Question about 1994 Ford Explorer Limited

2 Answers

Looking for a diagram for ford explorer brakes

I am looking for a ford explorer brake diagram and i cant seem to find any

Posted by on

  • the_raven_si Jan 11, 2009

    im sorry i ment the brake assemblies diagram so i can change the brakes on my 94 explorer



2 Answers

  • Level 2:

    An expert who has achieved level 2 by getting 100 points


    An expert that gotĀ 5 achievements.


    An expert whose answer gotĀ voted for 20 times.


    An expert who has answered 20 questions.

  • Expert
  • 55 Answers

I'm not sure what you are looking for. Are you looking for brake line diagram? Diagram of brake assemblies? Vacumm diagram? Here's a couple, if they don't help, let me know exactly what you need.

looking for a diagram for ford explorer brakes - vacuumlinerouting.png

Posted on Jan 11, 2009

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Have repaired brakes. not running brake paddle is hard,but crank the paddle goes just abou 1" from floor and goes down easy as you hear air,is this a vaccum line?

Posted on Jan 02, 2011


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Good luck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer


on the fuse box inside by the steering wheel, #3 is for the left brake light and #7 is for the right one, they both use a 7.5A fuse.

Dec 21, 2014 | 1998 Ford Explorer

2 Answers

Why 1998 Ford Explorer brake lights on both sides won't work

Probably have ground wire shorting somewhere. Also could be that both lights are burnt out but highly unlikely. 3424655c-0c29-408e-b448-575e7e2ee10f.jpg

This is is a picture of the wiring diagram. Hopefully this helps.

Jul 07, 2014 | 1998 Ford Explorer

1 Answer

My 2005 ford explorer 2wd seems to lock up whenever I hit the brakes hard and then it jumps into gear. What could that be? Transmission is fine, breaks are fine.

I think it sounds like you really did have it looked at

Now you need a shop that goes for a ride with you
& hears the long version of the problem & experiences it

Then instead of looking they actually get out the wiring diagrams
& get serious about diagnosing what seems like an ABS Braking
System issue

May be completely wrong, but I have to guess based on your story

Bottom line, you have yet to address actually working on solving
this issue.

I see this on a thousand questions a week just on this site

People go to dealers & shops ,some many times,some never
leaving the vehicle or I guess the shops don't know why they are
there,because they don't even address the initial complaint or
even road test or the owner never goes for a ride & then come here
for a guess at it.

Jan 30, 2013 | 2005 Ford Explorer

1 Answer

Do you have fuse diagram for ford explorer 1999

ou can view the Owner Guide online ( which includes the fuse panel diagram ) at :

www . motorcraft service . com ( no spaces )
Click on Owner Guides

Nov 17, 2012 | 1999 Ford Explorer

1 Answer

Ford explorer fuses keeps popping for brake switch

To start with, it is impossible to look the wiring diagrams up or check to see what circuits the fuse protects if you do not mention WHICH fuse is blowing. It would also be very helpful to mention WHICH ENGINE and what type of TRANSMISSION your truck is equipped with because the wiring diagrams are different.

Also, WHAT grounds have continuity? Continuity to WHAT??? If you are trying to fix a fuse that keeps blowing, WHY are you checking GROUNDS??? Why do you have the brake switch off? It is not necessary to remove the brake switch to see if it is working.

I have no idea what "hot" you are talking about. The hot from the brake pedal switch? The two wires on the brake pedal switch on a 2000 Ford Explorer are LIGHT GREEN and LIGHT GREEN/RED...I have no clue what "blacks" you are talking about.

Try to make a little sense here and I will see if I can help you.

May 12, 2012 | 2000 Ford Explorer

2 Answers

Looking for a diagram for the fuse box on an 2002 ford explorer.

I suggest visit this link to downaload: 2002-Ford-Explorer Owners Manual

I hope helps with this (remember to rate this answer).

Oct 19, 2010 | 2002 Ford Explorer

1 Answer

Where can i check the clutch fluid on my 5sped 1997 ford explorer

On the drivers side firewall near the brake fluid reservior you will find the clutch fluid reservior, a small black plastic cap will be on top of it.

Apr 01, 2010 | 1997 Ford Explorer AWD

1 Answer

1991 Ford explorer XLT w/ rear ABS lock up

do you use your ebrake? did you use your e brake after it had't been used for a long time. sounds like the e brake might not be released all the way.

Aug 16, 2009 | 2002 Ford Explorer

Not finding what you are looking for?
1994 Ford Explorer Limited Logo

2,315 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts


Level 3 Expert

77932 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22306 Answers


Level 3 Expert

5648 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides