Question about 2001 Mazda 626
Inertia switch for fuel shut off
Posted by Anonymous on
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
1. Relieve the fuel pressure and disconnect the negative battery cable.
2. If not already removed, depress the clips on each end of the rear seat cushion and remove the cushion.
3. If not already done, detach the electrical connector from the fuel pump/sending unit.
4. Remove the attaching screws from the fuel pump/sending unit access cover and remove the cover.
5. Disconnect the fuel supply and return hoses from the fuel pump/sending unit.
6. Remove the attaching screws and the fuel pump/sending unit from the fuel tank.
7. Detach the sending unit electrical connector, remove the sending unit attaching nuts and remove the sending unit from the fuel pump assembly.
1. Attach the sending unit to the fuel pump assembly and install the nuts. attach the sending unit electrical connector.
2. Install the fuel pump/sending unit into the fuel tank with a new gasket and install the mounting screws.
3. Connect the fuel supply and return lines.
4. Install the access cover and the mounting screws.
5. Attach the sending unit electrical connector.
6. Position the rear seat cushion over the floor, making sure to align the retaining pins with the clips. Push down firmly until the two retaining pins are locked into the rear seat retaining clips.
7. Connect the negative battery cable, start the engine and check for proper system operation and for fuel leaks.
Posted on Jun 13, 2009
Could be a spark plug wire is wrong.. Just two that are almost right will make a vehical do that or the plugs could need a little more space adjusted in the gap. Or it could be a hose that is lose or has a hole in it.
Posted on Jul 20, 2009
shift cable or linkage is broke or poped off
Posted on Nov 17, 2009
Testimonial: "Finally had my very busy mechanic friend take a look last night and indeed that was the problem. Thanks so much!"
yes it isn't that much if you buy them.they slide inside the coupler and release the line.
Posted on Dec 27, 2009
Testimonial: "Thank you didn't know if there was a tool for this."
Tips for a great answer:
Sep 06, 2016 | 1998 Mazda 626
Mar 26, 2016 | 2001 Mazda 626
Jan 11, 2016 | Mazda Cars & Trucks
Oct 21, 2015 | Mazda Cars & Trucks
May 25, 2015 | 2000 Mazda 626
Aug 12, 2014 | Cars & Trucks
Jul 27, 2014 | 1994 Mazda 626
Jul 23, 2014 | 1994 Mazda 626
Jul 12, 2011 | 1995 Mazda 626
Mar 31, 2011 | 1995 Mazda 626
155 people viewed this question
Usually answered in minutes!