Question about 1992 Ford Ranger

Open Question

No brake fluid to rear brakes 1990 ranger

No brake fluid getting to rear brakes

Posted by Anonymous on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Good luck!

Posted on Jan 02, 2017

Ad
emissionwiz
  • 78335 Answers

SOURCE: 1989 Ford ranger rear antilock light on rear brakes lock up

metal particles on the trigger wheel sensor of the rear differential case, this causes a loose of signal and the light to come on. also a broken tooth on the trigger wheel inside the diff can cause this or a dirty/corroded connection to the sensor from water intrusion.

Posted on Dec 19, 2008

Ad
rockitman187
  • 2559 Answers

SOURCE: brake line diagram

There are 2 pieces,but you shouldn't need to replace them both,
You have 2 (metal) on each side of the differential running towards the wheels.one is shorter than the other and meet at a small distribution block



Please rate this fixya solution.

Posted on Jan 23, 2009

  • 1 Answer

SOURCE: 1991 Ford Ranger w/ABS Rear brakes lockup

i have a 94 ranger with abs (front only) make sure it has sensors@ back

Posted on Jan 30, 2009

  • 79 Answers

SOURCE: need a diagram for rear brakes on 2000 ford ranger

173d393.jpg\

I just replace mine this weekend. I know how you feel.

Posted on Feb 17, 2009

  • 512 Answers

SOURCE: I need a diagram for the rear drum brake for 2002 Ford Ranger

Copy and paste this into your search window: 2002 ford ranger rear brake diagram

You should see four pictures pop up, select the brake parts diagram or the brake picture.

Posted on Sep 03, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

What causes rear wheels to bounce while braking about 35 to 25 mph 1990 ford ranger.


brake slip air in line. , weak shocks, lose bushes,shock mount, leaking brake fluid or contaminated disc or pads.

Feb 01, 2018 | Ford Cars & Trucks

1 Answer

1989 ford ranger, no fluid flows to bleed rear brakes. (has anti-lock brakes)


there is actually a trick that works most times, when you go to bleed the rear turn the key to on, the pump will allow the fluid out to the rear.

Sep 20, 2011 | 1989 Ford Ranger

1 Answer

1990 Reatta. Replaced all calipers and hoses. Cannot get fluid to rear brakes. Porportioning valve is OK. No fluid coming to it. Is there a way to cycle the master cylinder valves to cycle fluid...


I would try replaceing the master clylender and rebleed the brakes start at the right rear have some one help you press the brake paddle down and hold it open bleeder its where the brake line connects to the brakes looks like a greese fitting open the bleeder then close it let brake paddle back up repeat until you have fluid comeing out of bleeder go to the left rear do the same then right front to left front

Aug 23, 2011 | 1990 Buick Reatta

1 Answer

The brake cylinder in the rear drum of a 93 ford ranger broke, how do i replace it


Remove wheel, brake drum, and brake shoes. The cylinder is the part the brake line goes into and it spreads the brake shoes apart when you brake.

Loosen the brake line but do not take off, unbolt the cylinder and then disconnect brake line. loosely connect the brake line to the new cylinder so you do not loose much brake fluid, bolt new cylinder in and then tighten the brake line.
Reinstall shoes. There should be a bleeding screw/grease head in the brake cylinder, loosen this and have someone step on the brake to bleed the line, have them hold the brake while you tighten the bleed screw. Do this as many times as necessary until brake fluid only with no air comes out.
Reinstall drum and tire, top off brake fluid.

Mar 16, 2010 | 1993 Ford Ranger SuperCab

1 Answer

Need a full brake line diagram for 1992 ford


Too many variables here. Is there fluid in the master cylinder in the rear brake portion? Does a brake warning light come on when the brakes are applied? Is the pedal solid when braking or does it feel spongy? You could have a problem with the metering or proportioning valve. Since brakes are a safety item I suggest you check with one of the shops that offers free brake inspections.

Jan 16, 2010 | 1992 Ford Ranger

1 Answer

1990 ford ranger rear brake cylinder leaks, how hard is this to replace?


this is an easy fix bro it should be drum brakes their is a rebuild kit you can get for it at most any parts store my best advise would be to lay the brakes out the way they come of so their is no confusion as to how it goes back

Mar 28, 2009 | 1990 Ford Ranger SuperCab

2 Answers

When brake is applied,the rear light on the panel come on.


You might wanna have your rear brakes checked along with the rear brake calipers or cylinders, as well as the rear drums or discs, depending on weather your car has rear drum brakes or rear discs brakes. Some cars come equipped with brake sensors that let you know when theres a problem. It would also be a good idea to check you brake fluid level.

Mar 12, 2009 | 1990 Toyota Camry

1 Answer

Wheel is locking up on 88 ranger


U need to pull the rear drum off to see what's going on. Check to see if the brakes and drum look wet. There may be a leak in the brake cylinder or axle seal. The leaking oil/brake fluid can cause what u describe. Does this happen all the time, or only after using the brakes for a while? If there is some type of fluid leak, it needs to be fixed, and your should replace the brake shoes and all hardware. Let me know what u find, or if u need further help.

Jan 07, 2009 | 1988 Ford Ranger

1 Answer

Rear wheel brakes lock up


It could be a couple of things..Either you have a fluid leak and its getting on the brake pads making them grab or it could be the abs system itself.. There is a speed sensor on the rear axle which also controls the abs.. That can be changed easily and isnt too expensive.. Kip

Jun 24, 2008 | 1998 Ford Ranger SuperCab

Not finding what you are looking for?
1992 Ford Ranger Logo

Related Topics:

66 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

78289 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22326 Answers

fordexpert

Level 3 Expert

5655 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...