Question about 1997 Chevrolet Cavalier

Open Question

2001 chev cavalier front axle and seal diagram

Posted by Anonymous on

6 Suggested Answers

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017

  • 149 Answers

SOURCE: Front End Noise, Chev Cavalier

It sounds like you have a bad c v or constant velocity joint. Look under the car next to the wheel look for a rubber accordian type unit, if the rubber is torn or lose the grease has escaped and damaged the joint. You can replace it yourself, but if your not mechanically inclined would say take it to a shop.

Posted on Mar 05, 2009

  • 20 Answers

SOURCE: how to replace a right rear axle seal in a 2001

you must remove all brake parts then you get to the axle easy to do with the right tools

Posted on Jul 22, 2009

  • 14036 Answers

SOURCE: how to remove rear axle to replace axle seal?


Posted on Mar 04, 2010

  • 1 Answer

SOURCE: 04 chevy silverado 4x4 left front axle removal

how to remove front axle on chevy 4x4

Posted on Oct 16, 2010

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

I need a diagram of a 2001 dodge ram 1500 four wheel drive front axle

Search Results
    images for I need a diagram of a 2001 dodge 1500

    Replace front axle seals 1998 Dodge Ram 4X4, part 1 ...

    ? 14:28
    Nov 1, 2010 - Uploaded by spelunkerd
    If you have gear oil leaking from a front axle tube then this is a ...a circular hole saw (he says about 2-2 1/4"), grinding the teeth down, ... Hey my 2001 ram has a big puddle coming from it'sdriver side wheel could this be it?.

Feb 08, 2016 | Dodge Cars & Trucks

1 Answer

Where is speed sensor on 97 chev cavalier

The speed sensor is one of the 18 or so sensors that enable the transmission to operate smoothly. It detects the speed of the front wheels at the axle and relays this information to the transmission control module.

You will find the sensor assembly on the top of the front right axle. In other words, it's on the passenger side of the Cavalier.

Jun 28, 2015 | Cars & Trucks

1 Answer

I need a diagram of the axle shaft and seal placement try this website, about half way down the page there is an exploded view of axle. hope this helps

Nov 14, 2011 | 2001 Ford F350 Super Duty SuperCab

1 Answer

On a 2001 volkswagen cabrio does the axle assembly seal on the passenger side need to be flush with the transmission? The seal on mine is about 1/2 inch out, but it is the same distance out all the way...

this should be fine, take note its not a axle seal, its the output seal to drive flange, where the axle then bolt too.correct? if so then this should be fine,as long as the output cup doesnt hit when installed,heres a diagram from factory, on this diagram the seal also doesnt sit flush but just make sure you have the correct seal, i would double check that.40156d3.gif

Mar 22, 2010 | 2001 Volkswagen Cabrio

1 Answer

How to replace a right rear axle seal in a 2001 chev tracker

you must remove all brake parts then you get to the axle easy to do with the right tools

Jul 20, 2009 | 2001 Chevrolet Tracker

2 Answers

Chevrolet Cavalier Bumper

Headlight and parking lights are different

97 cavalier:

2001 cavalier:

Only way it would work is to do the 01 conversion by switching the whole doghouse (fenders, hood, bumper, lights, etc.) It can be done though.

Mar 27, 2009 | 2001 Chevrolet Cavalier

1 Answer

Left front axle seal

This is a fairly involved job. You will have to remove the brake assy, then seperate the ball joint and remove the axle assy. You will need a seal puller to remove the axle seal (At trans I assume) and a seal driver or something flat to install the seal. You will also need a 32mm socket ( if my memory is correct ) for the axle nut and a torx or hex socket for the brake caliper and a splitting fork for the balljoint. Be sure to tourque the axle nut to spec when reinstalling or you will be replacing a wheel bearing next. Hope this helps...Good Luck.

Feb 05, 2009 | 2003 Chevrolet Cavalier

1 Answer

Chev Cavalier 2003 only one rear turn/brake/hazard light

I have a 2002 Chev Cavalier that had the same exact problem. I replaced the bulb harness (purchased from a chevy dealership for around $5) which was fairly easy to do. I have had zero problems with it since.

Sep 15, 2008 | 2001 Chevrolet Cavalier

Not finding what you are looking for?
1997 Chevrolet Cavalier Logo

Related Topics:

23 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts


Level 3 Expert

75066 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7754 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides