Question about Toyota Prius
Posted by Anonymous on
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
On mine I lifted up the arm,at the base where its connected to the car there is a little metal tap that sticks out. Pick up on the tab,at the same time release the arm. It should stay up. Then kind of wiggle the base near the tab while pulling up on the arm.It should come right off.Its on a spline like stub.Try to put it back on the same spline teeth it came off of.This keeps the arm in the proper place. Once off its easier to see how the blades come off. Try calling a large auto parts store to see if they have your proper blades. Most large auto parts stores will install the blades for you for free if you buy blades from them.Dont buy the cheapest ones, they dont last.
I hope this helps you.
Posted on Sep 09, 2009
this either has a nut on the base of the arm that needs to be removed or if no nut. then pull the arm away from the glass and there will be a meatal tab at the base of the arm that will slide to the side with this slid to the side the wiper arm is unlocked and will pop right off
Posted on Jan 12, 2010
remove the cover at the bootom of wiper arm,there you will see a nut that holds the arm, remove that nut. grab arm and wigle and pull up on it until it comes off, then install new arm in the same position.
Posted on Feb 24, 2010
SOURCE: replace the rear wiper arm shaft
There is a plastic cover that pops off at the pivot end of the wiper arm. pulling up on this with a hook of some kind from the furthest end should release it. Under it you will find a nut that holds the wiper arm to the shaft. It's quite common for the nut to come loose and the shaft spins without moving the arm. Try tightening this nut (with the ignition on, be sure the wiper motor is off, then turn off ignition and put the wiper arm in the parked position). This is a common problem if you've ever tried to turn on the wiper when it was frozen to the glass.
Posted on Feb 26, 2010
Tips for a great answer:
May 17, 2013 | 2008 Toyota Prius
May 22, 2012 | 2006 Toyota Prius
May 21, 2012 | 1988 Toyota Corolla 4 Door
Jun 01, 2011 | 1984 Toyota Celica Supra
May 18, 2010 | 1988 Toyota Pickup
Jan 12, 2010 | 1984 Toyota Celica
Dec 21, 2009 | 2004 Toyota Sienna
Aug 26, 2009 | 2007 Toyota Prius
Sep 22, 2008 | 1995 Toyota 4Runner
421 people viewed this question
Usually answered in minutes!