Question about 2000 Acura TL

Open Question

How to replace fuel pressure regulator for 2000 Aucra TL

Posted by Anonymous on

2 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 60 Answers

SOURCE: 1999 acura tl 3.2 fuel pump pressure

between 2 and a half and 3 and a half bar

Posted on Apr 02, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

2000 Chevy 1500 4.8L has 20 lbs fuel pressure. Pump ? Pressure regulator ? Replaced pump GM recommended & still same problem


Fuel Pressure Regulator and Control at AutoZone.com ...

www.autozone.com/fuel.../fuel-pressure-regulator-and-control
AutoZoneShop for Fuel Pressure Regulator and Control products with confidence at AutoZone.com. Parts are just part of what we do.

Sep 24, 2015 | Cars & Trucks

1 Answer

Have a 03 aucra tl keep blowing up the radiator


check to make sure that pressure cap rating is appropriate, and check that hoses are intact and free flowing...also check that cooling fans operate...

Apr 14, 2013 | 2003 Acura 3.2TL

1 Answer

Getting codes P0171 and P1740 on my OBD


The first code P0171 is car running lean, the 2nd code which is Aucra specific is "4th pressure switch circuit malfunction" which is an internal gearbox issue, Unfortunately you will need to take it to a garage as it's not a simple fix.

Mar 06, 2012 | 2000 Acura TL

1 Answer

When I park my 2000 acura tl it has a strong odor of gasoline in the garage. it is hard to start and the fuel economy has gotten bad.


more than likely cause for this is a gas leak more than likely one the metal lines under the car has gotten rusty and started to leak
another possibility is a injector is leaking or pressure regulator is bad and it dumping to much fuel into motor but this will usually trigger a engine light (code would be a o2 sensor or bank 1 to rich or bank 2 to rich) also might also have black smoke coming out exhaust
So if u dont have any engine codes more than likely cause is a fuel line leaking

Jan 12, 2011 | 2000 Acura TL

1 Answer

How to replace fuel pressure regulator 2000 Olds. Alero V-6


relieve fuel system pressure. on the v6, detach the fuel return line from the fuel pressure regulator. remove the mounting fasteners, and detach fuel regulator from rail. on the v6 install the fuel return line before tightening the regulator mounting screws. otherwise a leak could develop. be sure to replace all O-ring seals, and coat them with a lite coat of oil. have a good one !!

Dec 22, 2010 | 2000 Oldsmobile Alero

1 Answer

I need to replace de fuel presurre sensor in a pontiac montana ,do i have to just replace the sensor ,o the sensor came with the fuel pump?thank you


Replacing the fuel pressure regulator, involves just replacing the regulator at the end of the fuel rail in the engine compartment, but fuel pressure sensor - does this mini-van have a fuel pressure sensor?
replacing the fuel pressure regulator: (1) locate it at the end of the fuel rail in the engine compartment,
(2) relieve fuel system pressure (3) disconnect fuel pressure regulator vacuum line. (4) remove fuel pressure regulator retaining screw (retain for re-use (5) using a shop towel to catch spilled fuel, lift & twist Fuel pressure regulator to remove it from the fuel rail. (6) remove/discard retainer and spacer bracket from the fuel rail. (7) remove fuel pressure regulator from the engine fuel return pipe. (8) remove/discard Fuel Pressure Regulator inlet O-ring (9) Check Fuel Pressure Regulator filter screen for contamination - if contaminated, replace Fuel Pressure Regulator. (10) Lubricate new Fuel Pressure Regulator inlet O-ring with clean engine oil & install onto the Fuel Pressure Regulator inlet. (11) Install the fuel return pipe onto the Fuel Pressure regulator (12) Install new retainer & spacer bracket into the slot on the fuel rail.
(13) Install Fuel Pressure Regulator onto Fuel Rail & tighten Engine Fuel Return Pipe nut to 13 ft-lbs (17 Nm). (14) connect Fuel Pressure Regulator vacuum line, (15) Install Fuel Pressure Regulator attachng screw & tighten to 76 in-lbs (8.5 Nm). (16) Inspect & verify that retainer & spacer bracket is engaged in the slots on the fuel rail. Grasp & pull on the Fuel Pressure Regulator.
to ensure that the Fuel Pressure Regulator is properly seated. (17) inspect for fuel leaks with this
procedure: On 2sec,(holy rollers), off 10sec will be left on, inspect for leaks while running.

