.blogspot.in/2012/06/2007-dodge-caliber-low-beam-headlight.html

----------

2003 Toyota Camry: Headlights Work Intermittently?

http://technoanswers.blogspot.in/2012/04/2003-toyota-camry-headlights-work.html

----------

Chevy Tahoe: Low Beam Lamps are not working?

http://technoanswers.blogspot.in/2012/04/chevy-tahoe-low-beam-lamps-are-not.html

----------

2001 Chevrolet Tahoe: Headlights not coming ON?

http://technoanswers.blogspot.in/2012/04/2001-chevrolet-tahoe-headlights-not.html

--------

2004 Dodge Ram: High Beam Light is DIM?

http://technoanswers.blogspot.in/2012/04/2004-dodge-ram-high-beam-light-is-dim.html

----------

2001 Chevrolet Tahoe: Both Low Beam Lamps Not Working?

http://technoanswers.blogspot.in/2012/04/2001-chevrolet-tahoe-both-low-beam.html

------------

Low beam headlights Modification?

http://schematicsdiagram.blogspot.in/2012/04/low-beam-headlights-modification.html

---------
How to Replace a Headlight

http://schematicsdiagram.blogspot.com/2011/08/how-to-replace-headlight.html

------------
How to Replace a Headlight Bulb


http://schematicsdiagram.blogspot.com/2011/07/how-to-replace-headlight-bulb.html

-----------
How to Replace a Headlight Switch

http://schematicsdiagram.blogspot.com/2011/07/how-to-replace-headlight-switch.html

----------
How to Replace a Headlight Assembly

http://schematicsdiagram.blogspot.com/2011/08/how-to-replace-headlight-assembly.html


How to Replace a Park Light Assembly

http://schematicsdiagram.blogspot.com/2011/08/how-to-replace-park-light-assembly.html

-----------

Low beam headlights Modification?

http://schematicsdiagram.blogspot.in/2012/04/low-beam-headlights-modification.html

----------

Headlight Assembly Removal On Honda Accord

http://technoanswers.blogspot.in/2012/06/headlight-assembly-removal-on-honda.html

---------------

Honda Headlight Assembly Removal
http://schematicsdiagram.blogspot.in/2012/06/honda-headlight-assembly-removal.html

-----------

How to Replace a Headlight Door

http://schematicsdiagram.blogspot.com/2011/08/how-to-replace-headlight-door.html

----------

How to replace HID headlight bulbs for lexus 400h?

http://schematicsdiagram.blogspot.com/2012/01/how-to-replace-hid-headlight-bulbs-for.html

----------------

These will help.

Thanks.

Nov 28, 2012 | 1986 GMC K1500

2 Answers

Headlight problems


If the lights work when moving or holding the high beam switch there is a good possibility the switch itself is bad. The switch is located at the base of the steering collumn. the handle actually only operates a rod that goes into the switch to push it down to switch from high to low beam. The switch is not expensive and easily accessable although you sorta have to stand on your head to reach it.

Feb 07, 2012 | 2000 Chevrolet Monte Carlo

3 Answers

Low beam headlights go out while driving.


check the headlight grounds
also check the daylight running light module

Jan 23, 2010 | 2005 Buick LeSabre

1 Answer

Headlights don't work, low or high beam-


Light switch bad or check all head lightrelays . 2 dim ones and 2 high beam ones. one is bad.

Mar 14, 2009 | 2005 Chrysler Town & Country

Not finding what you are looking for?
2005 Scion xB Logo

Related Topics:

44 people viewed this question

Ask a Question

Usually answered in minutes!

Top Scion Experts

yadayada
yadayada

Level 3 Expert

75051 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Brad Brown

Level 3 Expert

15451 Answers

Are you a Scion Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...