Question about Chrysler PT Cruiser

Open Question

2005 pt cruiser chirping

Once i start the car this chirping sound comes on non stop. even when im at a stop sign or red light you hear chirp chirp chirp but once the motor is running the chirping is constant

Posted by Anonymous on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 341 Answers

SOURCE: chirping noise from engine compartment on 1993 Camry

Sounds like a drive belt. With the car off, rub each belt on the underside of the belt, one at a time, with wax from a candle or crayon.Cover the entire width of the belt and 10 to 12 inches of it's length then start the car. If it is the noisy belt it will change or eliminate the noise.Do this for each belt shutting off the engine each time.Change all the belts even if you find just one bad one as the others won't be far behind.

Posted on Dec 14, 2008

  • 74 Answers

SOURCE: audi a4 turbo chirps when car is started

Could be the belt(s).

If not that, could be a loose hose coming from the turbo. If it build boost and the hose is loose, it'll chirp. At least, it would on my turbo bike. Sounded like a balloon releasing air when the neck is pinched.

Posted on Feb 10, 2009

  • 753 Answers

SOURCE: There's a chirping birdlime noise when the car is

Sounds like your serpentine belt is dried out.Replace your belt make sure belt tensioner is ok,or you can make sure that it is your belt by using a old candle or belt dressing that you can purchase from your local parts store.While engine is running VERY carefully touch the candle to the ribbed side of the belt and let the wax rub off onto the belt the squeak or chirp should change or go away.Or just spray the belt dressing on per the directions on the can.

Posted on Nov 19, 2009

  • 119 Answers

SOURCE: chirping sound coming from fan motor under dash.

remove blower motor and look for obstructions hitting cage(leaves etc.)possibly motor is worn internally

Posted on Feb 16, 2010

  • 149 Answers

SOURCE: I have a 2005 Jeep Wrangler Unlimited Rubicon - chirping noise

I had a similar issue on mine kept hering chirping from vents or dash, eventually it turned into a chirp with random "knock". took me forever to figure out it was the fan for the ac because of the speed change when driving but turned out to be related to the air comming in through the vents the faster i drove the faster fan blades wobbled. anyhow i poped the fan motor out and there were some leaves and stuff in the fan blades, i just cleaned it up a bit and it all stopped.

Posted on Feb 15, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

My car chirps while increasing speed and when I brake my vehicle.


It is possible that the broken tab is your problem because the tabs keep the hardware from moving, especially when you apply the brakes. To determine if this is the case, remove the tire,brake caliper, brake pads, and hardware. Put one of the lug nuts(or two if needed) back on to hold the rotor in place. Spin the rotor by hand and listen for that chirping sound. If you don't hear it, the hardware is the problem. If you can still hear it, check that metal plate that protects the back side of the rotor to make sure its not bent and rubbing against rotor. Also check that nothing is rubbing on the trans-axle(if its front-wheel drive). If all is well in these two places, the only thing left that spins in that area is the wheel bearing. They usually make more of a grinding or roaring sound but sounds can be tricky.. I am a mechanic for a car rental company and often have to diagnose problems by the sound they make. I hope this info is helpful.

Jan 17, 2016 | 2003 Buick LeSabre

2 Answers

Chirping noise when accelerating


If it is a belt noise, sprinkling baby powder on the belt will make the noise go away. Apply liberaly with engine off onto the belt and start the vehicle. The belt may have gotten coolant on it and this will cause the chirp. Also a defective belt tensioner will cause the belt to chirp

Jan 04, 2016 | 2002 Ford Taurus

1 Answer

PT Criuser has been running hot and now makes a loud chirping sound when cranked up . What causes this ?


my guess is your water pump is not working properly and the loud chirping sound is from the serpentine belt which also runs the water pump, alternator, ac and steering pump. first thing to check is coolant the cooling fan , thermostat , water pump in this order. chirping sound definitely come from the belt but the cause could come from any of the driven part but im zeroing in on the water pump because the car is running hot. old belt could also cause the chirping.

