Question about 1998 Toyota Corolla

Open Question

1998 toyota corolla a/c light is blinking - 1998 Toyota Corolla

Posted by Anonymous on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 1 Answer

SOURCE: Replacment of a dash light. Toyota Corolla 1998

There is a plastic garnish surrounding the instrument cluster held in by 2 philips head screws. remove the screws and gently pry the garnish from top first then sides then it should pull out.

Then remove the 3 screws holding the cluster in place (2 bottom 1 top). Once that is done gently flip the cluster bottom up and pull out some to expose the wiring harness. Remove the 3 connectors from the back and then the cluster will pull out.

There are 3 bulbs that control the overall lighting of the cluster. They are spaced about every third across the rear of the cluster. They are the larger Green knobs. Remove the 3 large green knobs and replace the bulbs with the appropriate size. You can call your local parts store to find out the size.

Its a 5 minute job and does not require the entire removal of the dash board.

-ASE Master Tech
-Lexus Senior Tech
99 Corolla Owner.

Posted on Apr 25, 2009

  • 14 Answers

SOURCE: How do you rplace an ignition lock cylinder on a 98 toyota corolla

You can do this one yourself if you want it does not require removing the steering wheel. just the plastic housing from the steering column.
remove housing/cover. then look at housing with cylinder lock assem. on bottom about 1.2 inches or so from the end of the lock assembly you will see a very small hole insert metal pin into hole and push in while turning the key in the ignition backwards to accessory positionyou will feel the pin your pushing move in a bit, then you should be able to pull the cylinder assembly out. insert new assembly with key in the same position and turn forward this will install your new assemlby then reassemble your plastic column covers.

Posted on May 26, 2009

  • 9 Answers

SOURCE: wondering if a 1998 toyota corolla will fit in a 2000 corolla

In 1998 the 1zz-fe engine was intoduced. Toyota only added variable valve timing in the 2000-2002 1zz Corolla engines. Same engine same parts and components

Computers should not need swapped but you could go to the dealer and ask for the part number for 1998-2002 ECU's for Corolla. This is the electronic control modul on the car that runs the engines.It is usually located under the dash by the passengers side glove box.

Posted on May 27, 2009

buffalonyman
  • 1865 Answers

SOURCE: My 1998 Toyota Carolla brake lights do not work

Check the brake switch

Posted on Sep 13, 2009

Testimonial: "Thanks for the help"

  • 149 Answers

SOURCE: 1998 Toy Corolla Air Bag Light keeps flashing

take it to another dealer, in most cases its just a poor connection, poor contact in one of the pin connectors, air bag wiring is very sensative,one poor pin connection does not allways mean that the harness needs to be replaced, it sounds like they dont want to take the time to pinpoint the problem.

Posted on Oct 17, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have toyota corolla 98 its overdrive light blinking please help me


O/D light flashing indicates a fault in the transmission. Manuall diagnose by bridging terminals Te1 and e1 on the diagnostic socket. refer to repair manual on the code got.

Nov 04, 2013 | 1998 Toyota Corolla

1 Answer

How do I get the security light to stop blinking on my dash board


how do stop the security light to stop blinking on my 2005 toyota corolla

May 23, 2010 | 2005 Toyota Corolla

1 Answer

Rear lights on my toyota corolla won't work at night


do your front park lights work? if so then problem is at the rear first check your light bulbs could have had a serge in power and blown both of them . do you carry anything in trunk that could have cut the wiring harness?

Jan 09, 2010 | 1998 Toyota Corolla

1 Answer

Red blinking light (98 toyota corolla)


that is a security system light for a alarm.

Jul 14, 2009 | 1998 Toyota Corolla

1 Answer

Toyota corolla 1998 brake light replacement...


pop the trunk open and remove the panels right behind the light, untwist the harness and replace the bulb, good luck and god bless, rate me please!

Jun 05, 2009 | 1998 Toyota Corolla

1 Answer

98 toyota corolla radio, dome light, and power locks don't work


2005 toyota corolla radio,dome light,alarm and power locks dont work.

Apr 26, 2009 | 1998 Toyota Corolla

Not finding what you are looking for?
1998 Toyota Corolla Logo

Related Topics:

210 people viewed this question

Ask a Question

Usually answered in minutes!

Top Toyota Experts

yadayada
yadayada

Level 3 Expert

75051 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7726 Answers

Are you a Toyota Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...