Dec 11, 2010 | 2000 Pontiac Montana

1 Answer

1998 acura fuel pressure continues


it have a pressure regulator in a fuel rail, whats is the problem? I want to help you.

Jun 01, 2010 | 1998 Acura TL

2 Answers

After running my acura 2000 for over 10 miles [getting engine nice and hot] or more, turn off the engine go into the house for 10 -15 minutes, go back out start the engine try to go the engine spits and...


It could be the fuel pressure regulator, the regulator is vacuum operated. When the diaphram ruptures gas is allowed to go directly into the intake manifold, through the regulator. So, when you shut the engine off, there is still pressure in the fuel system, with a ruptured diaphram the gas can leak through the vacuum line into the manifold. Thus, flooding the engine. If you pull the vacuum line off the regulator and it's wet with gas that's the problem. The part is about $100 from Napa Auto Parts.

Mar 10, 2010 | 2000 Acura TL

1 Answer

Where is fuel pressure regulatore located


For 2000 Chevrolet Truck Blazer 4WD 4.3L SFI 6cyl
If your engine is a 4.3L V-6 with CPI (central point injection) it is inside the upper intake manifold. The upper intake manifold is bolted on top of the normal intake manifold.

The throttle body is mounted on it and your fuel lines terminate into the center of this.


Removal & Installation
  1. Relieve the fuel system pressure.
  2. Remove the air cleaner outlet resonator.
  3. Disconnect the engine wiring harness from the retaining clips at the front of the engine.
  4. Disconnect the fuel pressure regulator vacuum line.
  5. Clean any dirt from the fuel pressure regulator and the surrounding area.
  6. Disconnect the fuel return pipe.
  7. Remove the fuel return pipe retainer.
  8. Remove the fuel pressure regulator retainer.
  9. Remove the fuel pressure regulator.
  10. Inspect the regulator filter screen for contamination. If contaminated, replace the fuel pressure regulator.
To install:


aaf5240.jpg
Fig. Fuel pressure regulator-4.2L engine
  1. Install the regulator filter.
  2. Install the new O-ring on the fuel pressure regulator.
  3. Lubricate the fuel pressure regulator O-ring with clean engine oil.
  4. Push the fuel pressure regulator into the regulator housing on the fuel rail.
  5. Install the fuel pressure regulator retainer. Tighten the regulator retainer screw to 71 inch lbs. (8 Nm).
  6. Install the fuel return pipe retainer. Tighten the return pipe retainer screw to 71 inch lbs. (8 Nm).
  7. Connect the fuel return pipe.
  8. Connect the fuel pressure regulator vacuum line.
  9. Connect the negative battery cable.
  10. Inspect for leaks:
    1. Turn ON the ignition for 2 seconds.
    2. Turn OFF the ignition for 10 seconds.
    3. Turn ON the ignition.
    4. Inspect for fuel leaks.
  11. Install the engine wiring harness into the retaining clips at the front of the engine.
  12. Install the air intake resonator.
Hope help with this (remember rated this post).

Feb 26, 2010 | 2000 Chevrolet Blazer

1 Answer

2004 tl hard start problem? taking 2 or 3 times of turning the key to start


check fuel pressure and the fuel pressure regulator. if you have an intake clean the mass air flow sensor

Nov 06, 2009 | 2004 Acura TL

Not finding what you are looking for?
2000 Acura TL Logo

Related Topics:

61 people viewed this question

Ask a Question

Usually answered in minutes!

Top Acura Experts

yadayada
yadayada

Level 3 Expert

75066 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7754 Answers

Are you an Acura Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...