Aug 16, 2014 | 2004 Chrysler PT Cruiser

1 Answer

2013 Dodge Avenger has chirping noise in front driver side wheel, chirp speeds up when accerating.


Hi I am veer singh from delhi, india. I am using the dr morepen blood pressure monitor for long time around 8 mounth. This bp monitor quality is very good, and now I can check my bp easily at home through this bp machine, I would like to say thanks to you for your blog.

Jan 18, 2014 | Dodge Cars & Trucks

1 Answer

I have a 1996 3.8 liter camaro. I was driving my car down the road when the gages started jumping and i found out that problem it was the battery and aldernater well after i changed them problems i have...


Hmmm, a puzzle.

The only way to disarm these alarms is with
the factory remote or turning on the ignition.
To turn off the factory alarm.

Ok, do you have the remotes?
If so, let's ID the system.
Go to www.KEYLESSRIDE.com & use th fcc #s
on the back of it.

If not try this:

Programming Factory Security on GM Cars and Trucks
Instructions for programming the GM factory security systems that do NOT
disarm from the driver's door key cylinder. This programming is for the
cars and trucks listed below.

96+ Camaro
96+ Firebird
99+ GM Trucks
99+ GM Sport Utility Vehicles

Step #1 Turn the ignition on then off.

Step #2 Remove the radio fuse only (not the fuse that says acc/radio).

Step #3 Turn the key to the accessory position. When you do this you
will get two chirps from the door buzzer. Should you hear only
one chirp, your vehicle does not have factory security and these
instructions do not apply. You need to hear two chirps.

Step #4 Press the unlock switch on the door. This will give 1-4 chirps
depending on the program step. Continue pressing the unlock
switch until you get to the desired chirp setting.
1 Chirp - Security off
2 Chirps - Remote Only
3 Chirps - Factory Setting
4 Chirps - Passive Arming

Step #5 Turn the ignition off.

Step #6 Put radio fuse back in.

Jul 03, 2011 | 1996 Chevrolet Camaro

2 Answers

1999 ford expedition make noise when idle but stop when pickup speed. make a chirping sound when idle .i check pulleys & belt (ok) disconnect belt but still make chirping sound


Might be your water pump. Check for drips of antifreeze
Usually the bottom of the pump has a weep hole and the 1st sign besides the noise is antifreeze dripping from the weep hole

Jan 08, 2011 | 1999 Ford Expedition

2 Answers

Service tire monitor light is on


is it just a dummy light on the dash or is it more specific like L.F tire low,ect? if its a dummy light then you need to go to a garage with a tire pressure monitor service to to check to see if the batteries in the monitors are still good or if you are just dealing with a leaking tire. If you Tahoe uses wheel speed sensors to monitor tires and pressure you may have a faulty wheel speed sensor or a heads up that your wheel bearing is wearing and the gap between the tone ring and sensor have increase or decreased good luck

Apr 07, 2010 | 2005 Chevrolet Tahoe

3 Answers

I have a 2005 Jeep Wrangler Unlimited Rubicon - chirping noise


have a local repair facility look at the front and rear universal joints

Mar 09, 2010 | 2005 Jeep Wrangler

3 Answers

Abs brakes chirping noise, when pedal depressed,


worn out brake pads and slightly warped rotors. Most brake pads have small steel tabs that touch the rotor at a 90 degree angle when it is time for replacement. if you keep driving on the worn pads, it will stop chirping but that just means the tabs (also called wear indicators) have broken off and repair is about to get very pricey.

Feb 28, 2010 | 2001 Mitsubishi Montero

1 Answer

Audi a4 turbo chirps when car is started


Could be the belt(s).

If not that, could be a loose hose coming from the turbo. If it build boost and the hose is loose, it'll chirp. At least, it would on my turbo bike. Sounded like a balloon releasing air when the neck is pinched.

Dec 24, 2008 | 2002 Audi A4

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

32 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chrysler Experts

yadayada
yadayada

Level 3 Expert

75005 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7711 Answers

Are you a Chrysler Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...